W150-ENG-1µµ¿¤æ˜ 2001.11.
W150-ENG-1µµ¿¤æ˜ 2001.11.1 1:28 AM ∆‰¿Ã¡ˆ2 U.S.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
W150-ENG-1µµ¿¤æ˜ 2001.11.1 1:28 AM ∆‰¿Ã¡ˆ3 DDEECCLLAARRATION ATION OF OF CONFORMITY CONFORMITY WE ImageQuest CO., LTD.
W150-ENG-1µµ¿¤æ˜ 2001.11.1 1:28 AM ∆‰¿Ã¡ˆ4 Contents 1. Introduction of W150 ......................1 OverView ...............................................1 Function ................................................1 Feature ..................................................1 2. Before the Operation ......................3 System structure ....................................3 Front of W150 .............................................3 Hot Keys .................................................
W150-ENG-1µµ¿¤æ˜ 2001.11.1 1:28 AM ∆‰¿Ã¡ˆ5 Terminal Connection Manager ...........13 New connection Creation .......................13 Additional Creation of ICA Connection ...14 Additional Creation of RDP Connection ...17 Connection Editing and Deletion ...........19 Editing of ICA Connection ..........................19 Editing of RDP Connection .........................19 Connection Deletion ..................................20 Start-up Connection Setup .....................20 Server Connection ......
W150-ENG-1µµ¿¤æ˜ 2001.11.1 1:28 AM ∆‰¿Ã¡ˆ1 1. Introduction of W150 Overview “Easy installation, Optimized function, The least expenses”. It is this web terminal’s strong points that you can expect when you utilize it in your environments. Under the basic environments of server based on computing and internet connection speed of 56kbps, you can use various applications on the high performance servers based on Windows 2000 Server OS as well as internet connection.
W150-ENG-1µµ¿¤æ˜ 2001.11.1 1:28 AM ∆‰¿Ã¡ˆ2 °§ Provides a user friendly GUI environment °§ Booting process is not necessary since the operating system is stored on ROM. Strong ARM CPU as of Intel °§ Low powered (4W) operation is available. °§ Size and Weight are reduced °§ Low noise ( no cooling fan is required ) Quick Booting Circuit Design (Compared to the general PC) During the Power On, system booting is performed in the last task environment.
W150-ENG-1µµ¿¤æ˜ 2001.11.1 1:28 AM ∆‰¿Ã¡ˆ3 2. Before the operation In the section, the structure and setup method of W150 is described. System Structure You should be familiar with the system structure for the proper connection of peripheral devices. Basic parts supplied include a mount ( Main body ), keyboard, mouse, adaptor, and AC power cord.
W150-ENG-1µµ¿¤æ˜ 2001.11.1 1:28 AM ∆‰¿Ã¡ˆ4 Hot Keys Power If you put briefly this button for screen on/off. The system is reset if you put the button for 3 seconds or longer. Web If you put this button, with the server connected state, Internet Explore Window of server is displayed. E-mail If you put this button, with the server connected state, Outlook Express of Window server is displayed. Bright This is used to adjust the brightness of the screen.
W150-ENG-1µµ¿¤æ˜ 2001.11.1 1:28 AM ∆‰¿Ã¡ˆ5 ICON NAME Functions Description This is a typical aerial bus. An external device that supports USB is faster than a serial port and easy to connect. Since USB supports the data transmission rate of 12Mbps, any types of peripheral devices can USB be connected without worrying about the operation (Optional) speed. In addition, it can accommodate up to 127 devices. Moreover, connection can be made during the PC operation as well.
W150-ENG-1µµ¿¤æ˜ 2001.11.1 1:28 AM ∆‰¿Ã¡ˆ6 System Connection In the proceeding section, the system connection order and method are described. The power should be off during the system connection. Connecting Keyboard Connect the keyboard to its port after checking whether the port is PS/2. Connecting Mouse Connect the mouse to its port after checking whether the port is PS/2. Connecting LAN Connect the RJ-45 jack to the LAN port. Connecting Adapter Connect the adapter to the POWER port and outlet.
W150-ENG-1µµ¿¤æ˜ 2001.11.1 1:28 AM ∆‰¿Ã¡ˆ7 3. Operation of W150 Setup of Operating Environment In this section, the operation of W150 under the server setup environment is described. For more details, ask your server manager. ßè Menu window Composition You should go through the following steps in order to set up W150 Properties. Menu window is displayed if you click right button of mouse from the desktop screen Menu window is composed following.
W150-ENG-1µµ¿¤æ˜ 2001.11.1 1:28 AM ∆‰¿Ã¡ˆ8 2. Click “property“ of Adaptor tap. 3. Select one of the following options from the “IP Address“ tab °§ If the network uses Dynamic Host Configuration Protocol (DHCP), click the above “Obtain an IP Address via DHCP“. °§ If you want to use Static IP information allocated to you, click the below “Specify an IP Address“ and then, enter IP Address, Subnet Mask, and Gateway. 4.
W150-ENG-1µµ¿¤æ˜ 2001.11.1 1:28 AM ∆‰¿Ã¡ˆ9 8. You can check “Restart system“ and click “OK“. Then, W150 is re-booted. ßè Setup of Preference Click “Preference“ from Menu window to display Terminal Preference window. Terminal Preference has the following two tabs. Manufacture : It shows factory-default settings and operating system version information. Preference : It enables you to set the name and information of this terminal, type of keyboard and screen saver function.
W150-ENG-1µµ¿¤æ˜ 2001.11.1 1:28 AM ∆‰¿Ã¡ˆ10 ßè Setup of Keyboard Features Keyboard features are changed based on you requirements and the type of board keyboard used. Repeat delay : Keyboard characters are displayed repeatedly. ( Ex : time passed until the next character is recognized during the key pressing.) Repeat Rate : The rate in which characters are repeated by the keyboard. You should go through the following steps in order to change keyboard features. 1.
W150-ENG-1µµ¿¤æ˜ 2001.11.1 1:28 AM ∆‰¿Ã¡ˆ11 2. Select the desired colors & Adjust brightness. 3. Click “OK“. ßè System Properties You can click “System Setting“ °Ê “OS & Memory“ from Menu window. You can display system information by clicking General. You can display a window for managing system memory by clicking Memory. ßè Volume & Sound Properties You can click “System Setting“ °Ê “Sound“ from Menu window. You can drag the audio slider bar on either side of it for volume adjustment.
W150-ENG-1µµ¿¤æ˜ 2001.11.1 1:28 AM ∆‰¿Ã¡ˆ12 Network Environment View ßè Ping Click “Network Test“ °Ê “Ping“ from Menu window to open “Ping“ window. You can check the connection condition when typing the opposite side IP or name on the “Destination Hostname or IP“ section and pressing the “Start“. ßè Ipconfig Click “Network Test“ °Ê “Ipconfig“ from Menu window to open “Ipconfig“ window. When clicking the “Ipconfig“ button, the information of the operating network will appear.
W150-ENG-1µµ¿¤æ˜ 2001.11.1 1:28 AM ∆‰¿Ã¡ˆ13 Terminal Connection Manager This is used when connecting the network of W150. In case you fail to setup Initial Start or Automatic Start Connection, Terminal Connection Manager is displayed automatically during the start and end of W150. The Host (Server) and Client (Terminal) are recognized based on the connection state. You can create, edit, and delete network connection Terminal Connection Manager window. ßè New Connection Creation 1.
W150-ENG-1µµ¿¤æ˜ 2001.11.1 1:28 AM ∆‰¿Ã¡ˆ14 °‹ Additional Creation of ICA Connection 1. Select Citrix ICA Client of New Connection window in order to display the Specify Connection Type Window. 2. Specify connection type. °§ Network connection : Direction connection line is required as in the case of °§ Network Connection 10/100Base-T Dial-in connection : modem is used. 3. Then, click “Next“. 4. All available Citrix server or application on the servers will be inquired and recognized.
W150-ENG-1µµ¿¤æ˜ 2001.11.1 1:28 AM ∆‰¿Ã¡ˆ15 7. Then, click “Next“. 8. Configuration can be made in such a way that same applications can be used from the selected server. You can leave it blank in order to specify Command Line and Working Directory or to use windows NT Desktop. 9. Then, click “Next“. 10. Specify Username, Password, and Domain in order to logon to the server automatically. 11. Then, click “Next“. 12. Select Window Colors desired on Select Window Option Window.
W150-ENG-1µµ¿¤æ˜ 2001.11.1 1:28 AM ∆‰¿Ã¡ˆ16 13. Click “Next“. 14. You can configure the ICA session. °§ Compress Data Stream - select this when connection is made with modem (modem dial-up) or WAN(Wide Area Network). °§ Enable Sound - select this if you use 10/100Base T as LAN (Local Area Network). When using Sound through WAN and modem, increasing usage of bandwidth causes some problems. °§ If you use modem or WAN, set “Sound Quality“ to LOW and “SpeedScreen“ to ON. 15. Click “Next“.
W150-ENG-1µµ¿¤æ˜ 2001.11.1 1:28 AM ∆‰¿Ã¡ˆ17 °‹ Additional Creation of RDP Connection 1. Select Microsoft Remote Desktop of New Connection window. Then, Windows Terminal Server (WTS) Connection Wizard Window is displayed. 2. Enter a name for new connection to the name area. 3. Enter the name of IP address of server to be connected to the server area. 4. Check Low Speed Connection when connection to the server is made through low Bandwidth lines such as WAN of serial line. 5. Then, click “Next“. 6.
W150-ENG-1µµ¿¤æ˜ 2001.11.1 1:28 AM ∆‰¿Ã¡ˆ18 8. The application that is selected instead of desktop can be configured. You can select Application File Name and specify Command Line and Working Directory. Or you can leave it blank in order to use Windows NT desktop. 9. Then, click “Next“. 10. Then, click “Finish“. You are now ready to connect to the server since the installation of WTS Connection Wizard has been completed.
W150-ENG-1µµ¿¤æ˜ 2001.11.1 1:28 AM ∆‰¿Ã¡ˆ19 ßè Connection Editing and Deletion °‹ Editing of ICA Connection ICA Connection editing is performed through the following steps. 1. Select ICA Connection to be edited from the Connection Name List of Terminal Connection Window. 2. Click “Edit “. Then, the Edit Connection Details window is displayed. 3. You can modify the information on each tap. Refer to the “Additional Creation of ICA Connection“ for the related tap information. ßí Editing of RDP Connection 1.
W150-ENG-1µµ¿¤æ˜ 2001.11.1 1:28 AM ∆‰¿Ã¡ˆ20 3. The Edit Connection Window has the following two taps. °§ Net Connections : Used to edit connection or logon automatically. °§ Application : Used to go automatically to the file name or working directory path whenever starting the session. 4. Change the Parts requires to be changed Net Connection or Application Area. 5. Then, click “OK“ after the completion. °‹ Connection Deletion 1. Select Connection Name of Terminal Connection Manager Window. 2.
W150-ENG-1µµ¿¤æ˜ 2001.11.1 1:28 AM ∆‰¿Ã¡ˆ21 ßè Server Connection Terminal Connection Manager lists all the network connections available for use. You Should go through the following steps in order to connect to the server. 1. Select a Connection Name on the list. 2. Click “Connection“ or double click “Connection Name“. If the connection has been defined as automatic logon, W150 is connected and you are logged on automatically. 3.
W150-ENG-1µµ¿¤æ˜ 2001.11.1 1:28 AM ∆‰¿Ã¡ˆ22 You should go through the following steps in order to change the connection. 1. Press CTRL+ALT+END to access to W150 Connection Manager. 2. Select Connection Name and then, click “Connect“. 3. Or press CTRL+ALT+UP or CTRL+ALT+DOWN in order to change the connection. Client Setting and Save ßè Client Setting Click “Client setting“ from Menu window to open “Client Setting“ window. 1.
W150-ENG-1µµ¿¤æ˜ 2001.11.1 1:28 AM ∆‰¿Ã¡ˆ23 ßè Save You can press “Save“ from Menu window, and then, The information that users have changed is saved on the FLASH ROM, so it cannot disappear if the power is gone off. Ending the Operation ßè Disconnecting Click the “System exit“ in its Windows Start menu. “Logoff“ or “Disconnect“ will be displayed. “Logoff“ closes all application programs and “Disconnect“ leaves application programs operating and just disconnects from the server.
W150-ENG-1µµ¿¤æ˜ 2001.11.1 1:28 AM ∆‰¿Ã¡ˆ24 4. Troubleshooting The followings provide some solutions to common problems when using setting up your terminal The monitor screen is blank. Check whether the power cord has been inserted properly into the terminal Check whether the monitor is properly plugged into an AC outlet. Check whether the Terminal is OFF. Check whether the system is on suspend mode. The mouse does not work. Check whether the mouse jack insert properly into the mouse port.
W150-ENG-1µµ¿¤æ˜ 2001.11.1 1:28 AM ∆‰¿Ã¡ˆ25 5.
W150-ENG-1µµ¿¤æ˜ 2001.11.
