ZCS-HYT56 Portable Integrated Docking Station User Manual Hytera Communications Corporation Limited
Preface Welcome to the world of Hytera and thank you for purchasing this product. To derive optimum performance from the product, please read this manual carefully before use.
Icon Conventions The following icons are available through this manual: : indicates situations that could cause damage to your product or bodily injury. : indicates tips that can help you make better use of your product. Copyright Information Hytera is the trademark or registered trademark of Hytera Communications Corporation Limited (the Company) in the People's Republic of China (PRC) and/or other countries or areas. The Company retains the ownership of its trademarks and product names.
1. Packing List Please unpack carefully and check that you have received the following items. If any item is missing or damaged, please contact your dealer. Item Qty. (PCS) Item Qty. (PCS) 1 WLAN Antenna 1 Power Cord 1 Quick Reference Guide 1 Network Cable 1 Disk 1 Portable Integrated Docking Station Figures in this manual are only for reference.
2. Pro oductt Overrview 2.
3. Be efore Use U 3.1 Co onnectiing the e Powe er Cord d Pow wer Cord 3.2 Ac ccessin ng the Network To access thhe network, doo either of the following: work port on the back of the product. Insert thhe network cable into netw Install a WLAN anteenna.
4. Ba asic Operat O tions 4.1 Turning On O or Off O the e Produ uct 1. Connecct the productt to the powerr supply. 2. To turnn on the produuct, press the Power Buttoon. 3. To turnn off the produuct, press thee Power Buttton again. 4.2 Lo ogin You can perrform the basiic operations after login, but b the login or o logout stattus does not aaffect thetask progress. 1. Tap in the upperr right cornerr. 2. d Loggin interface,, enter the useer name and password.
Module Parameter File Save Path Description Set the storage path of BWC digital evidence. Set the password for BWC reading, programming, upgrade and Password data acquisition. Basic Settings IDS Number Unique identifier of the product for the DEM. When this option is selected, no authorization is required for the Auto Register BWC to connect to the product. DEM Address Set the address and port number of the DEM to which the product automatically uploads evidence files.
4.5 Se ettingPo orts You can sett the mappingg relationshippbetween thee port panel on the produuct and the physical port to which thee BWC is connnected, so that you can quuickly find the BWC. Thiss feature is avvailable only tto the "admin n" user. 1. Tap in the uppeer right cornerr. 2. Tap , and then select s thePorrt Settings tabb. 3. Set the total numberr of ports in Maximum n tapChange.. M Poorts, and then 4. Connecct the BWC too physical poorts of the prooduct in orderr from left to right.
8. TapOK. 4.6 Managing Users The "admin" user can manage common users,including adding the user, resetting the password, and deleting the user. This feature is available only for the "admin" user. 4.6.1 Adding the User 1. Tap in the upper right corner. 2. Tap , and then select the Usertab. 3. Tap New. 4. In the New window, enter the username and password. The default password of the new user is "111111". 5. Tap OK. 4.6.
2. Tap , and then select the User tab. 3. Tap the check box in No. to choose the user to be deleted. 4. Tap Delete. 4.7 Managing Devices You can add andimport the BWC for programming. 4.7.1 Adding the Device 1. Tap in the upper right corner. 2. Tap 3. Tap Add. 4. Set the following parameters. , and then select the Devices tab. Parameter 5. Description SN Serial number and unique identifier of a BWC. Officer ID Officer ID using the BWC. Officer Name Officer name using the BWC.
4.7.3 Approvin A ng the Device D With the Auuto Register feature fe enableed by default,, the product can directly acquire a data w when the BW WC is insertedd. With the Auuto Register feature fe disableed, the produuct needs to ap pprove the innitial access of the BWC ass follows: Tap . 4.7.4 Editing the Offic cer 1. Tap . 2. Edit thee BWC and officer o inform mation. 3. Tap OK K. 4.7.5 Deleting D the Dev vice The deleted BWC cannott upload digittal evidence to t the productt. 1. Tap 2.
4.8.3 Cancellin C ng the Program P mming Tasks T 1. In the upper u right coorner, click , and then select 2. Click thhe Programm ming template tab. 3. Select a template, annd then click Details. 4. Click Cancel. C . All programming tasks to be executed are cannceled. 5. Click OK. O 4.9 Ap pplying g for/Im mporting the License L e You have 900 days free triial to use all features f of thhe product. Affter that, you must apply ffor the licensee to use thesee functions aggain. 4.9.
5. Data Acquisition After the BWC is connected to the product, the product will automatically acquire data from the BWC.
6. More Functions For more detailsof the product functions, refer to Hytera IDS Operation Guide. To obtain the manual, tap in the upper right corner, and then tap .
7. Toubleshooting Phenomena Analysis Solution Disconnect the product from the power The memory module and the supply, clean the connecting fingerof the main board may have a poor memory module with an eraser, and then contact. re-insert the memory module. All fansworkintermittently, Replace the slot of the memory module. and the product displays "No signal" only. Memory module may Replace the memory module. malfunction.
Phenomena Boot Media in selected Boot Analysis Solution cannot detect the SSD. device and press a key". The product failed to The BWC may be inserted acquirethe the digital evidence improperly into the slot of from the BWC. the product. Remove the BWC, and then insert it into theslot of the product again. If the above solutions cannot solve your problems, or you may have some other queries, please contact us or your local dealer for more technical support.
8. Care and Cleaning To guarantee optimal performance as well as a long service life of the product, please follow these tips. Product Care Do not pierce or scrape the product. Keep the product far away from substances that can corrode the circuitry. Keep the product dry. Product Cleaning Turn off the product and remove the power cord before cleaning. Clean up the dust and fine particles on the product surface regularly with a clean and dry lint-free cloth or a brush.
9. Appendix—Product Description 9.1 Introduction The product with the IDS installed can acquire, sort, and store the data from the BWC. It is capable of collecting data from eight BWCs while recharging themsimultaneously.After data acquisition, the product will automatically delete the data in the BWC. You can manage the acquired data on the product or upload such data to the DEM. 9.
Data Acquisition The product automatically acquires evidencefrom the BWCwhich is properly inserted. Data Playback The product allows you to view evidence such as photos, audios, and videos. Evidence Upload For extended storage, the product allows you to upload the evidence to the DEM and check the upload status. 9.4 Technical Specifications Item Description Dimensions (H x W x D) 436mm x 298mm x 110mm Weight 9±0.5kg LCD Display 10.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications.
is the trademark or registered trademark of Hytera Communications Corporation Limited. © 2021 Hytera Communications Corporation Limited. All Rights Reserved. Address: Hytera Tower, Hi-Tech Industrial Park North, 9108# Beihuan Road, Nanshan District, Shenzhen, People's Republic of China Postcode: 518057 https://www.hytera.
