Product Description

3. Installation Procedure
3.1 Installation method with plastic clamp
①Loosen the screws on the back of clamp with the provided
screw driver.
②Open the lining of helmet,insert the clamp in the proper
position on the left of helmet and fasten the screw(overly
fastened screw can damage the clamp)
③Slide the receiver down into the slots on the headset clamp
mount.Make sure that it is locked in securely.
④Open the lining of helmet(at ear 's position),clean the EPS
surface and affix the Velcro on with the rough surface.
⑤Affix the hook surface of earphone to the rough surface of
Velcro and properly tidy the helmet lining.
⑥Insert the headphone plug into the corresponding
headphone jack on the receiver to finish the installation.
4