Jump Ringz Instruction Manual Model: JR-001
Introduction Thank you for purchasing the Jump Ringz! The Jump Ringz is an individual customer time-management system designed for entertainment facilities that sell services based on time purchases. These include trampoline parks, water parks, Family Entertainment Centers, etc. Getting Started The Jump Ringz system comes in two packages. The larger box includes the Charge Station and the smaller box consists of the Jump Ringz bands, Scanner and other accessories listed below.
Charger Station Set Up The Charge Station is designed for plug and play functionality. Remove the Charge Station from the box, remove the packing material, and determine a suitable location for the station. Optimal positioning requires a readily accessible, dedicated 110v AC power outlet. (We offer different power capabilities, so please ensure that you have the proper power supply for use). To prevent tipping, mount or anchor the Charge Station to the ground (mounting and anchoring supplies not included).
Jump Ringz Operation Each Jump Ringz band requires a Jump Ringz clip (D) to lock the band in place when in use. Once the proper band size is set with the pin, cover the pin with the Jump Ringz clip to securely fasten the band. To remove the clip, simply place the Jump Ringz key (E) on the clip and the locking mechanism will release the band. Please see the Jump Ringz band image “loop and lock with Clip and Key.
Scanner Scanner Charging The Scanner handle has a unique magnetic port (6) that connects to a standard USB cable for charging. When charging, The Scanner's LED lights will flash to indicate its current charge power level. When fully charged, all 4 LED lights (9) will be illuminated. Jump Ringz Activation To prepare the Scanner for operation, turn on the unit (1) and select one of the preset time buttons (3). Direct the scanner antenna (8) to the round face of the Jump Ringz band and pull the trigger (5).
Belt Clip and Safety Cord The Scanner has an attached belt clip (7) and safety cord (10) to prevent accidental drops. In order to prevent damage to the Scanners, all handlers should use the belt clip and/or safety cord to attach the Scanner to their person. Maintenance The Jump Ringz bands can be replaced over time. It is a modular system and the core can be removed as shown in the included diagrams. Replacement bands can be purchased separately and come in two size options.
BATTERY WARNING: · The Scanner and Jump Ringz Bands are equipped with an integrated lithium battery. The battery cannot be replaced. Do not attempt to remove the battery from the device. · Do not dispose of in fire or expose to excessive heat. · Do not crush, puncture, incinerate, or short circuit external contacts. · Please recycle or dispose of the battery and housing properly. Contact your local recycling facilities and/or the manufacturer for further information.
