User's Manual

ManualsBrandsI-Rocks Technology ManualsComputers & AccessoriesFoldable Bluetooth Keyboard

Foldable Bluetooth Keyboard User’s Guide

Model No: IRK06B

Thanks for purchasing this Slim Bluetooth Keyboard,

This creative and easy-to-use Bluetooth Keyboard will bring you a whole new wireless life

experience.

Appearance Drawing

Main Features

l Use Broadcom BCM20730 Chipset with wireless Bluetooth 3.0 interface

l Features comfortable, ergonomic design with 14 function keys

l Come with particular power managing software, indicates the power capacity in Microsoft

Windows System automatically

l Use the Bluetooth industry leading software solutions, WIDCOMM BTW (Microsoft

officially designated software) Bluetooth software

l Built-in software solutions with Bluetooth human interface device and comply with the

standard version of the Bluetooth SIG Bluetooth 3.0

l Work with Windows 98, ME, 2000, Server 2003, XP and Vista

l Support SONY PS3

l Frequency band: 2.402 - 2.483GHz unlicensed ISM band

l Receiving sensitivity: -75bm (standard)

l RF output power: up to 4bm as maximum, good for your health with lowest radiates

l 310 mAh Li-Polymer Battery

l Operation distance: 10m

l Operation Temperature: 0-55°C

l Operation Humidity: 10%-85% RH at 25°C

l Storage Temperature: -20~+60°C

l Storage Humidity: 5%-95% RH at 25°C

l Dimension: 148×100×22 mm

Summary of content (8 pages)

PAGE 1
Foldable Bluetooth Keyboard User’s Guide Model No: IRK06B Thanks for purchasing this Slim Bluetooth Keyboard, This creative and easy-to-use Bluetooth Keyboard will bring you a whole new wireless life experience. Appearance Drawing Main Features l l l l l l l l l l l l l l l l l Use Broadcom BCM20730 Chipset with wireless Bluetooth 3.
PAGE 2
Installation Guide Before you install the Bluetooth Keyboard, please make sure that the Bluetooth Dongle has been installed. Software available like Widcomm(Recommended), IVT or the Microsoft built-in software(can not connect to the headset). 1. Using thumb to open the battery compartment of the keyboard and remove it by pulling back 2. Insert two 1.5V, AAA batteries into the compartment. Make sure to comply with the polarity markings. 3. Replace the batteries compartment. 4.
PAGE 3
start to flash white, the keyboard enters pairing mode. Pair Procedure A: Pair on Widcomm (recommended) 1. Double click the Icon again , “My Bluetooth Place” pops up; select “Bluetooth ---Add Bluetooth facility”. Click “Next” button In the Setup Guild window. 2. When the system finds the Keyboard, select it and click “Next”. 3. Input the stochastic Pairing Code, and confirm. 1. Now you can use your keyboard at ease.
PAGE 4
1. Make sure that the Bluetooth Function has been activated. Double click the Bluetooth Icon on the Task Bar or in the Control Panel, open the “Bluetooth Management” window, click “Add”, tick off “facility is ready for searching”, click “Next”. 2. Wait till the keyboard is found, select keyboard and click “Next”. 3. Select” Choose a pass key for me”, click “Next”. 4. Input the pass key and press “Enter”, click “Next”, the system will finish the installation of the new facility automatically. C.
PAGE 5
2. Click the Bluetooth Keyboard founded, click the right button for “Refresh Service”. 3. Select the Bluetooth Keyboard again, click the right button for “Connect-Bluetooth Input Service”, input the stochastic pass key, the system will auto install the HID facility. After that you can use your Bluetooth Keyboard at ease. FAQ: If unable to connect the Bluetooth Keyboard to the computer, or the Keyboard work unconventionally, please try the steps below: 1.
PAGE 6
4. 5. 6. 7. each other before, then under the Standby State, just double click the left button of the keyboard. Make sure that the keyboard is within the effective range---10M. Make sure that there’s no change of the Bluetooth facility. If anything changed, please kindly pair again. If your Bluetooth facility is connected to other Bluetooth products, please kindly confirm that the speed of the Bluetooth facility is enough. Please kindly check the batteries.
PAGE 7
R & TTE Compliance Statement This equipment complies with all the requirements of the DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 9 March 1999 on radio equipment and telecommunication terminal equipment and the mutual recognition of their conformity (R & TTE). Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU.
PAGE 8
(2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with FCC RF radiation exposure limits set forth for general population (uncontrolled exposure). This device must not be collocated or operating in conjunction with any other antenna or transmitter.