USER MANUAL My103L
INDEX ANATOMY....................................................1 INSTALLATION............................................2 1. SIM Card...................................................................2 2. Battery .......................................................................3 BASICS ........................................................5 1. Turn it on/off .............................................................5 2. Make a call .......................................................
ANATOMY 4pin slot Left soft key Right soft key Navigation key End key Power on/off Call key Battery door
INSTALLATION 1. SIM Card ①. Push the hook of the battery door on the back of phone. ②. Slide down and detach the battery door ③. Insert SIM card into the SIM slot in the right direction. Caution: Don’t bend or scratch your SIM card. Keep it away from static electricity, water and dirt.
2. Battery ④. Connect the battery plug with the slot of phone. Caution: The plug and slot have the direction and it will be connected only in the right direction. ⑤. Lay the battery and close the door Caution: New battery is not fully charged.
⑥. Connect the DC adapter with Phone and plug the DC adapter into your power outlet. ⑦. Insert the plug of DC adapter into the slot of Phone.
BASICS 1. Turn it on/off To turn on your phone, press and hold “End key” for a few seconds or until the display turns on. If prompted, enter your 4-digit PIN code. Caution: If you enter an incorrect PIN code 3 times in a row, your SIM card is disabled and your display shows SIM Blocked. Contact your service provider. To turn off your phone, press and hold “End key” for a few seconds 2. Make a call 1) Enter phone number which you want to call. 2) Press “Call key” to make a call.
3. Answer a call When your phone rings, just press “Call key” If the phone mode is set to “Any Key Answer”, pressing any key will answer to the coming call. 4. Display The display shows when you turn on the phone Status indicators Time & Date Soft keys PLMN Greeting text [Status indicator] 1) Signal strength indicator - Vertical bars show the strength of network connection. 2) Network indicator - Shows network status.
: In use of call : Cannot make or receive calls : Network forwarding : Roaming (outside of home area) 3) Message indicator - Shows when you receive a new message.
6) Battery level indicator - shows the battery charging level. : Full battery : Low battery 5. Text input Text input is used for creating message, editing phonebook entry, changing idle banner, etc. Input mode z To change the input mode, press Pound key(#) to toggle in numeric mode, upper letter mode and lower letter mode. z To input Symbol, press Star key(*) to change the input mode. z To input common symbol, press 1 key to input several common symbols.
Tip: If you want to input the different language with the current language setting, you have to change “language” setting first. 6. Phone lock You can lock your phone to prohibit others from using the phone. Phone lock is neither SIM card lock nor SIM lock by the operator.
Press and hold “pound key” for a few second, then enter your PW. 7. Auto key lock You can lock your phone to prevent accidental key presses. [Setting auto key lock] Entering: “Left soft key” > “Security Setup” > “Auto Key Lock” [unlock key] Pressing any key will pup up a window. And then press and hold “pound key” for a few second. 8. Language If the language setting is “Automatic”, It will depends on SIM card setting.
MENU MAP 1. Phone Book 1. Browse 2. Create 3. Memory Status 4. Delete all entries 5. My Number 2. Message 1. Write Message 2. Inbox 3. Outbox 4. Drafts 5. Voice Mail 1. Number 2. Delete 3. Connect to Voice Mail 6. Broadcast Message 1. Receive Mode 2. Languages 7. Message Settings 1. Service Center Number 2. Expire Period 3. Massege Type 4. Status Report 5. Alert Period 8. Template 9. Memory Status 3. Call Log 1.
2. Outgoing Call 3. Missed Call 4. Call Duration 4. Settings 1. Phone Settings 1. Clock Settings 2. Language 3. Answer Mode 2. Call Setup 1. Call Divert 2. Call Barring 3. Call Waiting 4. Auto Redial 5. Caller ID 6. Line Select 3. Network Setup 4. Factory Default 5. Security Setup 1. SIM PIN 2. Phone Lock 3. Auto Key Lock 4. Change Password 6. Tone 1. Tone Setup 1. Incoming Call 2. Message Tone 2. Volume 1. Call 2. Ring Tone 3. Keypad Tone 7.
1. Idle Display 1. Clock and Date 2. Idle Text 2. Contrast 3. LCD Backlight 8. Accessories 1. Alarm 2. Calculator 3. Calendar 9.
TECHNICAL INFORMATION This wireless phone meets the government’s requirements for exposure to radio waves. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
While there may be differences between the SAR levels of various phones and at various positions, they all met the governmental requirements for safe exposure. Please note that improvements to this product model could cause differences in the SAR value for later products; in all cases, products are designed to be within the guidelines. Technical Specification Weight Size Wireless Network Frequency Range Backup Battery 59.7g (0.131 lbs) Handset: 104.5 x 45 x 12.8mm(4.11” x 1.77” x 0.
SAFETY INFORMATION IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS INFORMATION BEFORE USING YOUR PHONE. EXPOSURE TO RADIO FREQUENCY (RF) ENERGY Your phone contains a transmitter and a receiver. When it is ON, it receives and also sends out radio frequency (RF) signals. When you communicate with your phone, the system handling your call controls the power level at which your phone transmits.
RF ENERGY INTERFERENCE / COMPATIBILITIES Nearly every electronic device is susceptible to RF energy interference from external sources if inadequately shielded, designed, or otherwise configured for RF energy compatibility. In some circumstances your phone may cause interference. MEDICAL DEVICES Pacemakers Pacemaker manufacturers recommend that a minimum separation of 8 inches (20centimeters) be maintained between the phone and a pacemaker.
chains touches exposed terminals. The conductive material may complete an electrical circuit (short circuit) and become quite hot. Exercise care in handling any charged battery, particularly when placing it inside a pocket, purse or other container with metal objects. Use only original batteries and chargers. Your battery or phone may contain symbols, defined as follows. Your battery or phone may require recycling in accordance with local laws.
