Preface Thanks for your favor in our product. To derive optimum performance from the product, please read this manual carefully before use.
Disclaimer Hytera Communications Corporation Limited (the Company) endeavors to achieve the accuracy and completeness of this manual, but no warranty of accuracy or reliability is given. All the specifications and designs are subject to change without notice due to continuous technology development. No part of this manual may be copied, modified, translated, or distributed in any manner without the express written permission of us.
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna.
1. Items in the Package Please unpack carefully and make sure all items listed below are received. If any item is missing or damaged, please contact your dealer. No. Name Qty. 1 Wireless Audio Adapter 1 2 Owner’s Manual 1 Note Wireless ring PTT mentioned in this manual is an optional accessory. Please contact us or your local dealer for details.
2. Product Overview This exquisite and low-powered wireless audio adapter is applicable to MD65X/MD78X conventional mobile radios with firmware version of V7.00.10.000 and above. 2.1 Product Controls ① ② No. ③ Part Name ④ No. ⑤ ⑥ Part Name 1 Indication Point 4 Lock Knob 2 POGO Pin 5 LED Indicator 3 Aviation Connector 6 PTT (Push-to-talk)/Multi-functional Key 2.2 LED Indicator LED Indication The LED indicator flashes red and blue Wireless Audio Adapter Status Pairing alternatively.
LED Indication The LED Indicator glows blue.
3. Before Use 3.1 Installing Wireless Audio Adapter Step 1 Make the indication point face upward, adjust the lock knob and fix the wireless audio adapter into the remote speaker microphone connector properly. Step 2 Rotate the lock knob clockwise to fasten it.
4. Basic Operations 4.1 Powering On/Off Power On Turn on the mobile radio. The LED indicator flashes after the wireless audio adapter is powered on. Please refer to 2.2 LED Indicator for details. Power Off Turn off the mobile radio. 4.2 Pairing with and Connecting to the Adapter Pairing and connection involve the following situations. Please pair and connect the devices per actual needs before use. Afterwards, the devices will be connected automatically upon power-on.
4.2.2 Using Wireless Audio Adapter with Wireless Device and Wireless Ring PTT Step 1 Turn off other devices connected to wireless audio adapter, Wireless Device and wireless ring PTT. Step 2 Turn off the wireless ring PTT. Step 3 Turn on the mobile radio. Step 4 Long press the PTT/Multi-functional Key of the wireless audio adapter until the LED indicator flashes red and blue alternatively to enter pairing mode. Step 5 Wireless Device enters pairing mode.
4.3 Transmitting Hold down the PTT/Multi-functional key of the wireless audio adapter to transmit.
5. Troubleshooting Phenomena Analysis Solution Make sure the device is within communication range and pair again. (Max communication Fail to reconnect The device may be out of distance is 10 meters when there is no automatically. communication range. obstacle. Communication distance will be shortened when there is obstacle.) Noise in communication. LED indicator does not glow red when The device may be out of Make sure the device is within communication communication range. range.
6. Care and Cleaning To guarantee optimal performance as well as a long service life of the product, please follow the tips below. Product Care Do not pierce or scrape the product. Keep the product far away from substances that can corrode the circuit. Product Cleaning Caution Turn of the wireless audio adapter before cleaning. Clean up the dust and fine particles on the product surface and charging piece with a clean and dry lint-free cloth or a brush regularly.