Test Report No.
Owner s Manual DAH-520 Phone : 82-54-338-6000 Facsimile : 82-54-337-3075 Homepage : http://www.m-any.com E-mail: call@hyunwoninc.
Safety Warning and Precaution Please follow all warnings and safety precautions in this part to prevent any risk of electronic shock or property damage. Warning This symbol indicates the possibility of the personal death or personal hazardous damage. Caution This symbol indicates the possibility of the personal injury hazard or of the product damage. It indicates prohibition. It indicates 'Do not disassemble. It indicates 'Do not touch'. It indicates 'Must follow'.
Safety Instructions Warning To reduce danger of fire or electric shock, do not expose the product to rain or moisture. Transmit in any WMA or MP3 format music files without permission of the copyright owners is an infringement of copyright. The software program loaded in the operating CD-ROM is approved for only the personal use. To keep the qualified function Do not use the product under the hazardous conditions, such as extremely high or low temperature area, dusty area, or excessive wet area.
Welcome to the world of UltraFM. What is a digital audio player? What are MP3 and WMA File? Thank you for purchasing portable digital audio player UltraFM . UltraFM is MP3 Player with simple design and FM radio function. It has built-in memory of 64/96/128/256MB. It is able to support for format of new t compresses(1/12) data from CD through MPEG1-Layer3 and makes the data into a file that can be used in PC computers. It provides music equivalent of the quality of existing CDs.
Product Specification ITEM Division FM TUNER PC System Specification and Accessory PC Specification for UltraFM. Microsoft OS (Windows 98, ME, 2000, XP) CD-ROM drive CPU with over Pentium 200MHz RAM 32MB (Windows ME or 64MB for 2000) Hard disk with blank space of over 128MB (When saving music files, additional capacity of hard disk is needed.) USB port can be used. Specification FM frequency scope 87.5MHz ~ 108.
About Power Source About Power Source Amount of remaining battery power Turn on power : Press PLAY( ) button briefly (over 1 sec) (before battery dies) Turn off power : Press STOP( ) button for more than 3 seconds. When initially operating, the icons of the remaining capacity may not readable. (Battery usage time) (enough) (middle) (low) When using a general battery, the player could stop working, even though the battery capacity icon shows medium level, due to the peculiarity of the battery.
About Power Source Installation of M-ANY Loader Plus Please follow the procedure to install M-ANY Loader Plus. 2) Turn the bolt located Á on the back of the extended battery pack in clockwise rotation. Notice After installing M-ANY Loader Plus, connect UltraFM and PC by using USP Cable. 1. Insert M-ANY Loader Plus CD into CD-ROM drive. When CD is put in, Setup program is automatically executed and the screen below pops up. 3) Insert the battery after opening the extended battery pack cover and use it.
Installation of M-ANY Loader Plus How to connect UltraFM USB. 3. If you click on a finger, the screen below pops up. (If you click on the arrow below in order, the installation is completed.) Reference When connecting USB, the power of digital audio is turned on. When disconnecting USB after connecting, the digital audio player is rebooted. How to connect USB Cable. Let’s link UltraFM to PC like the picture below.
When USB Port is not installed and recognized. If the PC has USB drive, you need not install a new one. How to use M-ANY Loader Plus Double-click on M-ANY Loader Plus icon on the screen. Insert software CD into CD-ROM drive. (Don’t execute installation program.) M-ANY Loader Plus By using USB Cable, connect UltraFM and PC. (If the PC has no USB drive, the message A.File filter New Hardware Wizard comes up on the screen.) Proceed the installation as instructed on the screen.
How to use M-ANY Loader Plus How to Format Memory. Method by using format icon G. Functional Icons 1 Select the view for a basic memory of the body. Add the selected file to Memory. The chosen file appears in Memory window as waiting for download." 2 Upload the selected file from Memory into PC folder. (MP3,WMA file cannot be uploaded.) 3 Delete the selected file from Memory. Execute M-ANY Loader Plus and connect digital audio player with data USB Cable.
How to Format Memory How to download If you want to move favorite file from PC to digital audio player, follow the instruction below. Method by using menu button 1 Purchase MP3 file on the Internet and save it in PC. 2 Connect UltraFM with USB Cable. 3 Double-click M-ANY Loader Plus on the screen and execute the program. 4 Click Flash button on the menu bar. Fast format / Format All Fast format : Simply deleting file information saved in Memory of digital audio player make the process faster.
How to download How to upload 5 Select MP3 file or data file that will be downloaded on file list window. If you want to move file from UltraFM to PC, follow the instruction below. Then, click ADD button and “waiting for download” will appear in Memory window. Note) MP3/WMA file cannot be uploaded under related laws. (Other files can be uploaded.) How to upload file 1 Select directory or folder in folder window.
Explanation of LCD DISPLAY Error Message Major error message that can pop up while using M-ANY Loader Plus are as follows. Please note this when error message pops up. Error message Cannot read memory. Confirm Countermeasure 1) Is USB driver Verify the content of properly installed? UBS Controller from administrator of PC.(Verify if there°Øs HyunWon Tcc730 USB Driver.) a Cannot approach memory. Format Memory.
How to set up REPEAT MODE(1) How to set up REPEAT MODE(2) RANDOM / REPEAT MODE (Set up MODE for repeating songs : Setting the mode for a song unit) If you briefly press MODE while playing, REPEAT MODE DISPLAY is changed in the order below. REPEAT MODE(repeat an interval of the current song) 1) If you press MODE button for a while when playing a song, REPEAT MODE' is displayed. 2) If you press MODE button briefly, REPEAT A-’ is displayed. 3) After more than 3 seconds, press once MODE button briefly.
HOLD (Lock key) How to set up USER EQ HOLD(Lock key) USER EQ MODE -Button is not recognized. -When power is off, and HOLD is on, PLAY is not executed even if you press PLAY button. Of course, button is not recognized. HOLD button 1) Only when playing songs. If you press MODE button once for a while, REPEAT MODE is displayed. Then, if you press MODE button for a while, USER EQ is displayed. 2) You can set up EQ by using REW/FF, VOL UP/DOWN button.
Set up EQ MODE and Fast Searching Method How to set up voice and music recording MODE EQ MODE ( ) Record MODE 1) MODE can only be set up at STOP. 2) If you press REC button for a while, VOICE RECORD is displayed. If you press it again for a while, from MUSIC RECORD to ERASE MODE to VOICE RECORD is displayed. Live Latin Jazz Rock Dance User How to record voice The quality of sound can be deteriorated depending on music. In this case, if you set up EQ MODE, you can enjoy quality music.
How to set up voice and music recording MODE How to set up voice and music recording MODE How to record music 4)To stop recording, press STOP button. 1) Insert one end of Line In Cable into the earphone terminal of ordinary audio and other end into IN PUT AUDIO terminal of the product. 5)To play the recorded file, press PLAY button. The recorded file is displayed as V001, V002, V003,..... 2) While at STOP mode, press REC button twice for a while, then MUSIC RECORD is displayed on LDC screen.
How to set up voice and music recording MODE 4)To stop recording, press STOP button. 5)To play the recorded file, press PLAY button, and the file is displayed as E001, E002, E003,... 6)During recording, when memory is insufficient, Memory Full flashes three times. Then, Rec Stop is displayed and recording is automatically stopped. (If the battery is dead during recording, the recorded file is automatically saved and power is off.
FM RADIO MODE FM RADIO MODE Entering FM RADIO MODE 1) RADIO MODE can be entered only at STOP mode of MP player. 2) If you press MODE button for a while, FM Radio" is displayed and you can enter RADIO MODE. Listen to radio at FM RADIO MODE (Frequency 87.5MHz ~ 108.0MHz) 1) After entering RADIO MODE, press PLAY button to listen to FM radio.(RADIO MODE ) ( FM Radio” is displayed for about 3 seconds, and then received frequency is displayed.) - Antenna icon is displayed above FM icon.
Searching frequency Saving the frequency you want. Saving frequency with PreSet MODE 1) Press MODE button for a while at PLAY mode, PreSet MODE is started. (PreSet icon is displayed where Radio icon used to be shown.) 2) If you press MODE button at PreSet MODE, the received frequency is saved into PreSet Number that is displayed on LCD screen. (The frequency that was displayed in the middle of LCD screen flashes twice.) 3) PreSet Number can be searched by pressing FF/REW button briefly at PreSet MODE.
Saving your favorite frequency Erasing saved frequency Saving frequency at Auto Set MODE(saving various frequency at once) 1) If you press MODE button at PreSet MODE, Auto Set MODE is started. (Auto Set icon is displayed where PreSet icon used to be.) 2) If you press MODE button at Auto Set MODE briefly, Auto setting" is displayed for 1 sec in the middle of LCD screen, and 10 frequency (001~010) is automatically saved.
RADIO RECORD MODE RADIO RECORD MODE Entering RADIO RECORD MODE 1) If you press REC button at RADIO MODE while playing, RADIO RECORD” is displayed.( REC stand-by ) 3) If you press STOP or REC button briefly while recording, the recording is stopped. After REC Stop" is displayed for 1 sec and then file names (E001, E002, E003... ) are displayed for 1 sec. - File name: dentical to the name of music recording at MP Player MODE. The name can be changed after uploading in the PC by using Manager.
How to use product The product is not out of order when, Status How to use UltraFM No function of button 1. Verify polarity of battery and insert it. check did you insert a battery follow instruction after checking + or - , 2. Connect PC and UltraFM by using USB PORT USB Cable. 3. Purchase or download music file from PC communication or the Internet through M-ANY Loader Plus, and then save it to UltraFM. 4. Separate UltraFM from USB Cable and turn on power. 5.
FCC RF INTERFERENCE STATEMENT LIABILITY FOR DAMAGES TO THE CUSTOMERS NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Troubleshooting Problems Troubleshooting Problems If you encounter the following problems, follow the suggested solutions below 1. Ultrasm will not download digital files from the PC. - Check the cable connection to the USB port. 2. Ultrasm will not play. - Verify that the battery has been inserted correctly. - Check battery discharge status. 3. The M-Any Manager does NOT recognize the hardware connection. - Check the cable connection to the USB port. - You may need to re-install the software.
MEMO WARRANTY FORM One-year warranty Product Name : Model Name : Date of Purchase : Customer’s Name : (date) (month) (year) Phone : Address : Agent’s Name : Phone : Address : This Warranty Form with the date of purchase must be presented for warranty service. Please keep this warranty form well. 1. This product shall be entitled to warranty service as specified in the warranty form. 2.
MEMO