iBaby Monitor Model: M6/M6T User Manual 1
Index 1 Introduction..............................................................................................................................3 1.1 The package contents ................................................................................................3 1.2 Function and Features ...............................................................................................3 1.3 Product Specification ............................................................................................
1 Introduction The iBaby monitor works with your iPod touch, iPhone or iPad so you can see and hear your baby anytime, anywhere as long as you are connected to the internet (including Wi-Fi, 3G/4G network, etc.). From your free app, you set motion/sound alerts, zoom in and snap photos so you never miss an important moment. "This product is meant for providing convenience for baby monitoring. The manufacturer is not responsible for any legal liability caused by negligence. " 1.
1.3 Product Specification Model:M6 P2P Support P2P Monitor automatically get the IOS device is Features WIFI setting currently connected Wi-Fi account and password Cloud Storage Support the pictures stored in the cloud OS Embedded Linux OS CPU 32Bit RSIC Embedded Processor Compression H.264 baseline Frame rate Max.30fps Resolution HD(1280*720),VGA(640*480),QVGA(320*240) CPU Video Brightness, contrast, resolution is adjustable, Image Rotation Mirror /Flip Lens f=4.3mm, F=2.
User Access Support 12 users visiting on the same time TCP/IP ， HTTP ， UDP ， DHCP ， Protocol UPNP,NTP,P2P WIFI IP address DHCP IP address Protocol Support 802.
Monitor size: 108mm(L)*108mm(W) Size Package size: 173.5mm(L)*173.5mm(W)*175mm(H) Weight Weight ： 558g Power Adapter , Quick start guide Package contents Warranty card , Magnetic base Software IOS6.0 or later App is free to download from App Store Certification Certification FCC CE ROSH 2 Appearance and interface 2.
device is searching for network. Red indicates the device is on low battery. Orange indicates the device is charging. The default state of status indicator is on. You can turn it off via the iBaby View app on your iPod Touch, iPhone or iPad. 2.
3 Set-up and Installation Ensure your Apple iOS device is connected to your home Wi-Fi network From the App Store, download “iBaby View M6” on to your supported mobile device Plug the power adapter into the camera and into an electrical outlet The camera will take a minute to power on. Wait for the tone before proceeding Connect the USB cable from your mobile device to the camera The message “Share Wi-Fi Settings” will appear.
4 FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
