NEXT Type No. L17T0D071 Model.
U.S.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
DECLARATION OF CONFORMITY WE HYUNDAI IT CORP.
Contents 1. Introduction ...........................................1/24 2. Safety Information .................................1/24 3. Installing the monitor ............................4/24 3-1. Packing List ..........................................4/24 3-2. Selecting a suitable location ...............5/24 3-3. Rear View & Signal Input Jacks .........6/24 3-4. Connecting the monitor .......................6/24 3-5. Setting the refresh rate ........................9/24 Preset Timing Table ..............
1. Introduction This manual contains instructions for installing and operating HYUNDAI IT G73TR. HYUNDAI IT G73TR. is a highly ergonomic color display unit. 7 YLHZDEOH 6;*$ /&' +LJK TXDOLW\ VFreen rH VFDOLQJ FDSDELOLW\ 9(6$ '306 'LVSOD\ 3RZHU 0DQDJHPHQW 6LJQDOLQJ 9(6$ ''& % FRPSDWLELOLW\ $GYDQFHG GLJLWDO 2Q 6Freen-Display controls )DVW DQG DFFXUDWH DXWR DGMXVWPHQW 0RVW DGYDQFHG LPDJH VFDOLQJ 6XSSRUWLQJ 9(6$ )ODW 3DQHO 0RQLWRU 3K\VLFDO 0RXQWLQJ ,QWHrface
Avoid operating the monitor in extreme heat, humidity or areas affected by dust. Temperature : 5~35°C Humidity : 30~80RH Be sure to turn the monitor off before plugging the power cord into the socket. Make sure that the power cord and the other cords are securely and rightly connected. Overloaded AC outlets and extension cords are dangerous, as are frayed power cords and broken plugs, which may cause electric shock or fire. Call your service technician for replacement.
Cleaning and Maintenance To avoid risk of electric shock, do not disassemble the display unit cabinet. The unit is not user-serviceable. Remember to unplug the display unit from the power outlet before cleaning. 'R QRW XVH DOFRKRO PHWK\O HWK\O RU LVRSropyl) or any strRQJ GLVVROYHQW 'R QRW use thinner or benzene, abrasive cleaners or compressed air. 'R QRW ZLSH WKH VFreen with a cloth or sponge that could scratch the surface.
3. Installing the monitor The following items should be found in the packaging. 3-1. Packing List Power Cord UK Japan America/Canada Europe Signal Cable DVI-D Cable USB Cable Manual CD & Touch Install CD ! Audio Cable South Africa AC/DC Power Adapter Korea Australia Above power cord can be changed upon different voltage areas. Please contact your dealer if anything is missing or damaged.
3-2. Selecting a suitable location 3ODFH WKH PRQLWRU DW OHDVW FP IrRP RWKHU HOHFWULFDO RU KHDW HPLWWLQJ HTXLSPHQW DQG DOORZ DW OHDVW FP RQ HDFK VLGH IRU YHQWLODWLRQ 3ODFH WKH PRQLWRU LQ D SRVLWLRQ ZKHrH QR OLJKW VKLQHV GLrectly onto or is rHIOHFWHG RQ WKH VFreen. To rHGXFH H\H VWUDLQ DYRLG LQVWDOOLQJ WKH GLVSOD\ XQLW DJDLQVW D EULJKW EDFNJrRXQG VXFK DV D ZLQGRw. 3RVLWLRQ WKH PRQLWRU VR WKDW WKH WRS RI WKH VFrHHQ LV QR KLJKHU WKDQ H\H OHYHO ˍGGG 3RVLWLRQ WKH PRQLWRU GLrHFWO\ L
3-4. Connecting the monitor ! Before you start cabling your monitor, check that the power is off on all units. To avoid any possibility of electric shock, always connect your equipment to properly earthed outlets.
1. 2. 3. 4. 5. 6. 7. 8. 9. Connect AC/DC Power Cable to Adaptor and then connect Adaptor Cable to Monitor through the jack "12V DC" . One end of "Audio Cable" to PC through the jack, "Audio Out". And the other end to Monitor " Audio In". Connect PC and Monitor through the jack, D-Sub (Analog signal) with D-Sub cable Connect PC and Monitor through the jack , DVI (Digital signal) with DVI Cable. Insert the other 15-pin signal cable connector into the 15-pin VGA connection on your computer and screw it down.
$XGLR V\VWHP 2SWLRQ 0RGHO 7KLV PRQLWRU KDV DQ DXGLR V\VWHP LQFOXGLQJ WZR PLFUR ORXGVSHDNHUV (DFK RI WKH WZR PLFUR ORXGVSHDNHUV KDV DQ 1: PD[ RXWSXW SRZHU 7KLV V\VWHP DOVR VXSSRUWV D KHDGSKRQH RXWSXW MDFN ! :KHQ WKLV PRQLWRU LV WXUQHG RQ DXGLR LV DOZD\V VHW XS DV RII PRGH 3OHDVH XVH $8',2 GLUHFW DFFHVV EXWWRQ RQ WKH IURQW FRYHU RU 2Q 6FUHHQ 'LVSOD\ WR SXW DXGLR RQ 8/24
3-5. Setting the refresh rate Follow the instructions below to set your refresh rate in Windows 98/ME/XP/2000/VISTA/7. 1. Go to the configuration window(Start-Settings-Configuration window). 2. Double click on the ‘Display’ icon. 3. Click on the ‘Settings’ tab. 4. Click on the ‘Advanced’ button. 5. Click on ‘Adapter’ and select 60Hz from the list. 6. Click on ‘Apply’ to accept the selected value.
Preset Timing Table ! If the signal from the system doesn't equal to the preset timing mode, adjust the mode with reference to the user’s guide of video card because the screen . may not be displayed. No. Resolution H-Freq V-Freq Mode 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 640 x 350 720 x 400 640 x 480 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1024 x 768 1152 x 864 1152 x 870 1280 x 1024 1280 x 1024 31.4 KHz 31.4 KHz 31.4 KHz 35.
3-6. Way to Install driver for touch monitor The driver for touch screen software enables to have mutual communication to touch screen-controller through and SUB Supporting organization This utility program enables test for the correction and draw test through the touch screen.Including addition and removal. Supporting many languages It's automatically installed according to the selected languages. English,Chinese,French,Spanish,German,Japanese,Italian and Dutch are available.
3-7. User’s Environment Recommended Ergonomic User’s Environment 7LOW DQJOH RI WKH PRQLW RU VKRXOG EH EHWZHHQ - a 15 GHJUHH Kensington Security (Locking) Slot 7KLV GLVSOD\ XQLW VXSSRUWV D .HQVLQJWRQ W\SH VHFXULW\ GHYice to secure your monitor. Kensington lock is not included. 7R SXrFKDVH DQG LQVWDOO WKH .
VESA MOUNT’G 7KLV GLVSOD\ XQLW VXSSRUWV 9(6$ )3030, VWDQGDUG IRU 75PP[75PP VFUHZ PRXQWLQJ E\ JLYLQJ VFUHZ KROHV RQ WKH 5HDU &RYHU RI WKH XQLW )RU EX\LQJ 9(6$ )ODW 3DQHO 0RQLWRU 0RXQWLQJ 'HYLFHV SOHDVH FRQWDFW IROORZLQJ LQIRUPDWLRQ ! 2QO\ 0 [ VL]H VFUHZ VKRXOG EH XVHG IRU SURSHU PRXQWLQJ 8VLQJ ZURQJ VL]H VFUHZ PD\ FDXVH GDPDJHV WR WKH GHYLFH * Ergotron, Inc.
4. Adjusting the picture You can adjust the screen display by using the buttons located below the screen.
4-1. Using the On Screen Display 4-2. Direct access buttons To make adjustments in the On Screen Display, follow these steps: 1. Push the MENU button to call the OSD to the screen. 2. Push the " + " or " - " button to choose the item you want to adjust. The selected item is highlighted. 3. Push the SELECT button to adjust the highlighted item. 4. Use the " + " or " - " button to adjust the selection. 5. Push the MENU button to return to the previous menu if you are in a submenu. 6.
4-3.OSD OSDAdjustments Adjustments 4-3. PICTURE BRIGHTNESS Adjusting the Brightness for all over the Screen. (At factory, they have set the initial Brightness to 50.) CONTRAST Adjusting the Contrast for all over the Screen. (At factory, they have set the initial Contrast to 50.) H.POSITION Moving the position of the screen horizontally. V.POSITION Moving the position of the screen vertically. PHASE Refine the Picture delicately. CLOCK Adjust the size of the Picture Horizontally. * At DVI mode, H.
AUTO ADJUST Adjusting the Picture Status to the optimum automatically. Color COLOR TEMPERATURE Adjusting Color Tone for all over the Picture.( At Digital mode, it is it not workable - USER : The user can adjust each color tone to its favorable tone like to the Reddish, Greenish or Bluish. When the adjustment is concluded, you can set it and exit from the adjustment by pressing "MENU" button. - Bluish : This makes the color tone of the picture to the Bluish.
OSD OSD H.POSITION Move OSD Window horizontally. OSD V.POSITION Move OSD Window vertically OSD TIMER Select the time while OSD Window remains on the screen. (10 Sec, 20 Sec, 30 Sec, 40 Sec) TRANSPARENCY Adjust the Transparency of OSD Window.
Miscellaneous LANGUAGE Decide the language for OSD Menu. RECALL If you select "Recall", the Picture will be out of the range and then come back to the range at almost same time. And all adjusted data will be back to the factory set. INPUT SELECT Decide the Input Signal between ANALOG and DIGITAL . AUDIO The sound from Speakers or Head Phone will be ON or OFF. VOLUME Hot Key Adjusting the sound volume from speakers. SOUND VOLUME Press “ - ” button and Volume Control Bar appears on the screen.
5. Display power management Reducing power consumption If the power management function of your computer is enabled, your monitor turns on and off automatically. You can control power management features from your computer. Your computer may have power management features which enable the computer or monitor to enter a power saving mode when the system is idle. You can reactivate the system by pressing any key or moving the mouse.
6. Troubleshooting If your monitor is not functioning properly, you may be able to solve the problem by following suggestions below : Problem Blank screen Possible solution If the power LED is not lit, push the Soft power switch or check the AC cord to turn the monitor on. If the display unit is powered through the computer, check that the computer is switched on. The display unit might be in standby mode. Push one of the keyboard keys. Check that the keyboard is properly connected to the computer.
Problem Possible solution Color defects Check that the signal cable connector is properly connected and that the connection pins are not bent or damaged. Try another color temperature. Size, position, shape or quality unsatisfactory Adjust the picture characteristics as described in the section OSD Adjustment (4-3). Duplicated images A problem with your graphics adapter or display unit. Contact your service representative.
Problem The power LED is a orange color Possible solution LED Indicator can be appear orange on changing of video mode or Input Signal. Check the Resolution and the frequency on the video part of your computer. Compare these values with the data in the Preset Timing Table. Contacting service If the above troubleshooting hints do not help you find a solution to the problem, contact an authorized service agent. If the monitor is sent for service, use the original package if possible.
7. Specifications LCD Display area Number of color Input signals Frequency rate Maximum bandwidth Maximum resolution Recommended resolution Input voltage Power consumption Power management Plug & Play OSD menu Audio system VESA FPMPMI Safety and EMC Operating Temperature Weight Dimensions (W X H X D mm) 17"viewable, Diagonal, Pixel pitch 0.264mm, A-Si TFT 337.92(H) x 270.336(V) mm 16.7 million colors R.G.B Analog, 15 pin D-sub / Digital TMDS(DVI-D) Horizontal : 31.0 to 80.
