User's Manual

Wireless Phone Charger User Manual
Descriptions Instructions Cautions
Notes
Certificate Mark: Denotes that the product is certificated by
WPC Association.
No Smart Keys: Do not place a smart key on the product while
charging.
No Coins: Do not place a coin on the product while charging..
In case of Trouble
Only products with WPC (qi) standard certification can be used.
1. This product activates at the start engine state above "ACC".
2. Check if the product's LED light (BLUE) blinks twice.
3. Place the phone on the center of the charging pad. Charging efficiency
may decline as the phone is far from the center.
4. While charging, LED light turns BLUE.
5. When the phone is charged, LED light may turn from BLUE to Green.
● In the event of inefficiency of charging or LED light (BLUE) continues to
blink, please refer to "In Case of Trouble" section and pick up the phone
and place it again on the center to check if it is charging.
The product does not charge
- Check if the phone fulfills Qi standard.
(This product only supports the phones with WPC standard certificate)
- Adjust the phone on the center of the product.
- Look for the foreign matters(coins, keys, magnetic cards, can lid) on the
charger, remove them and charge again.
LED light continues to blink
- Check if the phone is stable on the charging area.
- Look for the foreign matters between the phone and the product.
- Remove the phone from the charger and put it back on.
LED light does not turn on
- Check if the automobile's start engine is above "ACC" state.
The cluster says "There is no smart key in the area"
- Remove the smart key from the charging area.
• Do not place smart keys, coins, or magnetic cards on the charger.
• Do not place wet tissues, water, or any liquid matters
on the charger.
• Do not disassemble or renovate the product.
• In case of the phone removed from the charging area on driving,
put it back on after stopping the car.
• Do not place any heavy or unstable matters on the charger.
• Place the machineries that may be effected by magnetic field
away from the product.
• Do not use the charger in case of damage or malfunction.
• The phone larger than the charging area may not be able to
charge.
• In case of trouble or malfunction, please contact
Hyundai Automobile or Hyundai Mobis support center.
• Please refer to below 9 images before using the product.
• The phone case might interrupt the charging.
• Some short sized phones might not charge when it is placed
at the edge of the charger.
• The Charger cover not provided by phone productions might
interrupt the charging.