PNC370 PoC Terminal USER MANUAL
Preface Welcome to the world of Hytera and thank you for purchasing this product. This manual includes a description of the functions and step-by-step procedures for use. To avoid bodily injury or property loss caused by incorrect operation, please carefully read the Safety Information Booklet before use.
Copyright Information Hytera is the trademark or registered trademark of Hytera Communications Corporation Limited (the Company) in the People's Republic of China (PRC) and/or other countries or areas. The Company retains the ownership of its trademarks and product names. All other trademarks and/or product names that may be used in this manual are properties of their respective owners. The product described in this manual may include the Company's computer programs stored in memory or other media.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Contents Documentation Information ........................................................................................................... 1 1. Packing List ................................................................................................................................. 3 2. Product Overview ........................................................................................................................ 4 2.1 Product Layout .......................................................
Documentation Information Icon Conventions Icon Note Caution Description Indicates references that can further describe the related topics. Indicates situations that could cause data loss or equipment damage. Notation Conventions Item Boldface "" > Italic Courier New Description Example Denotes menus, tabs, parameter names, window names, dialogue names, and hardware buttons. Denotes messages, To save the configuration, click Apply. The Log Level Settings dialogue appears. Press the PTT key.
Key Operations Operation Short press Long press Press and hold Description Press and release quickly. Press and hold for the preset duration. Keep the key pressed.
1. Packing List Please unpack carefully and check that you have received the following items. If any item is missing or damaged, please contact your dealer. Item Quantity (PCS) Item Quantity (PCS) Terminal 1 Data Cable 1 Power Adapter 1 Strap 1 Battery Belt Clip 1 Battery Cover 1 Documentation Kit Figures in this manual are for reference only. 1 1 Check the main unit label inside the battery compartment to ensure that the purchased product is correct.
2. Product Overview 2.1 Product Layout 2.2 Key Functions Key Description OK/Menu key: Press to access a menu. Home key: Press to return to the home menu. Cancel/Back key: Press to return to the upper-level menu. Flashlight key: Press and hold to turn the flashlight on or off. On-Off key When the terminal is off, press and hold to turn it on. When the terminal is on, press and hold to turn it off or restart it. Programmable key. Programmable key.
3. Installation and Operation 3.1 Attaching the Battery Caution Use the approved battery by the Company to avoid the risk of explosion. Dispose of the used battery in accordance with "Precautions for Disposal" in the Safety Information Booklet. 1. Slide the battery latch to the unlock position and remove the battery cover. 3. Press the cover into place and slide the battery latch to the lock position. 2. Attach the battery. 3.2 Installing the SIM Card 1.
3.3 Charging the Battery Caution Read the Safety Information Booklet before charging. Use the approved charger to charge the battery. Use the approved external power supply (Ten Pao Industrial Co., Ltd., model: S010WU0500200, Input: 100-240 Va.c., 50/60 Hz, 0,4 A, Output: 5,0 Vd.c., 2000 mA). The remaining lithium-ion battery power is limited to 30% pursuant to the new lithium battery shipment regulation approved by International Air Transport Association (IATA).
3.5 Attaching the Audio Accessory Open the cover of the audio accessory connector and insert the audio accessory into the connector. To ensure optimum waterproof and dustproof performance, close the cover after removing the audio accessory. 3.6 Connecting to the Internet You can connect to the Internet by using the cellular network or WLAN network. To connect to the cellular network, install the SIM card and activate the cellular data service.
4. Status Indication 4.1 Checking LCD Indications Icon Terminal Status The battery is fully charged. The battery is nearly dead. The number of bars indicates the signal strength of the cellular network. The number of bars indicates the signal strength of the WLAN network. No SIM-card is detected. An audio accessory is connected. The BT feature is enabled. A BT device is connected. The positioning feature is enabled. 4.
5. Settings and Functions 5.1 Basic Settings You can access the setting interface by tapping to perform the following operations: If you want to... Set the language Adjust the brightness of the backlight Set the backlight Adjust the volume Turn the key tone on or off Turn the positioning feature on or off Turn the BT feature on or off View the terminal information Restore the terminal to factory settings Then... Select Language, and then select the language.
5.2 System Upgrade Before upgrading, ensure the battery power is more than 30%. Power outage during upgrade may cause upgrade failure. Insufficient storage may cause upgrade failure. When a new version becomes available, a red dot appears in the upper right of the System Upgrade icon . You can go to System Upgrade > Option > Check The Upgrade to view details on the new version. Online Upgrade 1. 2. Connect to a Wi-Fi network.
5.3 Application Management To install an application locally, transfer the APK file to the terminal using the computer, and then To uninstall an application, go to Setting > Apps > Download, select the required application, and access File Manager to select the file to install. then go to Detail > Option > Uninstall. To forcibly stop a running application, go to Setting > Apps > Download > Running, select the required application, and then go to Detail > Option > Force stop.
5.4 PoC Service Push-to-talk over Cellular (PoC) provides direct one-to-one and one-to-many voice communication services over the cellular network. This service is available only when you have installed the PoC application on the terminal. You can access the PoC menu to initiate a call. 1. Go to Home > PoC, and then press OK/Menu key. 2. Select the required contact. 3. Press and hold the PTT key and speak. You can listen to a call without any operation.
6. Troubleshooting Phenomena Analysis Solution The battery may be installed The terminal cannot be turned on. The terminal fails to respond to any operations. The keys do not work normally. The LED indicator does not work normally. The LCD does not display any information. The terminal fails to connect to the cellular network. Remove and reattach the battery. improperly. The battery power may run out. The battery may suffer from poor contact caused by dirty or damaged battery contacts.
Phenomena Analysis Solution The communication signal strength may be weak. Both the cellular network and WLAN the voice is weak or intermittent. The terminal fails to detect the SIM card. The terminal cannot locate your position. The battery fails to be charged. network coverage. are turned on, but the WLAN Turn the WLAN off. The communication signal strength Make sure the terminal is within the The volume level may be low. Increase the volume. connection is unstable.
7. Care and Cleaning To guarantee optimal performance as well as a long service life of the product, please follow these tips. 7.1 Product Care Do not pierce or scrape the product. Keep the product far away from substances that can corrode the circuitry. Do not hold the product by the antenna or earpiece cable. Close the audio accessory connector cover when no accessory is in use. 7.2 Product Cleaning Caution Turn the product off and remove the battery before cleaning.
8. Optional Accessories Contact your local dealer for the optional accessories used with the product. Caution Use the approved accessories only; otherwise, we will not be liable for any loss or damage arising out of the use of any unauthorized accessories.
is the trademark or registered trademark of Hytera Communications Corporation Limited. 201 8 H ytera Communications Corporation Limited. All Rights Reserved. Address: Hytera Tower, Hi-Tech Industrial Park North, 9108# Beihuan Road, Nanshan District, Shenzhen, People's Republic of China Postcode: 518057 http:// www.hytera.
