User’s Manual IB-8 (2014/May/29)
Copyright This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without the express written consent of the manufacturer. Disclaimer: The manufacturer makes no representations or warranties with respect to the contents hereof and specifically disclaim any implied warranties of merchantability or fitness for any particular purpose.
Power Cord Requirements The power cord you received with this computer conforms to local specifications for use in the country where you purchased it. Power cord use in other countries may require an additional adapter and/or separate power cord. For additional information on local power requirements, contact an authorized dealer, reseller, or service provider. About the AC Adapter The AC adapter will automatically recognize any compatible power supply connected to the computer.
Battery (Lithium-Ion) NOTE: Refer to following hazard statement within the service and operating documentation or on the adjacent label to the battery. 1. English CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY INSTALLED. REPLACE ONLY WITH SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER. DISCARD OF USED BATTERIES IN ACCORDANCE WITH THE MANUFACTURER'S INSTRUCTIONS. 2. French IL Y A DANGER D'EXPLOSION S'IL Y A REMPLACEMENT INCORRECT DE LA BATTERIE.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may case harmful interference to radio communications.
Table of Contents BEFORE USING YOUR COMPUTER ................................................... 1 Product Features ............................................................................. 2 Installation Guidelines ...................................................................... 4 CHAPTER 1 .................................................................................. 6 GETTING STARTED .......................................................................... 6 Unpacking the Product ........
Using the MSR ..................................................................................... 46 Using the GPS ..................................................................................... 47 Using the Fingerrprint Function ...........................................................
Before Using Your Computer Congratulations on your purchase of the product. You will soon be in command of the worlds most lightweight, efficient and secure solution for managing all of your technology and mission critical data. Scale the computer and streamline the costs of day-to-day business operations and multimedia demands. Discover the computer’s unparalleled in-the-field versatility for efficiently and reliably coordinating a myriad of tasks without costing a fortune.
The Instructions Manual Product Features The product is a portable multimedia device empowering highly mobile users with wireless computing capabilities for day-to-day business and wireless applications. Its light weight and supreme portability combined with state-of-the-art multimedia capabilities provide exceptional writing, maneuvering, and on your feet computing. The product’s primary features include: Processor and OS (Operating System): INTEL Bay Trail-M Quad Core N2930 1.
Before Using Your Computer Special Integrated Functions: Multiple special devices, RFID 、 Bar Code 、Fingerprint、Scanner、MSR、Smart Card Reader 、2M / 5M Pixel both sides Camera, can provide useful functions for business and industrial area. Enhanced Protective Equipment﹕ The computer, designed for IP65 ingress protection rating, can provide indoor and outdoor protections of no ingress of dust and water jets against enclosure without harmful effects.
The Instructions Manual Installation Guidelines Read the following before assembling or disassembling the computer: 1. Follow all warnings and instructions marked on the product and within the Manual. 2. Before you begin cleaning the computer, make sure that you have unplugged all power cords and the device is Powered Off. Use a damp cloth for cleaning. Do not use liquids of any kind of aerosol cleaners. 3. Never place the computer on an unstable surface; it may fall, causing serious damage to it. 4.
Before Using Your Computer a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the product. c. If the computer has been exposed to rain or water. d. If the computer does not operate normally when the operating instructions are followed. Adjust only those controls that are specified in the Operating Instructions or improper adjustment may require calibration again from a qualified technician. e. If the computer has been dropped or the housing has been damaged. f.
CHAPTER 1 Getting Started Chapter Preview: Unpacking and setting up the Product Packing list Power Supply The Stylus Pen
CHAPTER 1 - Getting Started Unpacking the Product Before unpacking the product, prepare a suitable workspace for your computer. Make sure the workspace is level, stable and near an electrical outlet. 1. Open the box and remove the contents preserving the integrity of the box as you may need it and all of the packing materials for future shipping. 2. Inspect the contents for damage. If you find any irregularities or anything appears to be missing, contact your Dealer immediately.
The Instructions Manual Power Supply The computer can be powered using either the built in battery or the AC Power Adapter plugged into any grounded AC power outlet. Using the Battery The primary source of power for the computer is a Lithium-Ion battery pack. The battery pack will first need to be installed on the backside of the computer. After following the battery installation instructions below, plug the AC adapter into any electrical outlet and the computer will begin recharging immediately.
CHAPTER 1 - Getting Started To install and remove the battery pack: Using the Power Switch to power down the computer. Battery Lock Battery Switch Installing the Battery Turn the lock knob to Unlock position and gently put the batteries into the battery bay. Then, turn the lock knob to Lock position. Removing/Replacing the Battery Turn the lock knob to Unlock position and Turn the switch gently take out the batteries. Carefully lift the batteries out.
The Instructions Manual Caring for the Battery Do not heat, tamper or place the battery in water or near a fire. Do not subject the battery to unusual forces such as hitting it, stepping on it or dropping it. Do not attempt to open or service the battery pack. Only replace the battery with the same model or one of compatible design. Using the AC Adapter When connecting the computer to external power: 1. Plug the DC power cord into the DC jack on the computer. 2.
CHAPTER 2 System Overview This chapter contains six illustrations, highlighting each external component and its respective functions.
The Instructions Manual Front View of the Computer RFID Microphone 2M CCD Power button Barcode Trigger 8” TFT Panel Hot key1 Hot key2 Hot key3 Hot key4 Status LED Fingerprint Rubber Corner 8” inch TFT (1024x768) LCD Display with Touch Screen Control Panel: Data can be entered the computer module using the stylus pen or a soft/USB/wireless keyboard. A soft keyboard can be located by tapping the keyboard icon in the bottom right on the desktop.
CHAPTER 2 – System Overview RFID Device : The HF RFID Reader device is a communication device which includes complete circuits to achieve reading from and writing to the RFID tag. It conforms to various industry standard RF protocols of NFC. Microphone: Effortless input of monaural sound recording. 2 M CMOS Camera : The build-in front 2M pixels CMOS Camera supports video applications for all media software. The user can make a video communication in the network.
The Instructions Manual Fingerprint: The device is virtually immune from attacking of fake finger. It can self-calibrate each sensor’s output signal for different skin conditions like sweaty, scarred and dry, to be an excellent image quality. Rubber Corner The Rubber Corner provides a protection of falling down and related damages.
CHAPTER 2 – System Overview Right Side View of the Computer DC In USB RS-232 DC-in Jack: Plug the DC (Direct Current) end of the AC Adapter into this jack for external power and battery recharging. Before plugging in the power cord, you must first verify that the external power voltage is appropriate for your geographical area. USB 2.0 Ports: Permits hot plugging of USB peripheral devices to the computer. The USB ports support most USB mouse and keyboard devices.
The Instructions Manual Left Side View of the Computer Network Mini Smart card Reader Jack(RJ45) Micro SD HDMI Strap Hook Network Jack (RJ45): Interfaces with an Ethernet 10/100/1000 Mbps Base-T network connection. HDMI : The High Definition Pictures can be transmitted to display from computer with the HDMI cable. Mini Smart Card Reader: (optional) This device can read a various data include ATM card for business.
CHAPTER 2 – System Overview Bottom View of the Computer Docking Port Docking Port ﹕ The extended multi-function included: the battery charger port, the USB ports supporting most USB mouse and keyboard devices, RJ-45 Internet port, RS-232 port, DC-In Jack, Microphone and Headphone.
The Instructions Manual Top View of the Computer Barcode Scanner M.S.R Barcode Scanner: (optional) Omni directional bar code reading. Scan rate of up to 200 scans per second in linear emulation mode or 56 scans per second in Omni directional mode. Fully compatible with Intermec’s family of decoded engines. MSR: (optional) The reader delivers superior reading performance with the ability to encrypt sensitive card data.
CHAPTER 2 – System Overview Rear View of the Computer MMCX Connector Stylus Pen Rear CMOS Camera Battery Switch Battery Lock Speaker Battery Pack Battery Indicator Battery Indicator Switch Stylus Pen(optional): A stylus pen is used to activate the touch screen display and functions in the same way as an external mouse. The stylus pen is partially visible from the left side of the computer and can be located by pulling it from its secure housing.
The Instructions Manual Rear CMOS Camera: (optional) The build-in 5M pixels CMOS camera module supports auto reverse function. Images can be captured and disseminated instantaneously. Internal Speakers: The computer’s built-in a single speaker support audio applications for all media software. Volume and equalizer control can be adjusted via the OS or additional multimedia application software. Sound will mute when headphones are detected. Battery Pack: A n Internal battery one cell DC 3.
CHAPTER 3 Protecting & Maintaining Chapter Preview: Caring for your Computer Configuring DRAM and SIM Card Adjusting the Resolutions for the Computer’s Display and an External Display
The Instructions Manual Caring for Your Computer To guarantee a long life for the computer and to ensure it functions optimally, pay particular attention to the following recommended maintenance guidelines. Routine Care Follow these guidelines to keep the computer working properly: Do not attempt to disassemble or modify the computer in any way. Do not place anything on top of the device or its LCD display to prevent damage to the screen.
CHAPTER 3 – Protecting & Maintaining Caring for the AC Adapter Be sure to only use the AC adapter that comes provided with this product or a compatible option from the manufacturer. Other adapters may cause damage to the computer and will not be covered under the warranty. Grasp the adapter plug and not the cord, when unplugging the adapter from an electrical outlet. If the power cord becomes damaged (exposed or frayed, etc.), replace with a new AC adapter.
The Instructions Manual Configuring DRAM and SIM Card Configuring DRAM 1. Remove these 5 screws on the Memory cover 2. Remove the 1 screw and the Metal Cover 3. Dismount the back stand. Configuring SIM Card 24 1. Remove The Battery Pack 2. Please insert the SIM Card to the slot ( Red Frame).
CHAPTER 3 – Protecting & Maintaining Adjusting the Video Resolution Changing the Video Resolution of the Computer 1. Click the right button of the mouse on the desktop and select “ Screen Resolution “ from the menu. 2. Select the Settings tab. Select the Advanced option. 3. Select the Adapter option. Select the List All Modes. 3. Select the Adapter option. Select the List All Modes. 4. Confirm the desired display mode (ex. 1024X768) True Color (32 bits)/ 60Hertz).
CHAPTER 4 Specifications & Software Chapter Preview: Specifications and Standard Features Software
CHAPTER 4 – Specifications & Software Specifications and Standard Features Processor INTEL Bay Trail-M Quad Core N2930 1.86 GHZ Operating System ® Microsoft Window 7 / Window 8 / Window 8.
The Instructions Manual Communication 10/100/1000 Mbps Base-T Ethernet LAN CMOS Camera 2M/5M Pixels CMOS Camera Module Support Auto Reverse Function RFID 13.56 MHz Mifare DES Fire Reader / ISO 15693 Reader MSR Encrypted MSR Bar Code Scanner Support 1D/2D bar code Smart Card Reader Operates ISO 7816 Fingerprint Sensor Scan Area: 9.6 mm x 0.
CHAPTER 4 – Specifications & Software Battery Internal one 1-cell 920mAh External one 6-cell 6200mAh Removable Lithium-Ion Battery Pack. Short circuit, over-charge, over-discharge, over-current and abuses protected. Power Supply External AC Adapter (175g / AC Input 100~240V, 50/60Hz, 3 Pin Inlet / DC Output 16V, 4.0 A, DIM:107.7mm x 45.9 mm x 30 mm ) includes Power Cord. Included Accessories Stylus pen(Option), Hand strip, power cord, adapter and belt. Interface 2x USB 2.
The Instructions Manual Environmental Specifications Operating temperature : -10° to 40°C (14° to 104°F) Storage temperature : -20° to 75°C (-4° to 167°F) Certification of System 30 FCC / CE / EN 60950-1 IP65
CHAPTER 4 – Specifications & Software Software Using The Smart Panel to Calibrate The Screen Path: Start / Control Panel / Tablet PC Setting / Calibrate 31
The Instructions Manual Using The Front Panel Hot Key Utility Please refer to the following descriptions for each of all 5 hot keys. Key T : A dedicated button to enable / disable Barcode function.
CHAPTER 4 – Specifications & Software Key 1: The defaulted key function is to launch “Windows Task Manager” application to manage your applications. The user is able to redefine the key function. Key 2: The defaulted key function is to launch “Cap Sound” application to enable / disable audio recorder. The user is able to redefine the key function.
The Instructions Manual Key 3: The defaulted key function is to launch “Windows Media Player” application to play music or video. The user is able to redefine the key function. Key 4: Press Key 4 to launch submenu function. The “submenu bar” as the following will be displayed on the desktop.
CHAPTER 4 – Specifications & Software The statuses of the communication capacities will be displayed on the submenu bar. Key 1, Key 2, Key 3 and Key 4 are endowed with different functions when the “submenu bar” was triggered. Please refer to the following descriptions. Click WiFi icon or press Key 1 to enable / disable the wireless function. Switch Click Bluetooth icon or press Key 2 to enable / disable the bluetooth function.
The Instructions Manual Click 3G i con or press Key 3 to enable / disable the 3G function. Switch Click GPS i con or press Key 4 to enable / disable the GPS function. Switch Click OK icon or wait for 3 seconds to Exit. 1. 36 Define the Functions for Hot Key Utility Right-click the “Hot Key” icon in the Windows system tray, then select “Define” to launch the “User Defined Function” application.
CHAPTER 4 – Specifications & Software 2. Type the correct path of the APP or browse the Folder icon to select your APP Click here select APP Make sure the defined APP path is correct. Your APP path Click “Save” to confirm your selections.
The Instructions Manual Using The Bluetooth Utility: BlueSoleil allows the computer to wirelessly access a variety of Bluetooth enabled digital devices, such as cameras, mobile phones, headsets, printers, and GPS receivers. Users can also create networks and exchange data with other Bluetooth enabled computers or PDAs. First : Turn on your Bluetooth device 1. To launch the Blue Tooth icon (Red circle) from the desktop. 2. 38 Select “Show Bluetooth Devices”.
CHAPTER 4 – Specifications & Software 3. Select “add device“ (Red Circle). Some blue tooth devices were found and listed out. 4. Select “Blue tooth Keyboard“ or other devices. 5. Type the number or password for configuration. 6. Selected Blue tooth device has been successfully configured with the computer.
The Instructions Manual Making a 3.5G Connection and Disconnection Please inserted SIM Card to SIM card slot before boot computer Connection Select to make a connection. Disconnection Select to terminate the connection..
CHAPTER 4 – Specifications & Software Using the CMOS Camera 1. Select “ AMCAP” ICON 2. Select “device“ and “USB Video device“. The Front & Rear camera will be change.
The Instructions Manual Using the RFID 1. Select “Holy Stone” ICON 2. Type “3” for the Select COM Port. 3. Put your RFID card close to the RFID Sensor. The message “TAG = MIFARE 1K” will be displayed, if the computer accepts the RFID card.
CHAPTER 4 – Specifications & Software Using the Mini Smart Card 1. Select the “Mini Smart” icon. 2. Inserted the Mini Smart Card to the SCR Slot and Pressing “ RUN “ The detail information will be displayed on the Result dialog box.
The Instructions Manual Using the Bar code Scanner 1. Select the Scanner icon. 2.
CHAPTER 4 – Specifications & Software 3. To Pressing the 【T】Function key.
The Instructions Manual Using the MSR 1. Select the “NotePad” icon. 2. Insert the Cash Card or ATM Card into the MSR slot. 3. The information will be displayed on the screen.
CHAPTER 4 – Specifications & Software Using The GPS 1. To Confirmed the GPS COM port number at the device manager. 2. Select the “U-Center ” ICON.
The Instructions Manual 3. Select correct COM Port. 4. Select the Baud Rate. 5. Receive the Satellite Channel.
CHAPTER 4 – Specifications & Software Using the Fingerprint Function Click the delta icon in the Windows system tray, then Click Fingerprint icon (BioExcess) 49
The Instructions Manual Select “ Initial Wizard “ bar Click 【Next】 50
CHAPTER 4 – Specifications & Software To swipe your finger on the fingerprint device for the enrollment. Repeat 2 times.
The Instructions Manual Warning FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
CHAPTER 4 – Specifications & Software comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.
The Instructions Manual 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a sub-stantial margin of safety to give additional protection for the public and to account for any variations in measurements. Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body, including the antenna.