Q U I C K RE R E F E R E N C E GU GUIDE PT350 PORTABLE TERMINAL is the trademark or registered trademark of Hytera Communications Corporation Limited. 2018 Hytera Communications Corporation Limited. All Rights Reserved. Address: Hytera Tower, Hi-Tech Industrial Park North, 9108# Beihuan Road, Nanshan District, Shenzhen, People's Republic of China Postcode: 518057 http:// www.hytera.
Copyright Information Hytera is the trademark or registered trademark of Hytera Communications Corporation Limited (the Company) in the People's Republic of China (PRC) and/or other countries or copied, modified, translated, or distributed in any manner without the prior written consent of the Company. We do not guarantee, for any particular purpose, the accuracy, circuit to that of the receiver's outlet.
This radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications limits: Do not remove the RF Exposure Label from the device. http://www.fcc.gov/oet/rfsafety/rf-faqs.html User awareness instructions should accompany device Compliance with RF Exposure between two or more users over a distance. It uses radio frequency (RF) energy or radio waves to send and receive when transferred to other users.
ISEDC Statement EU Regulatory Conformance The device has been tested and complies with SAR limits, As certified by the qualified laboratory, the product is in users can obtain Canadian information on RF exposure and compliance with the essential requirements and other relevant compliance provisions of the following directives: 2014/53/EU, Après examen de ce matériel aux conformité aux limites DAS 2006/66/EC, 2011/65/EU, and 2012/19/EU.
Product Overview No. Part Name 1 Push-to-Talk (PTT) Key No. Built-in 14 Microphone Part Name 2 Side Key 1 (SK1) Accessory 15 Connector Cover 3 Side Key 2 (SK2) 16 Speaker No. Part Name Emergency Key 17 Menu Key 5 Group Selector Knob 18 Cancel/Back Key 6 Volume Control Knob 19 7 Operation Status Indicator 20 Navigation Keys 8 OLED Display 21 P3 Key 9 OK Key 22 P2 Key Product Layout No.
LED Indicator Charging Status Flashes orange rapidly The battery cannot be (every 0.2 second) charged due to overheating. Glows green The battery is fully charged. Glows red The battery fails to be charged. Flashes red rapidly The battery encounters communication error. Flashes green slowly (every 2 seconds) No battery is placed on the charger. Adjusting the Volume Selecting a Group To increase the volume, rotate the Volume Control knob clockwise.
2. Select On, and then press the OK key. With this feature enabled, the keypad will be locked automatically if no operation is made or no call/message is received within the preset time period. Status Indications Icon Terminal Status The keypad is locked. Icons There is/are unread short message(s). Icon Terminal Status An emergency call is in progress. Switching the Operation Mode The battery is being charged. The terminal can operate in direct mode (DMO) or trunking mode (TMO).
Indicator Terminal Status l The terminal is switching from DMO to TMO. Glows red The terminal is transmitting during a call. Flashes red rapidly The terminal is out of service. Indicator Flashes blue slowly Glows orange Flashes orange rapidly l The terminal is switching from TMO to DMO. l The terminal cannot request talk rights. l The talkgroup is an empty group. Flashes orange slowly The terminal is working in Fallback mode. Glows blue The BT feature is being enabled.
Ending a Group Call A group call ends when the calling party presses . The called party can exit the group call by pressing 1. Go to Menu > PhoneBook or Menu > Call Log > Dialed/Received/Missed, and then select the required individual contact. 2. Press and hold the PTT key. To initiate a full-duplex individual call, do as follows: .
2. Press emergency situations. With the highest priority, the emergency call can interrupt any calls with lower priority. or the PTT key. Receiving a PABX/PSTN Call When receiving a PABX/PSTN call, press or the PTT key to answer the call. Both the calling and the called party can speak without any operations during the call. The terminal can initiate an emergency call in one of the following modes: l Regular: The terminal gives visual and audio indications.
l The calling party long presses the Cancel/Back key. The called party can exit the emergency call by doing so. To end an emergency call in Silent mode, press the OK key and then the P3 key. Message Services Short Messages Short messages include status messages and text messages. Emergency Cycle During an emergency call, the called party cannot request talk permit until the calling party presses the PTT key. To avoid this situation, request your dealer to configure the Emergency Cycle feature.
2. Select the required message or template, and then press the OK key. 3. Press the Menu key, and then select Delete. 4. Press the OK key to confirm. Deleting All Messages To delete all messages, do as follows: 1. Go to Menu > Message > Delete. 2. Select Delete All/All Read/Inbox/Outbox/Templates, and then press the OK key. 3. Press the OK key to confirm. Templates A short data template is a predefined text message that can be sent to the required contact.