User's Guide

DOWNLOAD APPS
Prestan
LIST OF COMPONENTS
1)
User Guide
①
③
④
Color ID Stickers
Lung bag with sensor holder
Ferrite Core (1 Turned cable)
CPR Add-on kit (for TERi
™)
(Requires two AA batteries)
9.0V 10 0mA
WARRANTY
Product Name 1 Manufacturer o󸽟ers a LIMITED WARRANTY against any defects in workmanship
or materials under normal use for one (1) year from the date of purchase. Any
component of the CPR Rate Monitor Plus which proves defective within the
warranty period will be repaired, free of charge. The customer is responsible
for shipping and handling fees to the place which manufacturer designates.
2 Customer must provide proof of the date of purchase, place of purchase and the
purchase price in order to obtain service under this limited warranty. No agent,
representative, dealer of Manufacturer has the authority to alter the obligations
or limitations of this limited warranty.
3 CUSTOMER’S SOLE AND EXCLUSIVE REMEDY AGAINST MANUFACTURE SHALL
BE FOR THE REPAIR OR REPLACEMENT OF DEFECTIVE GOODS AS PROVIDED
HEREIN. Repair of any component of any CPR Rate Monitor Plus does not
extend this limited warranty or begin a new limited warranty period.
4 Manufacturer reserves the right to refuse warranty service or replacement
when product failure is due to abrasion, abnormal use, misuse, mishandling,
misapplication, accident, neglect, improper installation, modi󸽠cation, use
of unauthorized parts or attachments, adjustments or repair performed by
anyone other than manufacturer or its authorized agent, or any causes other
than defective workmanship or material. This limited warranty does not cover
failure or damage resulting from unsuitable operating environments or storing
environments or natural disasters or acts of God. MANUFACTURER SHALL
NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT
OF THE USE OF THE CPR Rate Monitor Plus OR THE BREACH OF THIS OR ANY
OTHER EXPRESSED OR IMPLIED WARRANTY.
Model
PRODUCT INFORMATION
Copyright © 2020. I.M.LAB Inc.
USER GUIDE
CPR add-on Kit (for TERi
™
)
AK 2G-TE
I.M. LAB Inc.
I.M. LAB Inc. / 7F, 165, Yeoksam-ro, Gangnam, Seoul, Korea
CE. / FCC ID: 2ASY3AK1G-TE
Developer
Manufacturer Info.
Certi󸽠cation
②
CPR Add-on Kit for TERi™
GETGET
CPR add-on kit
CPR add-on kit
Instructor
CPR add-on kit
Student
2)
3)
Copyright © 2019 HC190001INM12
16 Simulaids drive
PO Box 1289
Saugerties, NY 12477
[e-mail]
1.800.431.4310
NascoHealthcare.com
ADDRESS
EMAIL
PHONE
ONLINE
HEALTHCARE
⚠ CAUTION
- Keep the used batteries out of reach of children and dispose separately.
- If you do not use the device for a long period of time remove and store the batteries.
- Do not use a new battery and an old battery together.
FCC Part 15.19
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Part 15.21
Any changes or modi󸽠cations (including the antennas)
to this device that are not expressly approved by the
manufacturer may void the user’s authority to operate
the equipment.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna
must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o󸽟 and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit di󸽟erent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Part 15 B
SDoC information