User's Manual

User Manual

Brand Name:@MOBILE

Model：UHF-006

Project Name: RFID Module

1. USB Cable plug in the Port1 to support 5V

Voltage

2. Push Key1 read Tag and green LED will light

3. If it read the right data form Tag, the red LED will

light.

FCC Statement

Red LED

Green LED

PAGE 1
User Manual Brand Name:@MOBILE Model：UHF-006 Project Name: RFID Module 1. USB Cable plug in the Port1 to support 5V Voltage 2. Push Key1 read Tag and green LED will light 3. If it read the right data form Tag, the red LED will light.
PAGE 2
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
PAGE 3
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.