Quick Guide

mBox smart pillbox
Quick Guide
• Step 1：
Scan the QR code on the back
of the pillbox with WeChat
TM
,
then follow the official account
• Step5
● Scan the bar-
code on the
package for
auto-setup
● Step6
● Verify your
cellphone
number
The setup is complete.
● Click “Health Manage-
ment”
from the bottom menu
• Step 3:
● Go back to the WeChat
official account, click”
others” from the bottom
menu; select WIFI Setup
● Open the pillbox, wait for
the middle LED light to turn
on, then close the pillbox
● Repeat opening and clos-
ing the pillbox two more
times till the LED start
flashing
● Then click “next”
• Step4:
● Input WIFI password
• Attention
● The pillbox connects to the same
WIFI your phone is using and only
2.4GHz WIFI is supported.
● If your phone is connected to 5GHz
WIFI, the pillbox won’t connect. You
should switch your phone’s WIFI
network to 2.4GHz WIFI first, then
repeat Step3.
• Step 2:
● Click the “scan” icon to
scan the QR code on the
back of the
pillbox one
more Time.
1 2
3 4
5 6