User Instruction 4K Dash Camera TE-DVR-DL4K Caution Ensure you are using your Car DVR within your countries’ road laws. Please make sure you are familiar with your local road legislation before use. Avoid leaving your Car DVR in direct sunlight for extended periods of time in an unventilated space. Please set time and date before you use this device to record. The notification given by the Car DVR are suggestions only, please drive to actual conditions.
1. Introduction Thank you for purchasing our Car DVR. We are certain that our product will give you trouble free operation while providing you with a safety feature that enhances your driving experience. Our products, like most after-market safety enhanced devices, are designing to assist and aid the driver, not to replace the manual function of the person operating the vehicle. Please read through these instructions before attempting to install this product.
2.2 Installing the Car DVR 2.2.1 .Remove the protective stickers from the Car DVR and protective paper from suction mount. 2.2.2 Find a right position on the windscreen and fix it. 2.2.3 Adjust the device position 1).Adjust the horizontal view angle by turn the camera left & right. 2).Adjust the vertical view angle by move up and down on the mount or sticker. 2.3 Connecting to Power Only use the included charger to power and charge the Car DVR. 1).
3.1 Video mode ◆ The device will automatically start recording after the car is started, and the red recording icon will flash in the upper left corner of the screen during recording. ◆ During the recording process, press [OK] once to stop recording, and the camera will be in the standby mode; press the [OK] again can resume recording ◆ During recording, press the once, the display of the front and back cameras can be switched. 3.2 Photo mode ◆ When in standby, Long press to switch to Photo Mode.
In the main menu of the Recording Mode, press to adjust to the “Resolution”, when its background color turns blue, press the [OK]. ◆ Short press , to choose the resolution, and press [OK] to confirm. ◆ Short press the to return to homepage of the VIDEO mode. ◆ 4.1.2 Loop Recording (Off/ 1 Minute/ 2 Minutes/ 3 Minutes) In the main menu of the Recording Mode, press to adjust to the “Loop Recording”, when its background color turns blue, press the [OK].
4.1.4 Motion Detection (Off/ On) ◆ In the main menu of the Recording Mode, press to switch to the “Motion Detection”, when its background color turns blue, press the [OK]. ◆ press , to adjust to the option that needs to be set, and press [OK] to confirm. Note: When this function is turned on, the camera will automatically start and stop recording according to the movement of the object during recording. 4.1.
confirm. Note: This function adjusts the sensitivity of the machine to automatically lock the image during video recording. Automatically locking the image when the high sensitivity is set may cause the memory card to be full and not loop recording. 4.1.6 WiFi (Off/ On) In the main menu of the Recording Mode, press to adjust to the “WiFi” option, when its background color turns blue, press [OK] to confirm. ◆ Press and to adjust to the option which needs to be set, and press [OK] to confirm. ◆ 4.
4.2.2 Exposure Comp (-1/3, -2/3, -1.0, -4/3, -5/3, -2.0, +0.0 +1/3, +2/3, +1.0, +4/3, + 5/3,+2.0) In the main menu of the Photo Mode, press to adjust to the “Exposure Comp” , when its background color turns blue, press [OK]. ◆ After entering the EV value, you can set the EV value between -2 and +2, and press the [OK] to confirm.
4.3 Playback Mode 4.3.1 Delete (Delete Current/ Delete All) In the Playback Mode, press to enter the main menu. ◆ In the Playback Mode menu, press to the “Delete” option, when its background color of turns blue, press [OK]. ◆ Press to choose delete current or all, and press [Cancel] / [OK] to confirm. Note: If you want to delete an video, you must unlock it. Because locked files cannot be deleted. ◆ 4.3.
Setting the Time and Date allows you to stamp your footage with the time as a reference. ◆ In the System Setting Menu, press to enter slide show, when its background color turns blue, press [OK] to confirm. ◆ Press , to adjust the Year, then short press to confirm, and press [OK] to confirm after the adjustment is complete. ◆ After entering the date/time setting, press to adjust the Year/ Month/ Day/ Hour/ Minute/ Second in turn.
Note: This function is set to eliminate the flickering or ripple problem of the light in the video screen. 4.4.4 Screen Save (Off/ 1 Minute/ 3 Minutes/ 5 Minutes/ 10 Minutes) In the System Setting Menu, press to select the setting options of the screen save, when its background color turns blue, press the [OK]. ◆ After entering the screen saver, you can choose one, and press [OK] to confirm.
In the System Setting Menu, press to switch to the “Format” option, when the format background color turns blue, press [OK] to confirm. ◆ Display the memory card options, press [OK] to confirm, and then press to select cancel or confirm. ◆ After selecting and confirming, press [OK] to confirm, and the memory card will be formatted. Note: This function will delete all images and photos of the memory card, please operate with caution. ◆ 4.4.
6. Connecting camera to PC After the SD card is inserted into the camera, connect it to the computer with a USB cable. At this time, two options will appear on the camera's screen: ◆ 1 Storage: A removable disk will appear on the computer, and the device will enter U disk mode. In this mode, the recorded files can be copied or cut to the computer for playback. ② Camera: The camera can be used as a PC CAM. Note: Connect to the computer via a USB cable.
8. Specification IPS screen 3inch Resolution 4K+ FHD P25/ QHD+FHD P30/ FHD P30+FHD P30 Video Format MP4 Video zip Format H.264 TF card Class10, 8GB-32GB(max) Frequency 50Hz/60Hz USB USB2.0 High-speed.
FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.