Installation Instructions

Mounting and Installation
Drill the four mounting holes
Step 2Step 1
Install the mounting plate
using the four screws
Option 1: Flush Wall Mount
Paste sticker on the back
of the mounting plate
Ensure the glass surface is
clean and dry
The mount sheet can be
temporary fixed on the other
side of the glass to locate the
area for the cover sheet.
Affix the mounting plate
to the glass surface
Option 2: Mounting on Glass
Plug in the required cables
to the room panel
Lock the room panel to the
mounting plate using a
screw at each corner
The room panel is ready to
be brought online
Attach the room panel to the
mounting plate
Plug in the required cables
to the room panel
Attach the room panel
to the mounting plate
Lock the room panel using a
screw at the top, and two
screws at the outside corners
The room panel is ready
to be brought online
Install the mounting plate
using the four screws
Drill the four mounting
holes
Option 3: Mounting close to a window frame
Align the mounting sheet guide
parallel to the window frame
Paste the mount sheet on
the wall
Step 3
Plug in the required cables
to the room panel
The room panel is ready
to be brought online
Step 4
Attach the room panel to
the mounting plate
Lock the room panel to the
mounting plate using a
screw at each corner
Step 5 Step 6 Step 7
1.Affix the cover sheet to the
glass surface.
2.Align the mounting plate to
the cover sheet with the
kensington lock hole.
Step 1 Step 2 Step 3 Step 4
Step 5 Step 6 Step 7 Step 8
Step 1 Step 2
Window frame Window frame Window frame
Window frame
Window frame
Window frame
Step 3 Step 4
Step 5 Step 6 Step 7
Boot up1
System Setup
5 Set content
4
Users can set content by clicking "Set Content" to enter
the URL or use the desired content manage-ment
system to upload the contents onto the room panel.
To change room panel system language, select
“ (Current Language) ....
-
rations, select “Advanced.”
2
1
2
Set correct time, date, and time zone for
properly scheduled playback.
Set password to prevent unauthorized
access during setup menu.
Set network for establishing network
connection.
3
Resetting room panel to factory default
Factory resetting the room panel will result in the removal of all saved contents,
to complete the room panel factory resetting process:
Use a pen to press and hold the reset button - do not release until Step 4.1
Insert the power cord. 2
Wait 30 seconds for the system reboot indicating your data is erased.3
Release the reset button and your room panel will initialize in factory
default state.
4
Content Management
content management solution.
How do I interrupt playback and enter setup menu?
Use USB mouse to click and hold one corner of the screen for 10 seconds to exit
playback and enter setup menu.
How do I provide a DEBUG log for a misbehaving room panel to the support team?
Please follow the instructions below to collect the room panel's DEBUG log:
Troubleshooting
Prepare a blank USB stick in FAT-32 format.1
Create a folder named "DEBUG" (case insensitive) in the root of USB stick.2
Make sure the room panel is operating (see welcome screen or playing content).3
Insert the USB stick into room panel and wait for
4
Within the "DEBUG" folder, is a folder with a string of number as its name. If
the string of numbers are all zero's, the debug log has not been collected
properly. Repeat step 1-4 again and make sure to wait
.
5
6 Zip the"DEBUG" folder and send to IAdea Support Team.
room panel
configurations:
Screw M3*13
Screw M3*13
Screw of cover plate
Screw of cover plate
Screw of cover
plate
Screw of cover
plate
Screw M3*13
Screw of cover
plate
Screw M3*13
Screw M3*6
Cover sheet
Screw M3*13
IAD_DGS_WRP_10EP