U S E R M A N U A L XDS-1588 Series IAdea 15.
IAdea 15.
IAdea 15.
IAdea 15.6” All-In-One Meeting Room Signboard with Touch Installation: Significant temperature deviations and changes in elevation or environment can lead the glass panel of the smart signboard to trap a slight amount of moisture. To avoid damaging the smart signboard, the condensation will require at least 2 - 4 hours to evaporate prior to usage.
IAdea 15.6” All-In-One Meeting Room Signboard with Touch 3 Firmly slide the smart signboard downwards to ensure the pocket and the hook are properly latched together. 4 Fasten the flush mount bracket screw, which is only accessible from the bottom plane of the mounted smart signboard, by using a Phillips-head screwdriver.
IAdea 15.6” All-In-One Meeting Room Signboard with Touch 3 4 To change smart signboard system language of XDS-1588, use touch or USB mouse to select “(Current Language) ....” For system configurations, select “Advanced.” Important recommended configurations: 1 Set correct time, date, and time zone for properly scheduled playback. 2 Set password to prevent unauthorized access during setup menu. 3 Set network for establishing network connection.
IAdea 15.6” All-In-One Meeting Room Signboard with Touch Technical Specification: 7 Display 15.6” LCD panel 10 points capacitive multi-touch 300 nits maximum brightness 1920 x 1080 (Full HD) panel resolution Viewing angle (H/V): 178/178 Internal Player Processor: Cortex-A17 1.8 GHz Quad-Core System memory: 2.0 GB Flash memory: 8 GB eMMC built-in Video Format Supported H.264/AVC up to 1080p (1920 x 1080) H.
IAdea 15.6” All-In-One Meeting Room Signboard with Touch 8 Connectivity SD card slot (expendable to 64 GB) Micro USB for ADB (Android Debug Bridge) 3.5 mm audio out USB 2.
Proof of Certificate This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
