Features of your vehicle When a strong radio signal has reached your vehicle, the precise engineering of your audio system ensures the best possible quality reproduction. However, in some cases the signal coming to your vehicle may not be strong and clear. This can be due to factors such as the distance from the radio station, closeness of other strong radio stations or the presence of buildings, bridges or other large obstructions in the area.
Features of your vehicle FM radio station ¢ ¢¢ JBM003 JBM004 JBM005 FM broadcasts are transmitted at high frequencies and do not bend to follow the earth's surface. Because of this, FM broadcasts generally begin to fade at short distances from the station. Also, FM signals are easily affected by buildings, mountains, or other obstructions. These can result in certain listening conditions which might lead you to believe a problem exists with your radio.
Features of your vehicle Satellite radio reception You may experience difficulties in receiving XM™ satellite radio signals in the following situations. • If you are driving on a mountain road where is the signal blocked by mountains. NOTE: There may be other unforeseen circumstances leading to reception problems with the XM™ satellite radio signal. SATELLITE2 SATELLITE1 • If you are driving in a tunnel or a covered parking area. • If you are driving beneath the top level of a multi-level freeway.
Features of your vehicle Using a cellular phone or a two-way radio When a cellular phone is used inside the vehicle, noise may be produced from the audio equipment. This does not mean that something is wrong with the audio equipment. In such a case, use the cellular phone at a place as far as possible from the audio equipment. CAUTION When using a communication system such a cellular phone or a radio set inside the vehicle, a separate external antenna must be fitted.
Features of your vehicle ■ CD Player : PA710RB ❋There will be no logo if the Bluetooth® feature is not supported.
Features of your vehicle 3. SEEK Button SEEK • When the TRACK is pressed, it will automatically tune to the next lower station. SEEK • When the TRACK is pressed, it will automatically tune to the next higher station. 4. POWER Button & VOLUME Knob PA710RB_RADIO Using RADIO, SETUP, VOLUME and AUDIO CONTROL 1. FM Button Turns to FM mode and toggles FM1 and FM2 when the button is pressed each time. 2. AM Button Pressing the AM button selects the AM band. AM Mode is displayed on the LCD.
Features of your vehicle • MEDIA Select default display of MP3 play information. “Folder/File” or “Artist/Title” can be selected. PA710RB_RADIO 8. SETUP Button Press this button to enter SETUP mode, If no action is taken for 8 seconds, it will return to previous mode. In “SETUP” mode, rotate the TUNE knob to move the cursor between items, and push the TUNE knob to select. • MAIN Select this item to enter the Scroll and SDVC setup.
Features of your vehicle make immediately adjustments to the clock. Press the SETUP button for more than 3 seconds while in power off/on, you can enter the time setup screen directly. • PHONE Select this item to enter PHONE setup mode. Refer to “BLUETOOTH PHONE OPERATION” section for detailed information. PA710RB_RADIO 10. TUNE & AUDIO Knob • P.BASS (PowerBass) This function creates virtual sound effects and allows adjustments to the Bass level. Off ➟ Low ➟ Mid ➟ High ➟ Off...
Features of your vehicle • TREBLE Control To increase the TREBLE, rotate the knob clockwise, while to decrease the TREBLE, rotate the knob counterclockwise. • BALANCE Control Rotate the knob clockwise to emphasize right speaker sound (left speaker sound will be attenuated). When the control knob is turned counter clockwise, left speaker sound will be emphasized (right speaker sound will be attenuated).
Features of your vehicle SEEK • Push TRACK button for 0.8 second or longer to continuously move to next channel. • Radio ID : Seek or Tune to XM channel 0 to display the Radio ID. PA710RB_XM PA710RB_XM Using XM satellite Radio Your vehicle is equipped with 3 months complimentary period of XM Satellite Radio. XM provides access to over 130 channels of music, information, and entertainment programming. 1. XM 5. SCAN Button 3. PRESET Buttons 1 Push ~ 6 buttons less than 0.
Features of your vehicle PA710RB_XM 7. INFO Button Displays the information of the current channel in the order of Artist/Song title, Category/Channel name, Current Play Channel, Artist/Song title when the button is pressed each time. The complete text information is not displayed, rotate the TUNE knob to see the next page.
Features of your vehicle high speed sound search of current song. SEEK • Press TRACK button for less than 0.8 seconds to play the next song. SEEK • Press TRACK button for 0.8 seconds or longer to initiate forward direction high speed sound search of current song. 3. PA710RB_CD Using CD Player 1. CD/AUX Button (CD) If the CD is loaded, turns to CD mode. If no CD, it displays “No Media” for 3 seconds and returns to the previous mode. 2. TRACK Button SEEK • Press TRACK button for less than 0.
Features of your vehicle loaded. This CDP supports only 12cm CD. If VCD, Data CD are loaded, "Reading Error" message will appear and CD will be ejected. PA710RB_CD 8. SCAN Button 10. FOLDER Button CAT • Press FOLDER button to move to child folder of the current folder and display the first song in the folder. Press TUNE knob to move to the folder displayed. It will play the first song in the folder.
Features of your vehicle 2. Folder playing order : ❋ If no song file is contained in the folder, that folder is not displayed.
Features of your vehicle CAUTION IN USING USB DEVICE • To use an external USB device, make sure the device is not connected when starting up the vehicle. Connect the device after starting up. • If you start the engine when the USB device is connected, it may damage the USB device. (USB flashdrives are very sensitive to electric shock.) • If the engine is started up or turned off while the external USB device is connected, the external USB device may not work. • It may not play inauthentic MP3 or WMA files.
Features of your vehicle (Continued) • If the USB device is divided by logical drives, only the music files on the highest-priority drive are recognized by car audio. • Devices such as MP3 Player/ Cellular phone/Digital camera can be unrecognizable by standard USB I/F can be unrecognizable. • Charging through the USB may not be supported in some mobile devices. ❋ A car exclusive cable (sold separately) is required to use the iPod.
Features of your vehicle Press the button for 0.8 seconds or longer to play the song in reverse direction in fast speed. SEEK • Press the TRACK button for less than 0.8 seconds to move to the next song. Press the button for 0.8 seconds or longer to play the song in forward direction in fast speed. PA710RB_USB 5. SCAN Button 3. PA710RB_USB Using USB device 1. CD/AUX Button (USB) If USB is connected, it switches to the USB mode from the other mode to play the song files stored in the USB.
Features of your vehicle CAT • Press FOLDER button to move to parent folder display the first song in the folder. Press TUNE / ENTER knob to move to the folder displayed. PA710RB_USB 8. TUNE Knob & ENTER Button • Turn this knob clockwise to browse songs after current song, or counter clockwise to browse songs before current song. To play the displayed song, press the knob. • Pressing this knob without turning enters to AUDIO CONTROL mode.
Features of your vehicle ✽ NOTICE FOR USING THE iPod® DEVICE • Some iPod models might not support the communication protocol and the files will not be played. Supported iPod models: - iPod Mini - iPod 4th(Photo) ~ 6th(Classic) generation - iPod Nano 1st~4th generation - iPod Touch 1st~2nd generation • The order of search or playback of songs in the iPod can be different from the order searched in the audio system. • If the iPod disabled due to its own malfunction, reset the iPod.
Features of your vehicle PA710RB_iPod onds and press it again within 1 second to move to and play the previous track. Press the button for 0.8 seconds or longer to play the song in reverse direction in fast speed. SEEK • Press the TRACK button for less than 0.8 seconds to move to the next track. Press the button for 0.8 seconds or longer to play the song in forward direction in fast speed. ® Using iPod ❋ iPod ® is a trademark of Apple Inc. 1.
Features of your vehicle PA710RB_iPod 7. INFO Button Displays the information of the file currently played in the order of Title, Artist , Album, Normal Display (Displays no information if the file has no song information.
Features of your vehicle CAUTION IN USING BLUETOOTH® CELLULAR PHONE • Do not use a cellular phone or perform Bluetooth® settings (e.g. pairing a phone) while driving. • Some Bluetooth®-enabled phones may not be recognized by the system or fully compatible with the system. • Before using Bluetooth® related features of the audio system, refer your phone’s User’s Manual for phone-side Bluetooth® operations. • The phone must be paired to the audio system to use Bluetooth® related features.
Features of your vehicle BLUETOOTH® PHONE OPERATION (if equipped) 1 2 3 4 1. VOLUME button : Raises or lowers speaker volume. 2. button : Places and transfers calls. 3. button : Ends calls or cancels functions. 4. button : Activates voice recognition. ■ What is Bluetooth®? Bluetooth® is a wireless technology that allows multiple devices to be connected in a short range, low-powered devices like hands-free, stereo headset, wireless remocon, etc.
Features of your vehicle ■ Talking on the Phone When talking on the phone, “Active Call” message and the other party’s phone number (if available) are displayed on the audio. • To Finish a Call - Press button on the steering wheel. ✽ NOTICE In the following situations, you or the other party may have difficulty hearing each other: 1. Speaking at the same time, your voice may not reach each other parties. (This is not a malfunction.) Speak alternately with the other party on the phone. 2.
Features of your vehicle ■ Phone Setup All Bluetooth® related operations can be performed in PHONE menu. 1) Push the SETUP button to enter SETUP mode. 2) Rotate the TUNE knob to move the cursor between items and push the ENTER button to select "Phone" 3) Rotate the TUNE knob to move the cursor between items and push the ENTER button to select a desired item. • Pairing a phone Before using Bluetooth® features, the phone must be paired with the audio system. Up to 5 phones can be paired with the system.
Features of your vehicle Only a selected phone can be used with the hands-free system at a time. ➀ Press SETUP button to enter SETUP mode. ➁ Select “Phone”, then “Select” in PHONE menu. 1) “Priority” checked phone. 2) Previously connected phone 3) Gives up auto connection. ➂ Select desired phone name from the list shown. ➀ Press SETUP button to enter SETUP mode. ➁ Select “Phone”, then “Priority” in PHONE menu. ➂ Select desired phone name from the list shown.
Features of your vehicle ■ Voice Contacts Sync (Automatic Phonebook download setting) While in ADVANCED menu, select “Contacts” To automatically save the contacts and call history in your mobile phone each time you connect a mobile device, select ON. If you do not wish for automatic download, select OFF. It’s not available to make a phone call by Bluetooth audio system while the phonebook is being downloaded. Language of Bluetooth® voice recognition While in ADVANCED menu, press “Language”.
Features of your vehicle ■ Menu tree The menu tree identifies available voice recognition Bluetooth® functions. Call [Name] Ex) Call John (at Home) Dial [Number] Ex) Dial 911 Call By name By number Redial Call Back Phonebook Add entry By voice By phone Change name Delete name ✽ Tip ■ Voice Operation To get the best performance out of the Voice Recognition System, observe the followings: - Keep the interior of the vehicle as quiet as possible.
Features of your vehicle ✽ Tip ■ A shortcut to each of the following functions is available: 1. Say “Call Name” • Adding entry by voice Phone numbers and voice tags can be registered. Entries registered in the phone can also be transferred. • Dialing by Number A phone call can be made by dialing the spoken numbers. The system can recognize single digits from zero to nine. ➀ Press button. ➁ Say “Call”. ➂ Say “By number” when prompted. ➃ Say desired phone numbers.
Features of your vehicle • Adding Entry by Phone ➀ Press button. ➁ Say "Phonebook". ➂ Say "Add Entry" after prompt. ➃ Say "By Phone" to proceed. ➄ Say “Yes” to confirm. ➅ Your phone will start to transfer phone/contact list to the audio system. This process may take over 10 minutes depending on the phone model and number of entries ➆ Wait till the audio displays “Transfer Complete” message. • Changing Name The registered names can be modified. ➀ Press button. ➁ Say “Phonebook”.
Features of your vehicle ■ Key matrix Class No.
FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.