SmartSYNCTM Torch RFID Module Operator Manual ENGLISH Original instructions March 2019 Hypertherm, Inc. Hanover, NH 03755 USA www.hypertherm.
Radio frequency identification (RFID) specifications The SmartSYNCTM RFID module (NFC 13.56MHz RFID transceiver module) contains the following components: A passive RFID tag A wireless radio transceiver on the printed circuit board (PCB) with an attached coil antennae: Operating frequency: 13.56 MHz Protocol: ISO/IEC 15693 Maximum range: 8 mm (0.32 inch) Maximum transmit power: 104 mW Hypertherm’s RFID protocol also includes data encryption for additional security over RFID alone.
SmartSYNC RFID/Communications Compliance 810590MU Revision 0 – June 2019 United States of America (English) FCC Notice for U.S. Customers Hypertherm SmartSYNC™ torches contain an RFID module that complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation.
SmartSYNC RFID/Communications Compliance Canada (English) Canada Regulatory Notice Industry Canada (IC) Statement: This device contains IC: 24739-SMARTSYNC. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference recieved, including interference that may cause undesired operation of the device.
SmartSYNC RFID/Communications Compliance Canada (French) Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1) L'appareil ne doit pas produire de brouillage, et 2) L'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.