Wireless Repeater 1200M-ZJQ User Guide 1
Wireless Repeater 1200M-ZJQ User Guide table of Contents 1 INTRODUCTION ........................................................................................................................ 1 1.1 Brief Introduction ................................................................................................................ 1 1.2 Features ............................................................................................................................... 1 1.3 Appearance ....................
Wireless Repeater 1200M-ZJQ User Guide 1 Introduction 1.1 Brief Introduction 1200M-ZJQ is a wireless signal repeater specially designed for large-sized households designed by HongYu Technology Co., Ltd. It works in the 2.4GHz and 5GHz frequency bands and provides a wireless rate of up to 1200Mbps. It is your first choice for enhancing wireless signals and enjoying high-speed WiFi. 1.2 ⚫ ⚫ ⚫ 1.3 Features Support dual-band simultaneous Extend, providing up to 300Mbps (2.
Wireless Repeater 1200M-ZJQ User Guide 2
Wireless Repeater 1200M-ZJQ User Guide WPS button on the front Rset button on the side Reset Button After pressing and holding the Reset button for more than 5 seconds, when the Repeater LED blink quickly, the repeater will be restored to the factory settings. At this time, you can release the button and the repeater will automatically reboot. WPS Button Press the WPS button, and then press the WPS button of the main router, the repeater will automatically connect to the main router via WPS.
Wireless Repeater 1200M-ZJQ User Guide Step3 After a while, the phone will automatically jump to the management page of the repeater; if not, please open the browser and enter "192.168.19.1" in the address bar to log in manually. Step4 After entering the management page, we click [START] to configure.
Wireless Repeater 1200M-ZJQ User Guide Step5 Select extended wireless information. After the repeater automatically searches for the surrounding WiFi, select the wireless network to be extended, and click [Next] to continue. The default 2.4G and 5G dual-band simultaneous extend, can also be configured to only use single-band extend.
Wireless Repeater 1200M-ZJQ User Guide ⚫ Scenario 2: Single-band extend 6
Wireless Repeater 1200M-ZJQ User Guide Tips: If the WiFi Name of the router to be extended is not in the list, please click [Refresh]. Step6 Extended WiFi. If the main WiFi to be extended is encrypted, please enter its wireless password.
Wireless Repeater 1200M-ZJQ User Guide ⚫ Scenario 2: Single-band extend 8
Wireless Repeater 1200M-ZJQ User Guide Step7 Configure the wireless information of the repeater. ⚫ Scenario 1: When dual-band is Extended at the same time, the default wireless name of the repeater is followed by the name of the main WiFi with a "-Ext" suffix, and the password is the same as that of the main WiFi, which can be manually modified.
Wireless Repeater 1200M-ZJQ User Guide ⚫ Scenario 2: In the case of single-band extend, the default wireless name of the configured frequency band is followed by the "-Ext" suffix of the main WiFi name. The password is the same as the main WiFi password and can be manually modified. The Repeater WiFi of the un-extend frequency band needs to be entered manually.
Wireless Repeater 1200M-ZJQ User Guide Step8 Settings Finished! The preview page after the setting is completed can help you confirm the previous input content. If the confirmation is correct, click [Finish Settings] to apply setting. If the Repeater LED light on, it means the extend is successful.
Wireless Repeater 1200M-ZJQ User Guide Complete Exit the browser, connect to the wireless name of the repeater, enter the wireless password, and you can go online. ⚫ The wireless name and password of the repeater: set in Step 6, if not set, it is same with the extended main WiFi. ⚫ If you need to configure the Repeater again, please reset the repeater to the factory setting, and then configure it according to the first configuration method.
Wireless Repeater 1200M-ZJQ User Guide 3 Set up a repeater using a PC 3.1 First Repeater settings Step1 Plug the repeater into the power outlet and wait for the WiFi LED to blink and the repeater is started. Step2 Use a PC to search for and connect to the wireless network of the repeater: XY1200AC_XXXX or XY1200AC_5G_XXXX。 Step3 Open the browser and enter "192.168.19.1" in the address bar to log in manually.
Wireless Repeater 1200M-ZJQ User Guide Step4 After entering the management page, we click [Repeater] to configure. Step5 After the repeater automatically searches for the surrounding WiFi, select the wireless network that needs to be extended. The default 2.4G and 5G dual-band simultaneous extend, can also be configured to only use single-band extend.
Wireless Repeater 1200M-ZJQ User Guide Tips If the name of the router to be Extended is not in the list, please click [Refresh]. Step6 Repeater Setting. If the wireless WiFi to be extended is encrypted, please enter its wireless password. You can turn on [Set Repeater WiFi] to modify the wireless name and password of the repeater. It is not enabled by default. The name of the repeater will use the main WiFi name followed by the "-Ext" suffix, and the password is the same as the main WiFi .
Wireless Repeater 1200M-ZJQ User Guide ⚫ Dual-band. Turn on [Set Repeater WiFi], you can configure the WiFi name and password of the dual-band. ⚫ Single-Band. Turn on [Set Repeater WiFi], you can configure the WiFi name and password of the repeater.
Wireless Repeater 1200M-ZJQ User Guide Step7 Click [Apply] to complete the setting. Wait for the repeater application to take effect. If the Repeater LED light on, it means the extend is successful. Complete Exit the browser, reconnect the wireless name of the repeater, enter the wireless password, and you can go online. ⚫ If you need to set up the repeater again, you can reset the repeater to the factory setting, and then configure it according to the first configuration method. 3.
Wireless Repeater 1200M-ZJQ User Guide Step2 Set the computer's IP address:192.168.19.2。 Step3 Open the browser and enter "192.168.19.1" in the address bar to log in manually. Complete 3.2.1 Status After the repeater setting is completed, log in to the [Status] page of the repeater, and you can view the repeater status and running status of the extend.
Wireless Repeater 1200M-ZJQ User Guide 3.2.2 Repeater Enter the [Repeater] page, you can set the Extend again. 3.2.3 LAN Enter [LAN] page, you can configure LAN information.
Wireless Repeater 1200M-ZJQ User Guide 3.2.4 Wireless Enter the [Wireless] page, you can configure the WiFi information of the repeater. 3.2.5 Advance Enter the [Advance] page, you can Reboot, Reset,and Upgrade the firmware of the repeater.
Wireless Repeater 1200M-ZJQ User Guide 21
Wireless Repeater 1200M-ZJQ User Guide FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
