REMOTE BEACON ILLUMINATOR www.gsmoutdoors.
IC STATEMENT This device complies with Canada ICES-005(B)/NMB-005(B) This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. INCLUDED ITEMS 1. 2. 3. 4. 5. 6. 7.
ABOUT The Remote Beacon Indicator (RBI) is intended to be mounted to a tree stand to illuminate the tree stand steps for safety. It can also assist in locating a well- hidden tree stand. 2 FCC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
PRODUCT IDENTIFICATION WARNINGS & DISCLOSURES 1. 2. 3. 4. Batteries included are not rechargeable. Trying to recharge can cause damage to battery and unit. If handled improperly, the battery may break or leak causing possible corrosion of the device or clothes. It is recommended that the same model battery is used for battery replacement. Batteries should not come into contact with other metal objects, such as: keys, coins, etc. as this may cause the battery to overheat or short circuit.
SETUP Installing batteries Remove battery cap by turning the cap clockwise. Insert the included AA batteries in the proper orientation (refer to (+) and (-) marks on the RBI). Reinstall the battery cap by turning clockwise. WARRANTY This MUDDY product is covered by a one-year limited warranty. This warranty covers product with manufacturer defects. Normal wear & tear as well as product abuse are not covered by the warranty.
OPERATION Pressing the button on the RBI remote will cause all paired RBI units within range to illuminate. The remote activator can be paired to additional RBI units by following these steps: The remote activator functions at a range of up to 150 yards. 1. The light on the RBI units will turn off automatically after 3 minutes. Light may be tuned off manually by pressing the button on the RBI unit. 8 REMOTE PAIRING 2. 3.
INSTALLATION CLAMP ADJUSTMENT The RBI is designed for installation on square tubing used on MUDDY brand tree stands (¾” – 1”; 20-25mm) The RBI will also clamp onto round tubing (¾” – 1”; 20-25mm) Add or remove clamp spacers (included) as needed) Adjustable clamp can be mounted on horizontal or vertical tubing, with a wide range of adjustments possible in either orientation. Remove the center thumbscrew to change the orientation of the clamp.