Directions Meanings of icons: Forbidding: forbid improper operations to avoid damaging the Module. Caution: cautions for operators to avoid potential damages. Please note and remember. Importance: important information, common notes, definitions, general knowledge and references, etc. Other trademarks and trade name may be used in this manual to refer to either the entities claiming the marks and names or their products.
Content Directions ....................................................................................................................... 1 Safety Precautions......................................................................................................... 3 FCC Compliance ............................................................................................................ 4 1 Knowing Your Module ................................................................................................
Safety Precautions 1. DO NOT press or touch the LCD Screen. DO NOT place the Module with small items, they may scratch LCD Screen or enter the Module. 2. DO NOT expose the Module to dirty or dusty environment. Keep the environment clean and dry. 3. DO NOT place the Module on uneven or unstable work surface. 4. DO NOT place or drop objects on the top of the Module. DO NOT shove any foreign objects into the Module. DO NOT cover the LCD Screen strongly. 5.
FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with limits for Class B digital device, pursuant to part 15 of the FCC Rules.
1 Knowing Your Module 1-1 Front & Side View 1. UART 3 8. Earphone Jack 2. UART 0 9. Micro SD Port 3. Microphone Port 10. Home button 4. Keys 11. Menu button 5. Mini-USB OTG & HOST Port 12. Return button 6. Mini-HDMI Output Port (reserve) 13. LCD Touch-sensitive Screen 7. Audio Jack (reserve) 1-2 Rear View 1.
2 Caring the Module The Module is a precision device; the error operation may damage the device. 2-1 LCD Screen LCD Screen is the most delicate component of the Module and comprised of thin glass. It may be broken up by external abrupt force. DO NOT scratch the cover of the Module, or the scrape on the cover cannot remove. DO NOT cover the LCD Screen strongly, or else damage may occur. DO NOT place objects on the keyboard to avoid damaging the screen and keyboard when you cover the LCD Screen.
4. Turn on the Module after drying it. 2-3 If the water comes into the Module DO NOT turn on the Module immediately. Disconnect the outlet cable and detach the Battery Pack in order to turn off the Module, instead of pressing the POWER button to turn off it. Disconnect all external devices. Spill out the water from the Module. Use a soft and waterish paper or cloth to wipe the surface of the Module lightly.
3 Traveling with the Module Turn off the Module and disconnect all lines before moving it. Following the below steps, if you want to travel with your Module. Attention 1. Turn off the Module and disconnect from the wall outlets. 2. Shut down the LCD Screen completely and smoothly. 3. Disconnect the AC lines. 4. Disconnect all lines. 5. Place the Module in carrying case to protect it from dirt, water, shock and scratches before traveling. 6.
5 Get to know your system The first time you turn on the Module, you need to unlock by dragging the lock icon towards the top-corner of screen and enter the Home Screen, (需要解锁吗?)which makes it easy for you to access frequently used functions. There is a touch board on the right panel of the unit with which you can: Click the button to enter the Home screen. Click the button to display the available menu of the current screen. Click the button to return.
Click any item and enter its submenu to add the related shortcut icon on the Home Screen. Shortcuts: choose any application, kinds of Bookmark, music in playlist and items in settings and add it to Home Screen; Widgets: add any spare part to Home Screen; Folders: create folder shortcut; Wallpapers: choose the desired picture in SD card to change the current wallpaper.
6 For system security Settings Wireless & networkings 1. Wi-Fi Turn on the Wifi switch and choose one available network in the list after auto-searched; click “Connect” and the system will auto connect in “Wi-Fi settings”. Some networks may require a password, which you should enter according to the prompted information on screen. If you need to set a new wireless network connection, please click “Add Wi-Fi network” to input as indication. 2.
Silent mode: to make all sounds except media & alarms are silenced. Animation: to show the windows with animation or not. Screen timeout: to select the time amount to turn off the screen automatically. The screen will auto access the standby mde while there is no operation in fixed seconds. Location & security: To set the password for the system to login. Applications: To view and do more operation about the local application.
Email Setup an account 1. Using the on-screen keyboard to type the available email address and email password and click Next : 2. Select the incoming server type, e.g: POP3: 3. Check the account information again and click Next to start connection: Note: ensure that you have input the correct incoming and outgoing server name.
Set an account to access IMP webmail: 1. Using the on-screen keyboard to type the email address and email password and click Next; 2. Select the incoming server type, e.g: IMP(IMP Webmail); 3. Check the input accout information again and click Next to start connection. Set an account to access Miscrosoft Exchange webmail: 1. Using the on-screen keyboard to type the email address and email password and click Next; 2. Select the incoming server type, e.g: Exchange(Miscrosoft Exchange); 3.
Usage statistics: show the running applications in the system as the sort-out. Window animations: set the desired item to control the animation speed of window. Transition animations: control the refresh rate on the system and it can speed up the system. Font size: change system font size as necessary. End button behavior: Change the function of the end button as you like.
5. DO NOT place the Module into the dirty carrying case to again. Q4:Why the system cannot be recovered? A: 1. Damage from External memory or built-in memory: If the data are saved to an error memory address, the data cannot restore. 2. Incompatible external device: The system may enter the standby mode and cannot resume, when the incompatible external device is connected to the Module. 3. Error from drive program or application program: The system may refuse to operate some files (file formats: .
Operating Humidity 35%-85% Storage Temperature -20-55℃ Storage Humidity 20%-93% Power Adapter AC 100~240V; DC 12V Output Power (maximum) <24W Port Standard LAN IEEE802.11b/g Audio Port Earphone Jack, Microphone Port Mini-USB Port Two Ports:One is mini USB HOST,the other is mini USB OTG Micro SD Card Port Support Micro-SD Card Physical Features Weight TBD Dimension 293X194X24mm Design and specifications are subject to change without notice. The # symbol means that the item is optional.