User's Manual

ManualsBrandsHYPERPAY ManualsElectronicsHyperMate PRO Cryptocurrency Wallet

UserManual

FCCStatement

AnyChangesormodificationsnotexpresslyapprovedbythepartyresponsibleforcompliance

couldvoidtheuser’sauthoritytooperatetheequipment.

Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwo

conditions:

(1) Thisdevicemaynotcauseharmfulinterference,and

(2) Thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycause

undesiredoperation.

ThedevicehasbeenevaluatedtomeetgeneralRFexposurerequirment.Thedevicecanbeused

inportableexposureconditionwithoutrestriction.

Note:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigital

device,pursuanttopart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonable

protectionagainstharmfulinterferenceinaresidentialinstallation.Thisequipment

generates,usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedin

accordancewiththeinstructions,maycauseharmfulinterferencetoradiocommunications.

However,thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthis

equipmentdoescauseharmfulinterferencetoradioortelevisionreception,whichcanbe

determinedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrectthe

interferencebyoneormoreofthefollowingmeasures:

—Reorientorrelocatethereceivingantenna.

—Increasetheseparationbetweentheequipmentandreceiver.

—Connecttheequipmentintoanoutletonacircuitdifferentfr omthattowhichthereceiveris

connected.

—Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

Overview

ProductName:HyperMatePROCryptocurrencyWallet

Model:HyperMate H96

TradeMark:HyperMate

Manufacturer:FEITIANTechnologiesCo.,Ltd.

NPUT:5V0.2A

Connection:Bluetooth,USBtype‐C

INITIALIZEYOURWALLET

Beforeyougoonwiththefollowingsteps,pleasemakesureyouareinaprivateplacewithapen

andyourrecoveryphrasecard.

HyperMatePROCryptocurrencyWalletwillNOTenableBluetoothorUSBconnectionbeforethe

wallet initiation process is completed in order to guarantee that

 the initiation process is

completelyconductedinanofflineenvironment.

1Poweron

Summary of content (6 pages)

PAGE 1
User Manual FCC Statement Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
PAGE 2
Turn on your device by press and hold the power button for 2 seconds. Check the battery sign at the top right corner of the screen. If the battery level was below half, please charge your device with any 5V adapter. 2 Create a wallet Now you can see 2 options: Create a new wallet or restore an old wallet. Choose “Create new wallet” and click OK button to continue. 3 Set a PIN Set a PIN for your wallet. Note: Make sure your PIN is well memorized.
PAGE 3
6 Generate and ready Your wallet starts generating your wallet address from the recovery phrases. This process will take around 90 seconds. The device will notice you when your wallet is ready to use. RESTORE FROM YOUR PREVIOUS WALLET Before going on with the following steps, please make sure you are in a private place with a pen and your recovery phrases.
PAGE 4
Enter your recovery phrases Please get the BIP 39 recovery phrases card of your previous wallet ready and make sure your are in a safe environment. Choose the number of your recovery phrases from 12 or 24. And enter them carefully without letting other people peek at your screen or card. 5 Generate and ready JuBiter wallet starts generating your wallet address from the recovery phrases. This process will take around 30 seconds. JuBiter will notice you when your wallet is ready to use.
PAGE 5
Prepare your hardware wallet and the paired mobile device with mobile App. Launch the app and select the type of coin/token that you are willing to spend. Tap “Send” at the left bottom corner. Enter the beneficiary address, amount and tap “Next”. Choose a digging fee if needed and continue. 2. Enter Device PIN You will be asked to enter the PIN of your hardware wallet. The PIN pad lay‐out will be shown in your device. Enter the PIN blindly on your phone according to the lay‐out shown on your device. 3.
PAGE 6
code as an alternative.