EDS50 Wall-mounted Docking Station User Manual Hytera Communications Corporation Limited
Preface Welcome to the world of Hytera and thank you for purchasing this product. To derive optimum performance from the product, please read this manual carefully before use.
Icon Conventions The following icons are available through this manual: : indicates situations that could cause damage to your product or bodily injury. : indicates tips that can help you make better use of your product. Copyright Information Hytera is the trademark or registered trademark of Hytera Communications Corporation Limited (the Company) in the People's Republic of China (PRC) and/or other countries or areas. The Company retains the ownership of its trademarks and product names.
1. Packing List Unpack carefully and check that you have received the following items. If any item is missing or damaged, contact your dealer. Item Qty. (PCS) Item Qty. (PCS) Docking Station 1 WLAN Antenna 2 Power Cord 1 Bracket 1 Network Cable 1 Disk 1 M8 x 60 mm Expansion Bolt 7 Documentation Kit 1 Figures in this manual are only for reference.
2. Product Overview 2.1 Product Layout No. Part Name No. Part Name No. Part Name 1 Display 8 Hard Disk Drive (HDD) Bay 15 USB Port 2 Speaker 9 Power Button 16 Network Port 3 Fingerprint Reader 10 HDD Bay Lock 17 Mortise Lock 4 NFC Card Reader 11 Air Inlet 18 Fan 5 BWC Pocket 12 Grounding Stud 19 WLAN Antenna Port 6 Connector 13 Power Inlet 20 Hang Hole 7 Mortise 14 Power Switch / / 2.
Item LCD Display Description Extended EDS50: 7.8 kg 13.3-inch LCD touchscreen Resolution: 1920 x 1080 Quantity of Inserted BWCs 6 CPU Dual-core, Intel 3855U, 1.6 GHz Memory 8 GB Hard Disk Capacity 4 TB USB Port 2 x USB 2.0 Network Port RJ45 port WLAN 2.4 GHz/5 GHz, 802.
3. Before Use 3.1 Installation Precautions When you install the EDS50 on the wall, make sure that the following requirements are met. Wall materials: solid concrete blocks Wall thickness: ≥ 203 mm Dimensions of a concrete block (H x W x D): 203 mm x 406 mm x 203 mm 3.2 Installation Install the Main EDS50 Fix the bracket on the wall through expansion bolts. Align the hang holes on the back of the main EDS50 with the protrusions on the bracket.
Install the Extended EDS50 You can install up to three extended EDS50 including EDS50-Ext1, EDS50-Ext2, and EDS50-Ext3 to the left side of the main EDS50 in order. You need to purchase the extended EDS50 separately. Align the bracket of the extended EDS50 with that of the main EDS50. Fix the bracket on the wall through expansion bolts. On the left side of the main EDS50, unscrew the two screws on the aluminum panel, and then remove this panel.
Tighten the mortise locks. Repeat the above steps to install other extended EDS50. 3.3 Connect the Ground Wire Make a ground wire (≥ 6 mm2) with proper length, and then install OT terminals at both ends of the wire. The metal wires must be completely sealed. Connect the OT terminal at one end of the wire to the M6 grounding stud of the EDS50, and the OT terminal at the other end to the internal grounding bar. 3.
3.5 Access the Network To access the network, do either of the following: Insert the network cable into the network port of the EDS50. Install a WLAN antenna.
4. Basic Operations 4.1 Turn On the Product Connect the product to the power supply. Toggle the Power Switch to on (I) position. Press the Power Button. 4.2 Turn Off the Product Press the Power Button. Toggle the Power Switch to off (O) position. 4.3 Log In to the Account You can perform the related operations only after login. Through Password In the upper right corner, tap . In the Login dialog box, enter the user name and password.
If the product remains idle for more than ten minutes, it will automatically log out. 4.5 Set Data Acquisition Parameters You can set the parameters that are used to acquire digital evidence from BWCs by the product and the Digital Evidence Management (DEM). This operation is available only to the "admin" user. In the upper right corner, tap Tap . , and then select the Acquisition Settings tab. Set the following parameters.
Module Parameter Description Important: Only the marked digital evidence will be uploaded. Not important: Only the unmarked digital evidence will be uploaded. Days of Electronic Not Important Set the retention time for unmarked digital evidence. Important Set the retention time for marked digital evidence. Evidence Preservation Tap OK. 4.
(Optional) Select a port, and then select Preferred. The product will first acquire data from the BWC connected to this port and suspend data acquisition from other ports automatically. After the data acquisition from this port completes, other ports resume. Tap OK. 4.7 Manage Users Only the "admin" user can manage common users, including adding the user, adding the fingerprint, resetting the password, and clearing the fingerprint. 4.7.1 Add the User In the upper right corner, tap Tap .
Tap OK. 4.7.2 (Optional) Add the Fingerprint The "admin" user can add the fingerprint for himself and common users. Then the "admin" user and common users can log in to the product by the fingerprint. In the upper right corner, tap Tap . , and then select the User tab. Tap Fingerprint 1 or Fingerprint 2. In the New Fingerprint dialog box, add the fingerprint according to the prompt. 4.7.3 Reset the Password The "admin" user can reset the password of common users to "111111".
Set the following parameters. Parameter Description SN Serial number and unique identifier of a BWC. Officer ID ID of the officer using the BWC. Officer Name Name of the officer using the BWC. Tap OK. 4.8.2 Import the Device You can import BWCs in batches. In the upper right corner, tap Tap . , and then select Devices tab. Tap Download template. Open the template, and then fill in the following parameters. Parameter Description SN Serial number and unique identifier of a BWC.
In the Edit dialog box, edit the BWC and officer information. Tap Parameters. 4.9 Manage Officers 4.9.1 Add the Officer In the upper right corner, tap Tap . , and then select Officer Management tab. Tap Add. In the New Officer dialog box, fill in the following parameters. Parameter Description Officer ID ID of the officer using the BWC. Officer Name Name of the officer using the BWC. Card ID ID of the NFC card used by the officer. Tap OK. 4.9.
In the About dialog box, tap Export License. Choose the file save path, and then enter the file name. Tap Save. Send the key license application file to Hytera to obtain the license. 4.10.2 Import the License Ensure that you have obtained the license file (in .license format) and plugged the dongle to the product. In the upper right corner, tap Tap . . In the About dialog box, tap Import License. Choose the obtained license, and then tap Open. Tap OK. 4.11 Acquire Data Turn on the BWC.
Close the BWC pocket door. 4.12 More Functions For more details of the product functions, refer to Hytera IDS Operation Guide. To obtain the manual, tap in the upper right corner, and then tap .
5. Troubleshooting Phenomena Analysis Solution Turn on the product, and then press the DEL key to enter the BIOS. The product fails to be turned The BIOS startup item may In the Boot tab, set the first startup item to be set incorrectly. system disk. on after the USB flash drive or other USB device is inserted. Press the F10 or F4 key to save your changes and restart the product. Power on the product, and then press the DEL key to enter the BIOS.
Phenomena Analysis The product shows a partially The display may blurred screen. malfunction. The product fails to acquire The BWC may be inserted the digital evidence from the improperly into the slot of BWC. the product. Solution Replace the display. Remove the BWC, and then insert it into the slot of the product again.
6. Care and Cleaning To guarantee optimal performance as well as a long service life of the product, follow these tips. Product Care Do not pierce or scrape the product. Keep the product far away from substances that can corrode the circuitry. Keep the product dry. Product Cleaning Turn off the product and remove the power cord before cleaning. Clean up the dust and fine particles on the product surface regularly with a clean and dry lint-free cloth or a brush.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications.
