NEXT Type No. L24COF080 Model.
U.S.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
DECLARATION OF CONFORMITY WE HYUNDAI IT CORP.
W240D Multi Function Monitor Contents 1. Introduction ...................................1/22 2. Safety Information ........................1/22 3. Installing the monitor ...................4/22 3-1. Packing List .........................................4/22 3-2. Selecting a suitable location ..............5/22 3-3. Connecting the pc................................5/22 3-4. watching the DVD/HDTV ...................7/22 3-5. Setting the refresh rate ......................9/22 Preset Timing Table ...........
W240D Multi Function Monitor 1. Introduction This manual contains instructions for installing and operating HYUNDAI IT CORP. W240D. HYUNDAI IT CORP. W240D is a highly ergonomic color display unit. • 24” viewable WUXGA LCD • High quality screen re-scaling capability • 100-240V AC input voltage • VESA DPMS (Display Power Management Signaling) • VESA DDC1/2B compatibility • Advanced digital On-Screen-Display controls • Digital Signal Input by DVI-1.
W240D Multi Function Monitor Avoid operating the monitor in extreme heat, humidity or areas affected by dust. Temperature : 5~35°C Humidity : 30~80RH Be sure to turn the monitor off before plugging the power cord into the socket. Make sure that the power cord and the other cords are securely and rightly connected. Overloaded AC outlets and extension cords are dangerous, as are frayed power cords and broken plugs, which may cause electric shock or fire. Call your service technician for replacement.
W240D Multi Function Monitor Cleaning and Maintenance • • • • • To avoid risk of electric shock, do not disassemble the display unit cabinet. The unit is not user-serviceable. Remember to unplug the display unit from the power outlet before cleaning. Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not use thinner or benzene, abrasive cleaners or compressed air. Do not wipe the screen with a cloth or sponge that could scratch the surface.
W240D Multi Function Monitor 3. Installing the monitor The following items should be found in the packaging. 3-1. Packing List Power Cord UK Japan America/Canada Europe South Africa Australia Signal Cable Audio Cable Compact Disc HDMI Cable Korea ! Above power cord can be changed upon different voltage areas. Please contact your dealer if anything is missing or damaged.
W240D Multi Function Monitor 3-2. Selecting a suitable location • • • • • 3-3. Connecting to a PC ! • 15 pin D-sub / DVI-D / HDMI 1. 2. 3. 4. Place the monitor at least 30cm from other electrical or heat-emitting equipment and allow at least 10cm on each side for ventilation. Place the monitor in a position where no light shines directly onto or is reflected on the screen. To reduce eye strain, avoid installing the display unit against a bright background such as a window.
W240D Multi Function Monitor • Connecting method 5. Turn on the power to the computer. The picture will appear within about 10 seconds. Adjust the picture to obtain optimum picture quality. See section Adjusting the picture in this guide for more information.
W240D Multi Function Monitor 3-4. Watching the DVD/HDTV • Connecting component cable • • Connect component cable (Y, Pb, Pr) between output terminal (Y, Pb, Pr) of DVD player and the input terminal (Y, Pb, Pr) of DVD on the rear of W240D. (Connect cable and terminal in the sane color) Connect Audio cable between Audio output terminal of DVD player and Audio input terminal for DVD Audio on the rear of W240D.
W240D Multi Function Monitor • Audio system This monitor has an audio system including two micro loudspeakers. Each of two micro loudspeakers has an 3W(max.) output power. This system also supports a headphone output jack. ! This system has been tuned to get a best tone quality which an audio input level is under 500mv rms. If the input level is more than 500mv rms, you must tune down the audio input as the audio output tone may be distorted.
W240D Multi Function Monitor 3-5. Setting the refresh rate Follow the instructions below to set your refresh rate in Windows 98/ME/XP/2000. 1. 2. 3. 4. 5. 6. Go to the configuration window(Start-Settings-Configuration window). Double click on the ‘Display’ icon. Click on the ‘Settings’ tab. Click on the ‘Advanced’ button. Click on ‘Adapter’ and select 60Hz from the list. Click on ‘Apply’ to accept the selected value.
W240D Multi Function Monitor Preset Timing Table If the signal from the system doesn't equal to the preset timing mode, adjust the mode with reference to the user guide of videocard because the screen may not be displayed. ! No. Resolution H-Freq.(kHz) V-Freq.
W240D Multi Function Monitor 3-6. User’s Environment Recommended Ergonomic User’s Environment • Viewing angle of the monitor should be between -3~17 degree.
W240D Multi Function Monitor Kensington Security (Locking) Slot • • This display unit supports a Kensington-type security device to secure your monitor. Kensington lock is not included. To purchase and install the Kensington locking device, please refer to the following contact information. * Kensington Technology Group · Address : 2000 Alameda de las Pulgas 2F san mateo, California 94403-1289 · Tel : +1 650 572 2700 · Fax : +1 650 572 9675 · Web-site : www.kensington.
W240D Multi Function Monitor 4. Adjusting the picture You can adjust the screen display by using the buttons located below the screen. The second and third Menu from the OSD can't be chosen in digital-mode.
W240D Multi Function Monitor 4-1. Using the On Screen Display To make adjustments in the On Screen Display, follow these steps: 1. 2. 3. 4. 5. 6. 4-2. Direct access buttons Push the MENU button to call the OSD to the screen. Push the or button to choose the item you want to adjust. The selected item is highlighted. Push the SELECT button to adjust the highlighted item. Use the or button to adjust the selection. Push the MENU button to return to the previous menu if you are in a submenu.
W240D Multi Function Monitor 4-3. OSD Adjustments PICTURE (SCREEN STATE ADJUSTMENT) BRIGHTNESS PICTURE BRIGHTNESS 100 CONTRAST 50 H.POSITION 60 V.POSITION 96 CLOCK 50 PHASE AUTO 45 ADJUST 50 RESOULTION : 1920x1200 60Hz VAG Adjusts the brightness of the screen. CONTRAST Adjusts the contrast of the screen. H.POSITION To move image left and right. V.POSITION To move image up and down CLOCK Adjust the horizontal size of the entire screen image. PHASE Adjust the noise of the screen image.
W240D Multi Function Monitor COLOR (SCREEN STATE ADJUSTMENT) STANDARD COLOR STANDARD REDISH For general Color tone. BLUISH REDISH USER RED 100 GREEN 50 BLUE 60 AUTO COLOR For Redish color with warm tone. BLUISH For Bluish color with cool tone. RESOULTION : 1920x1200 60Hz VAG USER For adjusting degree of RGB as Users want AUTO COLOR Adjust the horizontal size of the entire screen image. PHASE Adjust the noise of the screen image.
W240D Multi Function Monitor SOUND ( ADJUSTING THE AUDIO FUNCTION) VOLUME SOUND VOLUME 100 BASE 50 TREBLE 60 BALANCE 96 MUTE 15 Adjust the audio volume level. BASE Emphasize low frequency audio. TREBLE Empahsize high frequency audio. RESOULTION : 1920x1200 60Hz VGA BALANCE Use this function to balance sound from the left and right speakers.
W240D Multi Function Monitor LANGUAGE (OSD LANGUAGE ADJUSTMENT) You can select the language in which adjustment menus are displayed. The following languages are available. English, German, France, Italia, Spanish, Dutch, Swedish, Finnish, Danish, Portugal, Russian,Korea,Japan,China. LANGUAGE ENGLISH SUOMI DEUTSCH DANSK FRANÇAIS PORTUGES ITALIANO PYCCKNN ESPANOL 한국 DUTCH 日本語 SVENSKA 語言 RESOULTION : 1920x1200 60Hz 5.
W240D Multi Function Monitor 6. Troubleshooting If your monitor is not functioning properly, you may be able to solve the problem by following the suggestions below : Problem Blank screen Possible solution If the power LED is not lit, push the Soft power switch or check the AC cord to turn the monitor on. If the display unit is powered through the computer, check that the computer is switched on. The display unit might be in standby mode. Push one of the keyboard keys.
W240D Multi Function Monitor Problem Possible solution Color defects Check that the signal cable connector is properly connected and that the connection pins are not bent or damaged. Try another color temperature. Size, position, shape or quality unsatisfactory Adjust the picture characteristics as described in the section OSD Adjustment(4-3). Duplicated images A problem with your graphics adapter or display unit. Contact your service representative.
W240D Multi Function Monitor Problem The power LED is a orange color Possible solution LED Indicator can be orange color on changing of video mode or Input Signal. Check the Resolution and the frequency on the video part of your computer. Compare these values with the data in the Preset Timing Table. Contacting service If the above troubleshooting hints do not help you find a solution to the problem, contact an authorized service agent.
W240D Multi Function Monitor 7. Specifications LCD Display area Number of color Input signals Frequency rate Maximum bandwidth Maximum resolution Recommanded resolution Input voltage Power consumption Power management Plug & Play OSD menu Audio system VESA FPMPMI Ergonomics, Safety and EMC Operating Temperature Weight Dimensions (W X H X D mm) 24" viewable, Diagonal, Pixel pitch 0.270mm, A-si TFT 518.4(H) X 324(V), 24" Diagonal 16.7 million colors ( true 8-bit color ) R.G.
