Audiolab 7000A User Manual
1: Important Safety Information This lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel.
impeded by covering the ventilation openings with items such as newspaper, tablecloths, curtains etc. WARNING: Only use attachments/accessories specified or provided by the manufacturer (such as the exclusive supply adapter, battery etc.). WARNING: Please refer to the information on the exterior panel of the enclosure for electrical and safety information before installing or operating the apparatus. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance. This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. The Bluetooth® word mark and logos are registered trademarks, owned by Bluetooth SIG, Inc. and any use of such marks by IAG Group Ltd is under license.
2: Contents Audiolab 7000A Getting Started Control and Function Remote Headset Connection Menu Options System Operation Playing Operation Warranty Specification
1.Getting Started Introduction of 7000A Welcome to the Audiolab 7000A. ESS9038 and we hope you will enjoy its performance for many years to come. Please read through this manual to obtain the very best performance from your 7000A.
• Pre-amplifier output • Loudspeaker output • Headphone output • 12V Trigger output Unpacking the Equipment The carton should contain: • The Audiolab 7000A • One IEC power cord suitable for your area • One remote handset • One instruction manual Please note: The remote control requires 2 x AAA type batteries. Due to international shipping and courier regulations with Lithium-Ion batteries, the remote controller battery is not included in this package.
2.
3.
4.Connections Analogue Inputs(Line) Connect your analogue sources to one of the three line-level inputs, AUX1, AUX2 or AUX3. Phono Input(MM) Connect your turntable (moving magnet cartridge) to the phono input. Connect the earth lead from your turntable (if available) to the ground terminal. Coaxial Digital Input Connect your coaxial digital sources to either COAX1 or COAX2. Optical Digital Input Connect your optical digital sources to either OPT1 or OPT2.
V Trigger Connection The 7000A features two 12V trigger connections, one output and one input. Use the output to control other products. Use the input when the 7000A is to be controlled. The trigger connections are made using "3.5 to 3.5mm" jack interconnects (not include). Mains Input Before connecting the AC power cord to the 7000A, please make sure the Power Switch is in the OFF position. Switch it to the ON position after connecting the unit to the AC mains.
5.Menu Options Filter Configure the digital filter for the audio DAC. Linear Phase (Slow Roll-Off) is the default setting. Someone may prefer one type of filter over others. • Linear Phase (Fast Roll-Off) – Select the Select the Linear Phase Fast Roll-Off filter. • Linear Phase (Slow Roll-Off) – Select the Linear Phase Slow Roll-Off filter(default). • Apodizing (Fast Roll-Off) – Select the Apodizing Fast Roll-Off filter. • Minimum Phase (Fast Roll-Off) – Select the Minimum Phase Fast Roll-Off filter.
Upsampling 7000A will extend the sampling rate to 352.8/384kHz by default. You can set OFF as you prefer. DPLL This setting is used for changing the bandwidth of the digital phase lock loop of the D/A converter to accommodate different levels of jitter on the incoming SPDIF signal. Normal mode should be selected for signals with low jitter, while Wide mode should be selected for signals with abnormal jitter.
Balance Adjust the Left and Right balance of the 7000A output stage. Input Sensitivity It provides additional volume control offset values for AUX/XLR/PHONO. You can enter the sub menus to set the value by remote control or MODE knob.
Volume/Power On Limit Power On Limit sets the maximum out of standby volume level. When coming out of standby the volume will be set to the level used at the end of the previous session or to the Power On Limit value whichever is lowest. This will avoid a sudden loud signal at the beginning of a new session. Display Option Access the various display options for the 7000A front panel display.
Display Settings Brightness: Adjust the brightness of the 7000A front panel display. Display Time Out: Adjust the time at which the 7000A display will revert to your chosen display option, from the home screen, after performing volume adjust and other operations.
Trigger Activate or deactivate the 12V trigger function of the 7000A. Language There are multiple different languages you can choose from to display your system so you can view information in your preferred language. Default language is English.
Standby The auto standby feature will by default put the unit into standby after 20 minutes of inactivity. This feature can be configured and set to 20 minutes, 60 minutes or Never. Reset Reset the 7000A to the factory default settings.
Version Check the current operation firmware version of System and PC USB.
6.System Operations Switching on and off Switch on all source units before switching on power 7000A. When switching On: the power LED illuminates. When switching Off: switch off 7000A before the source units. Standby Mode The 7000A will enter standby mode after being powered on. Press the “Standby” button to bring the 7000A out of standby, the power indicator LED becomes brighter and the display shows “Audiolab” welcome screen while the unit is getting ready for operation.
MODE POWER AMP IN PRE OUT HEADPHONE OUT LOUDSPEAKERS PRE DISABLE ACTIVE ACTIVE DISABLE PRE POWER ACTIVE ACTIVE ACTIVE ACTIVE INTEGRATED DISABLE ACTIVE ACTIVE ACTIVE Integrated Mode The pre-amplifier section is internally connected to the power amplifier, pre-amplifier output is also operational in this mode. A second power amplifier can be connected for bi-amplification as shown in the diagram.
The Menu The menu enables you to customize the unit and optimize the interface with other equipment in your system. 7000A has 13 different menu pages. Press the MENU key on the remote to enter menu mode,and then press VOL- or VOL+ to turn to different setting, confirm to the sub menu. You can also press MODE knob on the front to enter the menu, then rotate it to turn to different setting, press to the sub menu. Press again to confirm.
7.Playing Operations Playing PC USB input USB DRIVERS To download Windows Drivers, please see the separate manual. Any firmware updates will also be available from www.audiolab.co.uk Connect your computer to 7000A via USB cable (type A to Type B), change the source to PC USB using the handset or the SELECT button on the front panel. “No Input Signal “will be displayed if there is no input signal to the USB input.
8.Warranty(参照 Omnia 增加保修二维码内容) Audiolab Ltd. warrants this product, subject to the terms and conditions below, to be free from defects in materials and workmanship. During the warranty period Audiolab will repair or replace (at Audiolab’s option) this product, or any defective part in this product, if it is found to be defective due to faulty materials, workmanship or function. The warranty period may vary from country to country.
This warranty provides benefits that are additional to and do not affect your statutory rights as a consumer. Some countries and U.S. states do not allow the exclusion or limitation of incidental or consequential damages or implied warranties so the exclusions in the paragraph above may not apply to you. This warranty gives you specific legal rights, and you may have other statutory rights, which vary from state to state or county to county.
9.Specification BRAND Model General description Design philosophy and core technology Audiolab 7000A Integrated Amplifier 2x70W(8ohm) / 2x110W(4ohm) Class AB ES9038Q2M 32-bit DAC 2.8" 480x640 large size full view IPS LCD Built in certified hardware MQA Full decoder (PC USB,Coax/Optical) Support Bluetooth 5.
4.5mV (Phone MM, Volume=0dB) Input Impedance 10K(Line) 47K // 100pF(Phono MM) Total Harmonic Distortion (THD) Frequency response Output voltage < 0.0005% (1KHz @ 2V, Volume = 0dB) 20Hz-20kHz 2.3V max. (Volume = 0dB) 100 ohm Output impedance Signal-to-Noise ratio (+/-0.1dB) > 110dB (Line,A-weighted) > 76dB (Phono MM,A-weighted) DAC D to A Converter Total Harmonic Distortion (THD) ES9038Q2M < 0.0006% (1KHz @ 0dBFS) 2.05Vrms Output level (0dBFS, 1KHz) Max.
Signal-to-Noise ratio (S/N) Max. Output Current > 110dB (A-weighted) 9A Headphone Amplifier Total Harmonic Distortion (THD) Output Impedance Load impedance < 0.01% (1kHz, 50mW ) 4 ohm 20-600 ohm General Standby Power Consumption <0.5W Net weight 9.
