RG-120-EN Manual RG-120T V-1.01 DC doorbell RG-120R RG-120T Features Power supply: RX 4.5V (AA1.5V x 3),TX 3V(AAA1.5 x 2) Transmission range:200m（inroom 150m）. Frequency: 433.92MHz ±150KHz Tolerance Alarm mode：Music 48 Matching method: learning coding Applications: Villas, hotels, apartments, office buildings, elderly and child care Dongguan i-chime electronic co.
RG-120-EN Manual V-1.01 Important information Take the time to read this user manual before using this control switch module Recycling your old device Your device is designed and manufactured with high quality materials and components that can be recycled and reused. If a product or its packaging has this symbol with a crossed-out wheeled container, this means that it is under the CE 2002/96 directive.
RG-120-EN Manual V-1.01 1.RG-001 Function diagram Dongguan i-chime electronic co.
RG-120-EN Manual V-1.01 2 .Installation and configuration 2.1． first time to use Open the RG-120R battery box, install AA1.5V×3, and then open the RG-120T remote control battery box (rear cover) to install AAA1.5Vx2 batteries. 1. .There is a notch on the top of the push button. Use the included screwdriver to pry up slightly. Dongguan i-chime electronic co.
RG-120-EN Manual V-1.01 3. The transparent cover can be removed and a business card can be inserted to let visitors know that this is the doorbell of your home ,Fully show your personality 4. Dongguan i-chime electronic co.
RG-120-EN Manual V-1.01 The transmitter button can be installed with double-sided stickers or screws (included). The transmitter button adopts an awning design, which is rainproof Note: Please install the transmitter button one meter above the ground; Don’t install the transmitter button directly on the iron door, but on the wall next to it, so as not to affect the distance of the remote control. Don't install the transmitter button next to other electrical appliances. Dongguan i-chime electronic co.
RG-120-EN Manual V-1.01 2.2 Reconfiguration of RG-120T and RG-120R。 Important note: The new factory RG-120T/R wireless doorbell transceiver has been configured, so there is no need to re-configure. You can skip this step. 2.2.1 Reconfiguration of RG-120T/R 2.2.1.
RG-120-EN Manual V-1.01 2.2.2 Reconfiguration of RG-120，Add second and third receivers After installing the battery, press and hold the CODE button of the second RG-120R (5 seconds), the receiver LED indicator flashes (once per second), the receiver enters the waiting configuration state, then quickly press RG-120 T button,to configure with the receiver. When the RG-120R LED indicator is off, the second receiver configuration is complete. Repeat this step to complete the third receiver configuration. 2.
RG-120-EN Manual V-1.01 second transmitter configuration is completed . Repeat this step to complete the third transmitter button Dongguan i-chime electronic co.
RG-120-EN Manual 2.2.4 V-1.01 Reconfiguration of RG-120T/R，Change music Open the back cover (battery box) of the RG-001T, and change the music every time you press the button on the PCB, There are 48 types of music.( When the song selection button is pressed for the first time, the original music will be played, and when it is pressed again, it will switch to the next song.） 2.3.
RG-120-EN Manual V-1.01 3 . Application Villas, hotels, apartments Dongguan i-chime electronic co.
RG-120-EN Manual V-1.01 office buildings Dongguan i-chime electronic co.
RG-120-EN Manual V-1.01 4. Technical Details Manufacturer NARUIGER Part Number RG-120T & RG-120R Item Weighjt RG-120R:64g, RG-120T:46g Dimensions Item moder number Frequency Power Supply Matching Method Sound source MODE Working temperature RX:1000*80*27mm, TX:90*30*223mm RG-120T & RG-120R 433.92MHz ±150KHz Tolerance RX:4.5V(AAA 1.5V*3 ),TX: 3V(AA 1.
RG-120-EN Manual V-1.01 FCC COMPLIANCE STATEMENT: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
