Features of your vehicle FM reception AM reception FM radio station ቍቋᆲ ቍቋᆲ JBM001 How vehicle audio works AM and FM radio signals are broadcast from transmitter towers located around your city. They are intercepted by the radio antenna on your vehicle. This signal is then received by the radio and sent to your vehicle speakers. When a strong radio signal has reached your vehicle, the precise engineering of your audio system ensures the best possible quality reproduction.
Features of your vehicle Using a cellular phone or a two-way radio When a cellular phone is used inside the vehicle, noise may be produced from the audio system. This does not mean that something is wrong with the audio equipment. In such a case, use the cellular phone at a place as far as possible from the audio equipment. ቍቋᆲ CAUTION JBM004 JBM005 • Fading - As your vehicle moves away from the radio station, the signal will weaken and sound will begin to fade.
Features of your vehicle WARNING • Do not stare at the screen while driving. Staring at the screen for prolonged periods of time could lead to traffic accidents. • Do not disassemble, assemble, or modify the audio system. Such acts could result in accidents, fire, or electric shock. • Using the phone while driving may lead to a lack of attention of traffic conditions and increase the likelihood of accidents. Use the phone feature after parking the vehicle.
Features of your vehicle (Continued) • Turn on the car ignition before using this device. Do not operate the audio system for long periods of time with the ignition turned off as such operations may lead to battery discharge. • Do not subject the device to severe shock or impact. Direct pressure onto the front side of the monitor may cause damage to the LCD or touch screen. • When cleaning the device, make sure to turn off the device and use a dry and smooth cloth.
Features of your vehicle ■ CD Player (for RDS model) : AM904DMEE, AM914DMEE ❋No logo will be shown if the Bluetooth® Wireless Technology feature is not supported.
Features of your vehicle SYSTEM CONTROLLERS AND FUNCTIONS ❈ Display and settings may differ depending on the selected audio. Audio Head Unit (for RDS, Bluetooth® Wireless Technology equipped model) 1. (EJECT) • Ejects the disc. 2. RADIO • Converts to Radio(FM/AM) mode. • Each time the key is pressed,the mode is changed in order of FM1 ➟ FM2 ➟ FMA ➟ AM ➟ AMA. 3. MEDIA • Start Media mode • Each time the key is pressed, the mode is changed in order of CD, USB(iPod) AUX, My Music, BT Audio. 4.
Features of your vehicle 11. SETUP Converts to Setup mode. 12. TUNE knob • Radio mode : turn to change broadcast frequencies. • Media (CD/USB/iPod/My Music) modes : turn to search tracks/channels/files. 13. DISC-IN LED 8. • Turns the monitor display on/off. • LED that indicates whether a disc is inserted. 9. CLOCK Displays the time/date/day. 14. RESET • Forced system termination and system restart. 10.
Features of your vehicle Audio Head Unit 15. FM • Changes to FM mode. • Each time the key is pressed, the mode changed in order of FM1 ➟ FM2 ➟ FMA. 16. AM • Changes to AM mode. • Each time the key is pressed, the mode changed in order of AM ➟ AMA. 4 8 17. MEDIA • Start Media mode • Each time the key is pressed, the mode is changed in order of CD, USB(iPod), AUX, My Music.
Features of your vehicle ■ CD Player : AM900DMMG, AM910DMMG, AM911DMMG, AM901DMGG, AM910DMEE, AM911DMEE, AM910DMGL, AM900DMMN, AM910DMMN, AM912DMEE, AM911DMGL ❋No logo will be shown if the Bluetooth® Wireless Technology feature is not supported.
Features of your vehicle SYSTEM CONTROLLERS AND FUNCTIONS ❈ Display and settings may differ depending on the selected audio. Audio Head Unit (for Bluetooth® Wireless Technology equipped model) 1. (EJECT) • Ejects the disc. 2. RADIO • Converts to Radio(FM/AM) mode. • Each time the key is pressed,the mode is changed in order of FM1➟FM2➟AM. 3. MEDIA • Start Media mode • Each time the key is pressed, the mode is changed in order of CD, USB(iPod) AUX, My Music, BT Audio. 4.
Features of your vehicle 11. SETUP Converts to Setup mode. Audio Head Unit 12. TUNE knob • Radio mode : turn to change broadcast frequencies. • Media (CD/USB/iPod/My Music) modes : turn to search tracks/channels/files. 13. DISC-IN LED 8. DISP • Turns the monitor display on/off. 9. CLOCK Displays the time/date/day. 10. SCAN • Radio Mode : previews all receivable broadcasts for 5 seconds each • Media (CD/USB/iPod/My Music) modes : previews each song (file) for 10 seconds each.
Features of your vehicle Steering remote controller 1. VOLUME • Used to control volume. 2. MUTE • Mutes audio volume. 3. SEEK • When pressed shortly (under 0.8 seconds) - Radio mode : searches broadcast frequencies saved to presets. - Media(CD/USB/iPod/My Music/BT Audio) modes : changes the track, file or chapter. 4 12 • When pressed and held (over 0.
Features of your vehicle RADIO MODE (for RDS model) -AM904DMEE, AM914DMEE Basic Mode Screen 1. Mode Display Displays currently operating mode 2. Frequency Displays the current frequency 3. Preset Displays current preset number [1] ~ [6] Switching to Radio Mode Pressing the RADIO key will change the operating mode in order of FM1 ➟FM2➟FMA➟AM➟AMA. Pressing the FM or AM key to change the operating mode in order of FM1➟FM2➟FMA and AM➟ AMA. 4. Preset Display Displays saved presets 5.
Features of your vehicle Searching Radio Frequencies Using Seek ✽ NOTICE Using Radio Mode Selecting /Saving Presets SEEK Press the TRACK key to play the previous/next frequency. Press the 1 ~ 6 the desired preset. buttons to play While listening to a frequency you want to save as a preset, press and hold one of the [1] ~ [6] preset buttons (over 0.8 seconds) to save the current frequency to the selected preset. Using TUNE Auto Store Turn the TUNE knob to select the desired frequency.
Features of your vehicle RDS Menu Scan Press the button to set the AF (Alternative Frequency), Region and News features. Press and hold the TA/SCAN key (over 0.8 seconds) to preview frequencies with superior reception for 5 seconds each. ✽ NOTICE Once scan is complete, the previous frequency will be restored. While Scan is operating, pressing and holding the TA/SCAN key (over 0.8 seconds) will cancel the scan operation. ✽ NOTICE The RDS Menu is not supported within AM or AMA mode.
Features of your vehicle Program Type TA (Traffic Announcement) PTY Press the FOLDER key to search for the desired Program type. Press the TA/SCAN key to turn the TA (Traffic Announcement) feature On/Off. Turn the TUNE knob left/right to search for the desired program type. Once you find the desired program type, press the TUNE knob.
Features of your vehicle RADIO MODE - AM900DMMG, AM910DMMG, AM911DMMG, AM901DMGG, AM910DMEE, AM911DMEE, AM910DMGL, AM900DMMN, AM910DMMN, AM912DMEE, AM911DMGL Basic Mode Screen 1. Mode Display Displays currently operating mode 2. Frequency Displays the current frequency 3. Preset Displays current preset number [1] ~ [6] 4.
Features of your vehicle Searching Radio Frequencies Using Seek SEEK Press the TRACK key to play the previous/next frequency. Auto Store Using Radio Mode Selecting /Saving Presets Press the Preset button to display the broadcast information for the frequency saved to each button. Using TUNE Turn the TUNE knob to select the desired frequency. • FM : Increases/decreased by 100kHz • AM : Increases/decreased by 9kHz Press the A.store button to automatically save receivable frequencies to Preset buttons.
Features of your vehicle ✽ NOTICE - USING THE DISCS • This device has been manufactured to be compatible with software bearing the following logo marks. • Do not clean discs with chemical solutions, such as record sprays, antistatic sprays, antistatic liquids, benzene, or thinners. • After using a disc, put the disc back in its original case to prevent disc scratches. • Hold discs by their edges or within the center hole to prevent damages to disc surfaces.
Features of your vehicle MP3 File Information • Support for Compressed Files 1. Supported Bitrates (Kbps) File System Audio Compression ISO 9660 Level 1 ISO 9660 Level 2 Romeo / Juliet (128 characters) MPEG1 Audio Layer3 MPEG2 Audio Layer3 MPEG2.5 Audio Layer3 Windows Media Audio Ver 7.X & 8.X ❈ File formats that do not comply with the above formats may not be properly recognized or play without properly displaying file names or other information.
Features of your vehicle 4. Text Display (Based on Unicode) - File name: Maximum 64 English characters - Folder name: Max 32 English characters ❈ Using the scroll feature allows you to see the entire name of files with names that are too long to be displayed at once. • Compatibility by Disc Type 1. Playing MIXED CDs: First plays the audio CD, then plays the compressed file(s). 2. Playing EXTRA CDs: First plays the audio CD, then plays the compressed file(s). 3.
Features of your vehicle MEDIA MODE MEDIA MODE ✽ NOTICE - AM910DMMG, AM911DMMG, AM912DMEE, AM910DMMN, AM914DMEE, AM911DMGL - AM900DMMG, AM901DMMG, AM910DMEE, AM911DMEE, AM910DMGL, AM900DMMN, AM904DMEE • The media mode pop up screen can be displayed only when there are two or more media modes turned on.
Features of your vehicle 1. Mode Displays currently operating mode AUDIO CD MODE Basic Mode Screen 2. Operation State From Repeat/Random(Shuffle)/ Scan, displays the currently operating function 3. Track Info Displays information about the current track 7. Random(Shuffle) Turns the Random(Shuffle) feature on/off 8. Repeat Turns the Repeat feature on/off 9. List Moves to the list screen 4. Play/Pause Changes the play/pause state 5. Play Time Displays the current play time 6.
Features of your vehicle ✽ NOTICE Using Audio CD Mode Playing/Pausing CD Tracks Once an audio CD is inserted, the mode will automatically start and begin playing. • Only genuine audio CDs are supported. Other discs may result in recognition failure (e.g. copy CD-R, CDs with labels) • The artist and title information are displayed on the screen if track information is included within the audio CD. Changing Tracks SEEK Press the TRACK key to move to the previous or next track.
Features of your vehicle Audio CD Mode Menu Within this mode, you will have access to the Info, Random(Shuffle), Repeat and List features. Info List Press the ( Info )button to display details about the current disc. Press the ( List )button to display the track list screen. Random(Shuffle) Press the ( Shuffle )button to play tracks in random(Shuffle) order. Press the button again to turn the Random(Shuffle) feature off. • Random(Shuffle): Plays all tracks in random(Shuffle) order.
Features of your vehicle 1. Mode Displays currently operating mode. MP3 CD MODE Basic Mode Screen 2. Operation State From Repeat/Random(Shuffle)/ Scan, displays the currently operating function 3. File Index Displays the current file number 4. File Info Displays information about the current file 5. Play/Pause Changes the play/pause state 6. Play Time Displays the current play time 7. Info Shows detailed information about the current file 4 26 8.
Features of your vehicle ✽ NOTICE Using MP3 CD Mode Playing/Pausing MP3 Files Once an MP3 disc is inserted the mode will automatically start and being playing. • If there are numerous files and folders within the disc, reading time could take more than 10 seconds and the list may not be displayed or song searches may not operate. Once loading is complete, try again. Changing Files SEEK Press the TRACK key to move to the previous or next file.
Features of your vehicle Searching Folders PTY Press the FOLDER ( FOLDER key to select and search folders. ) Once the desired folder is displayed, press the TUNE knob to select. MP3 CD Mode Menu Within this mode, you will have access to the Info, Random(Shuffle), Repeat, Copy and List features. ✽ NOTICE • When the ‘Folder File’ option is set as the default display within Display setup, the album/artist/file information are displayed as detailed file information.
Features of your vehicle Repeat List Press the ( Repeat )button to repeat the current file or folder. Press the ( List )button to display the file list screen. Each time the button is pressed, the feature changes in order of Repeat ➟Repeat Folder➟Off. • Repeat: Repeats the current file. • Repeat Folder: Repeats all files within the current Folder. Copying Files Press the ( Copy )button to copy the current file into My Music. ✽ NOTICE Turn the TUNE knob left/right to search for files.
Features of your vehicle ✽ NOTICE - USING THE USB DEVICE • Connect the USB device after turning on the engine. The USB device may become damaged if it is already connected when the ignition is turned on.The USB device may not operate properly if the car ignition is turned on or off with the USB device connected. • Heed caution to static electricity when connecting/disconnecting USB devices. • Encoded MP3 Players will not be recognized when connected as an external device.
Features of your vehicle (Continued) • The device will not support files locked by DRM (Digital Rights Management.) • USB memory sticks used by connecting an Adaptor (SD Type or CF Type) may not be properly recognized. • The device may not operate properly when using USB HDDs or USBs subject to connection failures caused by vehicle vibrations. (e.g. istick type) • Avoid use of USB memory products that can also be used as key chains or mobile phone accessories.
Features of your vehicle 1. Mode Displays currently operating mode USB MODE Basic Mode Screen 2. Operation State From Repeat/Random(Shuffle)/ Scan, displays the currently operating function 3. File Index Displays the current file number 4. File Info Displays information about the current file 5. Play/Pause Changes the play/pause state 6. Play Time Displays the current play time 7. Info Displays detailed information for the current file 4 32 8.
Features of your vehicle ✽ NOTICE Using USB Mode Playing/Pausing USB Files Once a USB is connected, the mode will automatically start and begin playing a USB file. • Loading may require additional time if there are many files and folders within the USB and result in faulty list display or file searching. Normal operations will resume once loading is complete. • The device may not support normal operation when using a USB memory type besides (Metal Cover Type) USB Memory.
Features of your vehicle Searching Folders PTY Press the FOLDER ( FOLDER to select and search folders. )key USB Mode Menu Within this mode, you will have access to the Info, Random(Shuffle), Repeat, Copy and List features. Once the desired folder is displayed, press the TUNE knob to select. The first file within the selected folder will begin playing. Random(Shuffle) Info Press the ( Info )button to display details about the current file.
Features of your vehicle Repeat List Press the ( Repeat )button to repeat the current file or folder. Each time the button is pressed, the feature changes in order of Repeat➟ Repeat Folder ➟ Off. • Repeat (Icon) : Repeats the current file. • Repeat Folder (Icon) : Repeats all files within the current folder. Press the ( List )button to display the file list screen. Copying Files Press the ( Copy )button to copy the current file into My Music.
Features of your vehicle ✽ NOTICE - USING THE iPod® DEVICE • iPod® is a registered trademark of Apple Inc. • In order to use the iPod while operating the keys, you must use a dedicated iPod cable. (the cable that is supplied when purchasing iPod/iPhone products) • If the iPod is connected to the vehicle while it is playing, a high pitch sound could occur for approximately 1-2 seconds immediately after connecting. If possible, connect the iPod to the vehicle with the iPod stopped/paused.
Features of your vehicle 1. Mode Displays currently operating mode iPod MODE Basic Mode Screen 2. Operation State From Repeat/Random(Shuffle), displays the currently operating function 8. Repeat Turns the Repeat feature on/off 9. List Moves to the list screen 3. Song Index Displays the current song/total number of songs 4. Song Info Displays information about the current song 5. Play/Pause Changes the play/pause state 6. Play Time Displays the current play time 7.
Features of your vehicle Using iPod Mode ✽ NOTICE Playing/Pausing iPod Songs • iPods with unsupported communication protocols may not properly operate in the audio system. Once an iPod is connected, the mode will automatically start and begin playing an iPod song. Searching Categories Turn the TUNE knob left/right to search for the desired category. Changing Songs SEEK Press the TRACK key to move to the previous or next song.
Features of your vehicle ✽ NOTICE There are eight categories that can be searched, including Playlists, Artists, Albums, Genres, Songs, Composers, Audiobooks and Podcasts. Category Menu Within the iPod Category menu, you will have access to the , Home, and features. ✽ NOTICE • If the search mode is accessed while playing a song, the most recently searched category is displayed. • Search steps upon initial connection may differ depending on the type of iPod device. 1.
Features of your vehicle iPod Mode Menu Within this mode, you will have access to the Random(Shuffle), Repeat and List features. Random(Shuffle) List Press the ( Shuffle )button to play songs in random(Shuffle) order. Each time the button is pressed, the feature changes in order of Random(Shuffle) Album➟Random (Shuffle) All➟Off. Press the ( List )button to display the Category Menu. • Random(Shuffle) Album : Shuffle Album plays album in Random(Shuffle) order.
Features of your vehicle ✽ NOTICE AUX MODE Using AUX Mode Press the MEDIA key Select [AUX] An external device can be connected to play music. Connecting an External Device External audio players (Camcorders, car VCR, etc.) can be played through a dedicated cable. • If an external device connector is connected with the AUX terminal, then AUX mode will automatically operate. Once the connector is disconnected, the previous mode will be restored.
Features of your vehicle 1. Mode Displays currently operating mode MY MUSIC MODE Basic Mode Screen 2. Operation State From Repeat/Random(Shuffle)/ Scan, displays the currently operating function 3. File Index Displays the current file/total number of files 4. File Info Displays information about the current file 5. Play/Pause Changes the play/pause state 6. Play Time Displays the current play time 7. Info Displays detailed information for the 4 42 current file 8.
Features of your vehicle Using My Music Mode ✽ NOTICE Selecting from the List Playing/Pausing My Music Files If there are no files saved within My Music, the [My Music] button will be disabled. Turn the TUNE knob left/right to search for the desired file. Changing Files SEEK Press the TRACK key to move to the previous or next file. ✽ NOTICE While playing, press the to pause and press play.
Features of your vehicle Rewinding / Fast-forwarding Files While playing, press and hold the SEEK key (over 0.8 seconds) to TRACK rewind or fast-forward the current file. My Music Mode Menu Within this mode, you will have access to the Info, Random(Shuffle), Repeat, Delete and List features. Info Press the ( Info )button to display details about the current file.
Features of your vehicle List Press the ( List )button to display the file list screen. List Menu From the List screen, it is possible to delete files you previously saved into My Music. Press the ( Select All )button or individually select the files you want to delete. Once files are selected, the ( Unselect All )button and ( Delete )buttons will be enabled.
Features of your vehicle ✽ NOTICE - USING THE Bluetooth® Wireless Technology Audio Mode • Bluetooth® Wireless Technology Audio Mode can be used only when a Wireless Technology Bluetooth® phone has been connected. Wireless Technology • Bluetooth® Audio Mode will not be available when connecting mobile phones that do not support this feature. Wireless • While Bluetooth® Technology Audio is playing, if the Wireless Technology Bluetooth® phone is connected, then the music will also stop.
Features of your vehicle ✽ NOTICE • If the Bluetooth® Wireless Technology audio is not operating properly, check whether the feature is turned off at SETUP [Phone] [Audio streaming] (Streaming Audio). If the feature is off, turn back on and try again. • If music is not yet playing from your mobile device after converting to Wireless Technology Bluetooth® Audio mode, pressing the play button once may start playing the mode.
Features of your vehicle Bluetooth® Wireless Technology (for RDS, Bluetooth® Wireless Technology equipped model) Using Bluetooth® Wireless Technology Handsfree • Bluetooth® Wireless Technology refers to a short-distance wireless networking technology which uses a 2.45GHz frequency to connect various devices within a certain distance.
Features of your vehicle ✽ NOTICE - USING UPON CONNECTING Bluetooth® Wireless Technology PHONE • Before connecting the car audio system with the mobile phone, check to see that the mobile phone supports Bluetooth® Wireless Technology features. • Even if the phone supports Bluetooth® Wireless Technology, the phone will not be found during device searches if the phone has been set to hidden state or the Bluetooth® Wireless Technology power is turned off.
Features of your vehicle (Continued) • Only Bluetooth® Wireless Technology Handsfree and Bluetooth® Wireless Technology audio related features will operate within this system. • Normal operation is possible only for devices that support Handsfree or audio features, such as a Bluetooth® Wireless Technology mobile phone or a Bluetooth® Wireless Technology audio device. • Only one function can be used at a time between the Bluetooth® Wireless Technology Handsfree and Bluetooth® Wireless Technology audio.
Features of your vehicle 1) Device : Name of device as shown when searching from your Bluetooth® Wireless Technology device 2) Passkey : Passkey used to pair the device 3. From your Bluetooth® Wireless Technology device (i.e. Mobile Phone), search and select your car audio system. 4. After a few moments, a screen is displayed where the passkey is entered. Here, enter the passkey “0000” to pair your Bluetooth® Wireless Technology device with the car audio system. 5.
Features of your vehicle ✽ NOTICE • The waiting period during phone pairing will last for one minute. The pairing process will fail if the device is not paired within the given time. If the pairing process fails, you must start the process from the beginning. • Generally, most Bluetooth® Wireless Technology devices will automatically connect once pairing is complete. However, some devices may require a separate verification process to connect.
Features of your vehicle Changing Priority What is Priority? It is possible to pair up to five Bluetooth® Wireless Technology devices with the car audio system. As a result, the “Change Priority’ feature is used to set the connection priority of paired phones. However, the most recently connected phone will always be set as the highest priority. From the paired phone list, select the phone you want to change to the highest priority, then press the button from the Menu.
Features of your vehicle Deleting a Device SETUP Press the key Select [Phone] Select [Paired Phone List] USING Bluetooth® Wireless Technology Phone Menu Screen Phone Menus With a Bluetooth® Wireless Technology device connected, press the PHONE key to display the Phone menu screen. From the paired phone list, select the device you want to delete and press the button.
Features of your vehicle Calling by Dialing a Number Press the Number] PHONE key Select [Dial 1) Dial Pad : Used to enter phone number 2) Call : If a number has been entered, calls the number If no number has been entered, switches to call history screen 3) End : Deletes the entered phone number 4) Delete : Deletes entered numbers one digit at a time Answering Calls Answering a Call Answering a call with a Bluetooth® Wireless Technology device connected will display the following screen.
Features of your vehicle During a Handsfree Call 1) Caller : Displays the other party’s name if the incoming caller is saved within your phone book 2) Incoming Number : Displays the incoming number 3) Call time : Displays the call time 4) End : Ends call 5) Private : Converts to Private mode 6) Out Vol. : Sets call volume as heard by the other party 7) Mute : Turns Mic Mute On/Off ✽ NOTICE If the mic is muted, the other party will not be able to hear your voice.
Features of your vehicle Phone Book Press the [Phone book] ✽ NOTICE PHONE key Select The list of saved phone book entries is displayed. Press the [Download] button to download the call history. 1) Contact List : - Displays downloaded phone book entries - Connects call upon selection 2) Download : Download phone book entries • Up to 1,000 phone book entries can be copied into car phone book. • Upon downloading phone book data, previously saved phone book data will be deleted.
Features of your vehicle Bluetooth® Wireless Technology (for Bluetooth® Wireless Pairing PHONE Key / Key on the Steering Remote Controller Technology equipped model) When No Devices have been Paired Pairing a Bluetooth® Wireless Technology wireless technology Device What is Bluetooth® Wireless Technology Pairing? Pairing refers to the process of synchronizing your Bluetooth® Wireless Technology phone or device with the car audio system for connection.
Features of your vehicle ✽ NOTICE • If Bluetooth® Wireless Technology devices are paired but none are currently connected, pressing the PHONE key or the key on the steering remote controller displays the following screen. Press the [Pair] button to pair a new device or press the [Connect] to connect a previously pair device. Pairing through [PHONE] Setup Press the SETUP key Select [Phone] Select [Pair Phone] Select TUNE knob 1.
Features of your vehicle Connecting a Device SETUP Press the key Select [Phone] Select [Paired Phone List] From the paired phone list, select the device you want to connect and press the Connect button. Changing Priority What is Priority? It is possible to pair up to five Bluetooth® Wireless Technology devices with the car audio system. As a result, the “Change Priority’ feature is used to set the connection priority of paired phones.
Features of your vehicle From the paired phone list, select the phone you want to change to the highest priority, then press the Change priority button from the Menu. The selected device will be changed to the highest priority. ✽ NOTICE Disconnecting a Device Deleting a Device SETUP Press the key Select [Phone] Select [Paired Phone List] SETUP Press the key Select [Phone] Select [Paired Phone List] From the paired phone list, select the currently connected device and press the Disconnect button.
Features of your vehicle ✽ NOTICE • When deleting the currently connected device, the device will automatically be disconnected to proceed with the deleting process. • If a paired Bluetooth® Wireless Technology device is deleted, the device’s call history and contacts data will also be deleted. • To re-use a deleted device, you must pair the device again.
Features of your vehicle Calling by Dialing a Number Press the Number] PHONE key Select [Dial 1) Dial Pad : Used to enter phone number 2) Call : If a number has been entered, calls the number If no number has been entered, switches to call history screen 3) End : Deletes the entered phone number 4) Delete : Deletes entered numbers one digit at a time Answering Calls Answering a Call Answering a call with a Bluetooth® Wireless Technology device connected will display the following screen.
Features of your vehicle During a Handsfree Call 1) Caller : Displays the other party’s name if the incoming caller is saved within your contacts 2) Incoming Number : Displays the incoming number 3) Call time : Displays the call time 4) End : Ends call 5) Private : Converts to Private mode 6) Out Vol. : Sets call volume as heard by the other party 7) Mute : Turns Mic Mute On/Off ✽ NOTICE If the mic is muted, the other party will not be able to hear your voice.
Features of your vehicle ✽ NOTICE • Up to 1,000 contacts entries can be copied into car contacts. • Upon downloading contacts data, previously saved contacts data will be deleted. • Downloading is not possible if the contacts download feature is turned off within the Bluetooth® Wireless Technology device. Also, some devices may require device authorization upon attempting to download. If downloading cannot be normally conducted, check the Bluetooth® Wireless Technology device setting or the screen state.
Features of your vehicle ✽ NOTICE - USING THE Voice Recognition • When using the voice recognition feature, only commands listed within the user's manual are supported. • Be aware that during the operation of the voice recognition system, pressing any key other than the key or touching the screen will terminate voice recognition mode.
Features of your vehicle VOICE RECOGNITION (if equipped) Using Voice Recognition Starting Voice Recognition Shortly press the key on the steering remote controller .Say a command Skipping Prompt Messages If voice recognition is in [Normal Mode], then the system will say “Please say a command. Beep~” • If voice recognition is in [Expert Mode], then the system will only say a “Beep~” • To change the Normal Mode/Expert Mode setting, go to SETUP [System] [Prompt Feedback].
Features of your vehicle ENDING VOICE RECOGNITION While Voice Recognition is operating Press and hold the key on the steering remote controller (over 0.8 seconds) ✽ NOTICE • While using voice command, pressing a steering wheel remote control or a different key will end voice command. • In a state where the system is waiting for a voice command, say “cancel” or “end” to end voice command.
Features of your vehicle ❈ Illustration on using voice commands • End voice command. Shortly pressing the • Starting voice command. Shortly pressing the key (under 0.8 seconds): key (under 0.8 seconds): Please say a command Ding~ Ding~ Please say a command Phone book More Help More Help. You can say Radio, FM, AM, Media, CD, USB, Aux, My Music, iPod, Bluetooth Audio, Phone, Call History or Phone book. Please say a command. Phone book. Please say the name of the phone book you want to call.
Features of your vehicle Voice Command List • Common Commands: These are commands that can be used in all situations. (However, some commands may not be supported in special circumstances.) Command More Help Help Call Phone Call History Phone book Dial Number Redial Radio 4 70 Function Provides guidance on commands that can be used anywhere in the system. Provides guidance on commands that can be used within the current mode.
Features of your vehicle Command Media Function Moves to the most recently played media screen. Play Track 1~30 If a music CD has been inserted, plays the corresponding track. CD Plays the music saved in the CD. Search CD Moves to the CD track or file selection screen. • For audio CDs, move to the screen and say the track number to play the corresponding track. • Moves to MP3 CD file selection screen. After manually operate the device to select and play music. USB Plays USB music.
Features of your vehicle • FM/AM radio commands: Commands that can be used while listening to FM, AM radio. Command Preset 1~6 Auto Store Function Plays the broadcast saved in Preset 1~6. Automatically selects radio broadcast frequencies with superior reception and saves in Presets 1~6. Preset Save 1~6 Saves the current broadcast frequency to Preset 1~6. Seek up Plays the next receivable broadcast. Seek down Plays the previous receivable broadcast.
Features of your vehicle • MP3 CD / USB commands: Commands that can be used while listening to music files saved in CD and USB. Command Random All Random Random Off Repeat Folder Repeat Repeat Off Next File Previous File Scan Search File Search Folder Information Copy Function Randomly plays the files within the current folder. Randomly plays all saved files. Cancels random play to play files in sequential order. Repeats the current file. Repeats all files in the current folder.
Features of your vehicle • My Music Commands: Commands that can be used while playing My Music. Command Random Random Off Repeat Repeat Off Next File Previous File Scan Search File Information Delete Delete All 4 74 Function Randomly plays all saved files. Cancels random play to play files in sequential order. Repeats the current file. Cancels repeat play to play files in sequential order. Plays the next file. Plays the previous file. Scans the files from the next files for 10 seconds each.
Features of your vehicle SETUP (for RDS, Bluetooth® Wireless Display Settings Pop-up Mode Technology equipped model) Adjusting the Brightness SETUP Press the key Select [Display] Select [Pop-up Mode] - AM904DMEE, AM914DMEE SETUP Press the key Select [Display] Select [Brightness] Starting Mode Press the SETUP key to display the Setup screen. You can select and control options related to [Display], [Sound], [Clock/Day], [Phone] and [System].
Features of your vehicle Scroll Text SETUP Press the key Select [Display] Select [Scroll text] This feature is used to scroll text displayed on the screen when it is too long to be displayed at once. When turned on, the text is repeatedly scrolled. When turned off, the text is scrolled just once. 4 76 MP3 Information Display SETUP Press the key Select [Display] Select [Song Info] This feature is used to change the information displayed within USB and MP3 CD modes.
Features of your vehicle Sound Settings Sound Settings SETUP Press the key Select [Sound] Select [Audio Setting] Use the , , , buttons to adjust the Fader/Balance settings. Use the , buttons to adjust the Bass/Middle/Treble settings. Press the Default button to reset. SDVC (Speed Dependent Volume Control) SETUP Press the key Select [Sound] Select [Speed Dependent Vol.
Features of your vehicle Voice Recognition Setting Touch Screen Beep Clock/Day Setting SETUP Press the key Select [Sound] Select [Volume Dialogue] SETUP Press the key Select [Sound] Select [Touch Screen Beep] Clock Setting SETUP Press the key Select [Clock/Day] Select [Clock Settings] Use the , buttons to set the Hour, Minutes and AM/PM setting. Use the , Volume Dialog. buttons to adjust the This feature is used to turn the touch screen beep on/off. ✽ NOTICE Press and hold the CLOCK key (over 0.
Features of your vehicle Calendar Setting SETUP Press the key Select [Clock/Day] Select [Day Settings] This feature is used to change the clock format between 12hr or 24hr. Clock Display Automatic RDS Time SETUP Press the key Select [Clock/Day] Select [Automatic RDS Time] SETUP Press the key Select [Clock/Day] Select [Clock Display (Power off)] Use the , buttons to set the Day, Month and Year setting. This feature is used to set time automatically by synchronizing with RDS.
Features of your vehicle Bluetooth® Wireless Technology Setting Viewing Paired Phone List SETUP Press the key Select [Phone] Select [Paired Phone List] Pairing a New Device SETUP Press the key Select [Phone] Select [Pair Phone] Bluetooth® Wireless Technology devices can be paired with the audio system. For more information, refer to the “Pairing through Phone Setup” section within Bluetooth® Wireless Technology. This feature is used to view mobile phones that have been paired with the audio system.
Features of your vehicle Downloading Phone books Auto Download (Phone Book) Audio Streaming SETUP Press the key Select [Phone] Select [Phone book Download] SETUP Press the key Select [Phone] Select [Auto Download] SETUP Press the key Select [Phone] Select [Audio Streaming] This feature is used to automatically download mobile phone book entries once a Bluetooth® Wireless Technology phone is connected.
Features of your vehicle Outgoing Volume CAUTION SETUP Press the key Select [Phone] Select [Outgoing Volume] • Bluetooth® Wireless Technology audio streaming may not be supported in some Bluetooth® Wireless Technology phones. Use the , buttons to adjust the outgoing volume level.
Features of your vehicle System Setting Voice Recognition Mode Setting (if equipped) Memory Information SETUP Press the key Select [System] Select [Voice Recognition System] SETUP Press the key Select [System] Select [Memory Information] This feature displays information related to system memory. 1) Using : Displays capacity currently in use 2) Capacity : Displays total capacity This feature is used to select the desired prompt feedback option from Normal and Expert.
Features of your vehicle SETUP (for Bluetooth® Wireless Display Settings Pop-up Mode Technology equipped model) Adjusting the Brightness SETUP Press the key Select [Display] Select [Mode Pop up] -AM900DMMG, AM910DMMG, AM911DMMG, AM901DMGG, AM910DMEE, AM911DMEE, AM910DMGL, AM900DMMN, AM910DMMN, AM912DMEE, AM911DMGL SETUP Press the key Select [Display] Select [Brightness] Starting Mode Press the SETUP key to display the Setup screen.
Features of your vehicle Text Scroll SETUP Press the key Select [Display] Select [Text Scroll] This feature is used to scroll text displayed on the screen when it is too long to be displayed at once. When turned on, the text is repeatedly scrolled. When turned off, the text is scrolled just once.
Features of your vehicle Use the , , , buttons to adjust the Fader/Balance settings. Use the , buttons to adjust the Bass/Middle/Treble settings. Press the Default button to reset. SDVC (Speed Dependent Volume Control) SETUP Press the key Select [Sound] Select [Speed Dependent Vol.
Features of your vehicle Clock/Calendar Setting Calendar Setting Clock Display Clock Setting SETUP Press the key Select [Clock/Calendar] Select [Calendar Settings] SETUP Press the key Select [Clock/Calendar] Select [Clock Display (Power off)] Use the , buttons to set the Day, Month and Year setting. This feature is used to display a clock on the screen when the audio system is turned off.
Features of your vehicle Bluetooth® Wireless Technology Setting Viewing Paired Phone List SETUP Press the key Select [Phone] Select [Paired Phone List] Pairing a New Device SETUP Press the key Select [Phone] Select [Pair Phone] Bluetooth® Wireless Technology devices can be paired with the audio system. For more information, refer to the “Pairing through Phone Setup” section within Bluetooth® Wireless Technology. This feature is used to view mobile phones that have been paired with the audio system.
Features of your vehicle Downloading Contacts Auto Download (Contacts) Streaming Audio SETUP Press the key Select [Phone] Select [Contacts Download] SETUP Press the key Select [Phone] Select [Auto Download] SETUP Press the key Select [Phone] Select [Streaming Audio] The contacts is downloaded from the mobile phone and the download progress is displayed. This feature is used to automatically download mobile contacts entries once a Bluetooth® Wireless Technology phone is connected.
Features of your vehicle Outgoing Volume System Setting SETUP Press the key Select [Phone] Select [Outgoing Volume] Memory Information SETUP Press the key Select [System] Select [Memory Information] Use the , buttons to adjust the outgoing volume level. This feature displays information related to system memory.
Features of your vehicle Language SETUP Press the key Select [System] Select [Language] This feature is used to change the system and voice recognition language. If the language is changed, the system will restart and apply the selected language. REAR VIEW CAMERA (if equipped) • The system has been equipped with a rear view camera for user safety by allowing a wider rear range of vision.
Features of your vehicle APPENDIX Name 12hr 24hr AST(A.
Features of your vehicle APPENDIX Name Phone Engineering Mode SEEK Icon Description Phone Engineering Mode SEEK Icon This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.