Test Report No.
User Manual Model No. : DAH-1200 Technical Support Tel : (82) 54-338-6000(+4 ext.) E-mail : call@hyunwoninc.com http://www.hyunwon.com USA & Canada Toll Free No. : 1-888-283-2580 E-mail : support@hwiamerica.com http://www.hwiamerica.
Safety Instructions Warning To reduce danger of fire or electric shock, do not expose the product to rain or moisture. Do not release or distribute the music files formatted in WMA or MP3 from the product to the public. (As this would violate Copyright laws.) The software contained on the installation CD-ROM is for personal use only and it not to be distributed.
Contents 1 2 3 4 5 6 8 10 11 12 14 16 18 19 20 21 24 25 26 27 28 29 31 32 33 35 36 38 39 40 41 42 44 45 46 48 50 51 Welcome to the world of MP3 What is a digital audio player? Product Specification PC System Specification and Accessories Hardware Overview Power Supply Installation of M-ANY Loader Plus How to connect MP3 with PC When USB Port is not recognized How to use mobiBLU Loader Plus How to format Memory How to download files How to upload files Explanation of LCD DISPLAY Power On and Off & Auto powe
What is a digital audio player? Product Specification What are MP3 and WMA File? MP3 and WMA files are compressed(1/12) data taken from CDs through MPEG1-Layer3 and converts the data into a file that can be used on computers. They provided music that has equivalent quality of existing CD. 1/2 Compression 1/12 Compression CD Data MP3 Data ITEM Division FM TUNER Frequency range 87.5MHz ~ 108.
Hardware Overview PC System Specification and Accessories PC Specification for the MP3 device. Microsoft OS (Windows 98, ME, 2000, XP) CD-ROM drive CPU with Pentium 200MHz or higher RAM 32MB ( 64MB for Windows ME or 2000 ) Hard disk with 128MB or more of free space (When saving music files, additional capacity of hard disk is needed.) USB port MP3 FM Accessories A. Program CD B. Earphones C. Manual D. Line-in Cable G. Neck Strap G. USB Cable H. Carrying case or Case with Armband (Optional Item) I.
Power Supply Power Supply Use 1 AAA size battery Icons indicating the remaining capacity of the battery . Open the battery cover by pushing in the direction of the arrow. When initially operating, the icons of the remaining capacity may not readable. (Battery usage time) (enough) (middle) (low) When using a general battery, the player could stop working, even though the battery capacity icon shows medium level, due to the peculiarity of the battery.
Installation of mobiBLU Loader Plus Installation of mobiBLU Loader Plus 3. If you click on a finger, the screen below pops up. (If you click on the arrow below in order, the installation is completed.) Notice In order for the player and your PC to communicate and transfer digital files, you must first install the mobiBLU Loader Plus by completing the following steps: 1. Insert mobiBLU Loader Plus CD into CD-ROM drive. When CD is put in, Setup program is automatically executed and the screen below pops up.
How to connect MP3 with PC When USB Port is not recognized Reference When connecting the USB to the player, the power of the device is turned on. Please refer to “Manager Program Help” in the installed mobiBLU Loader Plus 1. Open the Help site. How to connect USB Cable. See the graphic below for visual instruction on how to connect the MP3 to PC. If mobiBLU Loader Plus does not recognize the players memory when connecting disconnect the USB Cable from MP3 and then turn on the power and reconnect.
How to use mobiBLU Loader Plus How to use mobiBLU Loader Plus E. Folder Window A This window enables you to select audio files more easily by allowing you to browse specific folders of your PC. The selected folder contents are displayed in the File List Window to the right. B F. Memory Status This indicates the amount of memory available, the amount of total memory and memory connection status. This window may indicate "No Memory Found" in cases Slim Sound FM is not connected properly. C D G.
How to format Memory How to format Memory Using the Format icon When using the menu 1 Click! 2 Open the mobiBLU Loader Plus and connect digital audio player to the PC . Select the format type you prefer a dialog box will appear to verify format selected. Click! 3 If you click on the YES button format will begin, When formatting completes, a dialog box appear to let you know the format is complete. Click! 4 Normal format / Low level format Click the OK button to complete the process.
How to download files How to download files 1 Run mobiBLU Loader Plus and Connect MP3 to your computer. 3 Click the "Transfer" button to start downloading selected files to the memory. 2 Highlight file/s to be downloaded in the File List Window using the Folder Window to browse for folders containing your audio files. You may select files one of 3 ways: a.You may drag & drop individual files from the File List window to the Memory Contents Window. b.
How to upload files Explanation of LCD DISPLAY If you want to move file from MP3 to the PC, follow the instruction below. a b c d e f g a. Song title b. Current file extension c. Current state(PLAY , PAUSE ) d. Equalizer e. Play time f. Volume (0~30) g. TRACK Number h. HOLD i. ( )Repeat the current song, ( )Repeat all songs ( )Play all songs once in Random mode j. Voice and music recording k. Amount of battery Note MP3/WMA file cannot be uploaded under related laws.
Power On and Off & Auto power off How to use Folder Navigation Mode 1. Power On : Press Play ( ) button for 2 seconds or until the LCD illuminates. Play Music : Press Play( ) button shortly to play music. Get in Folder/File Navigation Mode It’s not available at Pause mode, FM Radio mode, and Recording mode. It’s only available at STOP mode of Music Play. a. If there are music files in the Root Folder, it’s ready to play the first music file(Stop Mode). b.
How to use Folder Navigation Mode How to use Folder Navigation Mode Move out from Folder Navigation Mode 3. Get into the selected sub folder with FF button. There are four ways to get out from this mode. 1. Press Mode button shortly during Navigation. It moves to the Stop Mode of Music Play and ready to play the finally selected file in the folder. Press Play button to play the current music. If there are sub folders, they will be listed after the last file. Press Play button to play the current music.
Set up Repeat modes Set up Section Repeat modes RANDOM / REPEAT MODE REPEAT MODE(Repeat an interval of the current song) 1. Press the MODE button for 2 seconds while the file is playing. REPEAT MODE' is displayed. 2. Press Mode button again shortly at desired beginning point. The message “Repeat A-” appears on the LCD display. 3. Press REC button again to mark the desired ending point. The message “Repeat A-B” appears on the LCD display. 4. File is repeated in the range between A and B.
Set up EQ Modes and Fast Searching Set up User’s EQ(User1, User2) EQ MODES There’re 5-preset EQ modes and two user’s EQ modes.(User 1 and User2) The mode will be changed by pressing play( )button for 2 seconds in play mode, in order, as follows; USER1 MODE, USER2 MODE Live Dance Jazz Latin Rock User 1 User 2 Each time you press PLAY button for 2 seconds the EQ settings will change in the order listed above. The option you stop at is the one that will be set on the player. 1.
How to Record Voice How to Record Music 1. Voice record function is only available while Player is in STOP MODE. 2. Press the REC button for 2 seconds, VOICE RECORD is displayed. 1. Insert one end of Encoding Cable into the earphone terminal of an ordinary audio device (ie: CD Player, Cassette deck, Radio) and the other end into IN PUT AUDIO terminal of the MP3. 3. Press the REC button shortly, voice recording is initiated. (REC icon is turned on in the lower part of LCD screen, and Recording...
How to Record Music Listening to Voice recorded files or Music files 4. To terminate recording, press the STOP button 1. There are two types of file formats. a. Music Files 5. To play the recorded file, press the PLAY button. The recorded file is displayed as E001, E002, E003,... : *.MP3 / *.MPE : *.WMA b. Voice Recorded Files : *.ADP 2. How to change the type of playing format MPE : Music Recorded files ( E ***. MPE ) are saved in this folder automatically.
How to Erase files How to use FM RADIO 1. Erase MODE can only be used while in STOP mode 2. Begin in STOP mode, Press the REC button for 2 seconds, VOICE RECORD is displayed, Press the REC button for a second time for 2 seconds, Music Record is displayed. Press the REC button for a third time for 2 seconds, Erase Mode is displayed. 1. RADIO MODE can only be initiated in STOP mode. 2.
How to use FM RADIO Searching FM frequency Listening to the radio FM RADIO MODE (Frequency 87.5MHz~108.0MHz) Searching frequency manually 1. After entering RADIO MODE, press the PLAY button shortly to listen 1. Press the FF/REW button shortly to search frequency. to the FM radio.(RADIO MODE ) (Frequency is increased or decreased by 0.05MHz.) - Antenna icon is displayed above FM icon. 2. Searching is possible in both STOP and PLAY MODE.
Saving the frequency(Preset Mode) Saving the frequency(Preset Mode) Saving frequency with Preset MODE Saving frequency at Auto Set MODE(saving various frequency at once) 1. While the Radio is playing Press the MODE button for 2 seconds, Preset MODE is started. (Preset icon is displayed where Radio icon was shown.) 2. If you press MODE button shortly at Preset MODE, the current frequency is saved in the Preset Number that is displayed on LCD screen.
Erasing saved frequency How to Record FM Radio Erasing Preset frequency (erasing all 10 at one time) 1. If you press MODE button for 2 seconds at Auto Set MODE, All Erase icon is displayed where Auto Set icon used to be. Then, All Erase MODE is started. 2. If you press MODE button shortly at All Erase MODE, Preset clear" is displayed and all the saved frequency is erased. All frequency belong to Preset number is initialized at 87.5MHz. 1.
Set up HOLD (Lock key) How to Record FM Radio 3. To terminate the recording press the STOP or REC button briefly the recording is stopped. REC Stop" is displayed for 1 sec and then file name is displayed for 1 second. (E001, E002, E003... ) - File name: The name of the file can be changed after uploading to the PC by using the mobiBLU Loader Plus. 4. If you press the STOP button for longer than 3 seconds while recording, the power is shut down, and the file being recorded is automatically saved.
Remote Control Manual Remote Control Manual b. User EQ Settings. - Press the EQ/MODE button for 2 seconds to change EQ while a song is playing. (Icon will be displayed on set’s LCD on setting EQ.) c. How to switch between MP3 Player and Radio mode - Press EQ/MODE button for 2 seconds on stop mode, the mode will (MP PLAYER MODE RADIO MODE) d. PLAY MODE Settings. - Being in STOP moe, press the EQ/MODE button, the mode will be changed between Repeat and Random mode. (Icon will be displayed on LCD on setting.
How to check the O/S and Manager version You need to visit our website(http://www.mobiBLU.com) from time to time to see if a new version of mobiBLU Loader Plus or a new version of MP3 Firmware(OS) for upgraded functions. 1. Run the manager of mobiBLU Loader Plus. 2. Connect MP3 to your PC with USB cable. 3. Select “Help” => “About Manager Program” and Click it How to upgrade mobiBLU Loader Plus 1. How to Install the manager newly ; a.
How to upgrade Firmware(O/S) How to upgrade Firmware(O/S) Please visit our website(http://www.mobiBLU.com) to see if a new O/S is released. You can check it with name of the patch file and its released date.The file name should be “MP3 OS_xxxxx.zip”. “xxxxx” will be OS version number. 1. Download the patch file(O/S installation file). 2. After uncompress zip file, MP3_xxxxxB.exe and MP3_xxxxxM file will be shown up. 3. Connect MP3 to your PC with USB cable. 4. Excute MP3_xxxxxB.exe first. Click! 6.
Troubleshooting Problems Troubleshooting Problems If you encounter any of the problems listed below, follow the suggested solutions. 1. MP3 will not download digital files from the PC. - Check the cable connection to the USB port. 2. MP3 will not play. - Verify that the battery has been inserted correctly. - Check battery discharge status. 3. The mobiBLU Loader Plus does NOT recognize the hardware connection. - Check the cable connection to the USB port. - You may need to re-install the software.
FCC RF INTERFERENCE STATEMENT WARRANTY SERVICE Customers are entitled to warranty service for a period of one year from the date of purchase. Warranty service does not apply to defects resulting from customer fault or acts of God. Note Non-warranty service shall apply to defects resulting from: 1. Infiltration of foreign matter, such as water, liquid, or sand. 2. Breakage due to dropping or severe impact. 3. Damage to or deformation of the outer case caused by organic solvents, such as benzene. 4.
