(Cover) i.
(Page 0) Contents Bluetooth Buzzer Clip Headset……………..………………………………………2 Getting Started………………..……………..………………………………………3 Charging Your Headset…………………………………………………………….4-5 Nominal Charging Time…………………………………………………………5 Talk & Standby Time………………………………………………………….5 Low Battery……………………………………………………………………...5 Turning Your Headset On and Off…………………………………………………….6 Turning the Built-in Buzzer On and Off………………………………………………6 Pairing Your Headset………..
(Page 1) Bluetooth Buzzer Clip Headset Overview Microphone Charging Socket Earpiece Jet and removable earpiece for Stereo Volume Dual LED Multifunction Button(MFB) Earpiece Built-in Buzzer Fig. 1 Built-in rechargeable battery Getting Started To use your i.
Page 2 Wearing Your i.
Page 3 Charging Your Headset Fig. 4 The Headset comes with a built-in rechargeable battery. Prior to using the headset, it is recommendable to charge the battery fully for the first time.
Page 5 Charging Your Headset Connect the charger to an AC wall outlet and the charger plug to the headset’s charging socket (fig.4). The LED will be red while charging. IMPORTANT Charging indication will be delayed for a few seconds if the headset has not been used for a long time or the battery is drained. Nominal Charging Time Charging the battery fully is normally within 3 hours. When the battery is fully charged, the LED will turn blue and remains on for 30 minutes.
Page 6 Turning Your Headset On and Off Turning On the Headset Press and hold the MFB for 2 seconds until you hear a short beep. The LED will flash blue. IMPORTANT Press the MFB again each time you turn on the headset to reactivate pairing so that the connection between the headset and the mobile handset is resumed. For pairing, please refer to “Pairing Your Headset” on page 7-8. Turning Off the Headset Press and hold the MFB for 3 seconds until you hear a long beep. The LED flash stops.
Page 7 Pairing Your Headset Prior to using your Headset for the first time, you must pair it with a Bluetooth-enabled mobile handset. The information on the next page describes pairing instruction for typical Bluetooth-enabled mobile handset. Headset pairing procedure is subject to different models of mobile handsets.
Page 8 Pairing Your Headset 1. Place the headset and the mobile handset where they are easily viewable by no more than 1 meter apart. 2. Ensure the headset is OFF. 3. Press and hold the MFB until the headset LED alternately flashes blue and red. 4. Activate your mobile handset’s Bluetooth function by referring to your mobile handset user guide for details. 5. Set the mobile handset to search for Bluetooth devices within about 1 meter as instructed in the mobile handset user guide and select “i.
Page 9 Using Your Headset Answering a Call When there is an incoming call, you will hear ringing through the earphone and the built-in buzzer. Press the MFB to accept the call or answer the call via your mobile handset in the normal way. If you want to stop the buzzer from ringing, press the Volume Key once. You now only hear the ringing tone through the earphone.
Page 10 Using Your Headset Voice Dialling from Your Headset If your mobile handset is equipped with a voice dialling function, simply press the MFB on your headset and when you hear a beep, say the voice tag. IMPORTANT Please make sure to record voice tag into the mobile handset first before using voice dialling function. Last Number Redialling from Your Headset Press the MFB on your headset twice. IMPORTANT The above functions are only applicable to mobile handsets with Bluetooth Handsfree Profile.
Page 11 Adjusting the Volume Press the Volume Key repeatedly until you reach the desired volume level. Resetting / Removing the Pairing You may want to reset the headset to its original settings. This also clears all current pairings. 1. Ensure the headset is OFF. 2. Press and hold the Volume Key until the LED alternately flashes blue and red rapidly. 3. Release the Volume Key. 4. Press and hold the Volume Key again until you hear 2 beeps. 5.
Page 12 Care and Maintenance Headset Consider turning your headset off before placing it in your pocket or bag. If the MFB is accidentally depressed, your mobile handset may place an unintended call. Do not expose the headset to liquid, moisture or humidity as it is not waterproof. Do not use abrasive cleaning solvents to clean the headset. Do not expose the headset to extremely high or low temperatures. Do not dispose of the headset in a fire as it will result in explosion.
Page 13 Built-in Battery Do not attempt to replace the headset’s battery yourself as it is in-built and is not changeable. Charge the battery in accordance with the instruction supplied with this user guide. Only use the manufacturer supplied charger when charging the headset. Charging Only use the manufacturer supplied charger when charging the headset. Do not disassemble the charger as it may expose you to dangerous voltages of other risks.
Page 14 Safety Information Check local laws regarding use of a mobile handset and headset while driving. If you use the headset while driving, ensure your attention and focus remains on your responsibility of driving safely. Never allow children to play with the headset – small parts may be a choking hazard. Observe all signs that require an electrical device or RF radio product to be switched off in designated areas. These could include hospitals, blasting areas, and potentially explosive atmospheres.
Page 15 Troubleshooting If you are unable to connect your headset and mobile handset, please try the following: Ensure your headset is turned off and is properly charged. Ensure the headset is paired with your mobile handset. Ensure your mobile handset’s Bluetooth feature is activated. Please refer to your mobile handset user guide for specific instruction.
Page 16 Product Specifications Bluetooth Specification: Version 1.2 Class 2 Bluetooth Profile Supported: Headset, Handsfree and A2DP Range of Frequency: 2.4GHz Spectrum Dimensions: 53.6mm (L) x 24.8mm (W) x 23.6mm (H) Nominal Charging Time: Within 3 hours Talk Time*: Up to 6 hours Standby Time*: Up to 150 hours Weight: 30.
(Back Cover) © 2005 Hutchison Harbour Ring Enterprises Limited All rights in this publication are reserved and no part may be reproduced without the prior written permission of the publisher. The contents of this publication are believed to be correct at the time of going to press, but any information, specifications, products or services mentioned may be modified, supplemented or withdrawn without further notice. The Stylized i.