HYSNOX Helmet Bluetooth Intercom Headset Model:HY-01
HY-01 bluetooth headset intercom Table of Contents 1.Introduction............................................................................................................................1 1.1 Product Descriptions........................................................................................................1 1.2 Main Functions................................................................................................................2 2.Package Contents........................................
1. Introduction 1.1 Product introduction HY-01 is a full-duplex intercom Bluetooth headset for motorcycle riders with the design that enables clear and safe wireless communication during riding. Compatible with all Bluetooth mobile phones and any type of helmet, our products paired with the mobile phones to allow the riders to receive and unplug calls, listen to music, listen to FM radio and receive GPS navigation voice prompts, etc., at the same time, two or three sets of network intercom call. 1.
1.2 Main Functions (1) After paired with a mobile phone, our products can answer incoming calls, reject calls or hang up calls within a visible range of 10 meters; (2) Our products can maintain the full-duplex intercom between the helmet Bluetooth headsets at a distance of up to 1000 meters.
2. Package Contents 1. Bluetooth Device 6.Headphone Velcro 2. Microphone&Ear Speakers 7.USB Cable 3. Velcro Clamp 8. Screw Driver 4. Hook and loop fasteners 9.Manual 5.
3. Installation Procedure 3.1 Installation method with plastic clamp ①Loosen the screws on the back of clamp with the provided screw driver. ②Open the lining of helmet,insert the clamp in the proper position on the left of helmet and fasten the screw(overly fastened screw can damage the clamp) ③Slide the receiver down into the slots on the headset clamp mount.Make sure that it is locked in securely.
3.2 Installation method with velcro clamp You can directly use the Velcro to mount the bluetooth device on the edge of helmet. See the following pictures. ①Tear off the white paper on velcro and stick the velcro onto clamp&helmet ②Stick the clamp with velcro onto helmet ③Slide the receiver down into the slots on the headset clamp mount.Make sure that it is locked in securely. 3.
4. Quickly remove Bluetooth headset ①Remove the headphone ②Remove the device from clamp(along the arrow direction in fingure) ③Remove the clamp from helmet(along the arrow direction in fingure) 5.Functions and operation of buttons 5.1 Turning on / off the unit On:Press the On/Off Button for 3 seconds until you hear a “Di”.The blue light will flash 3 times swiftly and then turn into regular intervals. Off:Press the On/Off Button for 5 seconds until you hear a “Di”.
5.2 Phone Controls ①To answer a call – Briefly press the Multi-function button once. ②Auto receive call – Dependant on the phone the unit will automatically answer the call after 15 seconds of ringing. ③To reject a call – Press the Multi-function button and hold until you hear a “Du” (around 3 seconds). ④To end a call – Whilst call is active Briefly press the Multi-function button once. ⑤Last number redial – When in standby mode. Press and hold the Multi-function button for 2 seconds until you hear a “Du”.
Warranty Service 合 格 证 Warranty Service: 2 years This card is a product warranty card, please keep it properly; Please attach a receipt to the warranty card to prove the date of purchase. Certificate Model: Inspector: Date of manufacture: Date of purchase: Customer Name: Customer Phone: Customer Address: Please fill in the product failure description so that we can deal with it in time.
5.3 Music Controls ①Play / Pause – Briefly press the Multi-function button once. ②Next Track – Turn the knob counterclockwise to select the next music. ③Previous Track – Turn the knob clockwise to go back to the previous music. 5.4 To Start FM radio ①After turn the unit on, double press the Multi-function button to start FM radio.When there is no call or intercom. ②Slowly turn the knob counterclockwise and clockwise to adjust the station.
5.6 To Adjust the Volume Rotate the knob counterclockwise and hold it down to increase the volume, rotate the knob clockwise and hold it down to decrease the volume, let go when the volume is adjusted to the right level, and you can hear a "thump" sound when you adjust the volume. Highest or lowest volume. Note: Depending on the phone some or all of these functions may not work, or operate differently. 5.
6.Pairing method 6.1 Pairing with mobile phone ①Ensure the Bluetooth intercom headset is off and within 1m visible range of the mobile phone to be paired. ②Press down device On/Off button for 8 seconds until you see the red light and blue light flash alternatively, it means device enter pairing status. ③Open the Bluetooth function on your mobile phone. ④Bluetooth on your phone will search the device until you see Hysnox .
Note: When 2 bluetooth devices need to pair for intercom, also need to connect mobile phone, you should following the instruction: a: Firstly, two bluetooth devices need to pair for intercom successfully,(see the above instruction), then turn off the two bluetooth devices. b: Turn on one of bluetooth devices, also turn on the mobile phone bluetooth, let the mobile phone connect the bluetooth device successfully.
7.Function priority Level 1: Phone Level 2: Bluetooth intercom Level 3: Music/FM radio 8.Technical parameters of product Working distance:1000 meters Frequency:2.4GHz Supports: A2DP and AVRCP Supported Bluetooth Profiles : Bluetooth headset and hands free profiles with automatic detection Operating Range: Up to 10m for cellphones Battery Type: Rechargeable lithium polymer 600mAh Stand by:Up to 300 hours Talking Time : Mobile phone talk/listen to music up to 14 hours; intercom up to 12 hours.
9.Battery and charging instructions Before using this device, Please charge the headset with charger. Please ensure that the battery is fully recharged when you first time use it.We have provided you with the ability to charge the system via the USB port of your computer or if you are away on a trip, you can use Multi-voltage USB power adapter.
10.
FCC Requirement Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.