Battery Safety Information: Insure that battery polarity is correct. Use only batteries of the type recommended (or equivalent), Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zing), or rechargeable (nickel-cadmium) batteries. Rechargeable batteries are to be removed from the product before being charged. Rechargeable batteries are to be recharged by Adult only. Remove used-up batteries immediately. Do not recharge non-rechargeable batteries. Do not short-circuit terminals.
Batteries and Instructions for charging (1) The remote control unit is equipped with two 1.5V AA non-rechargeable batteries (Battery need additional purchase). Battery loading: a) Loosen the screws on the battery door with cross screwdrivers. (Phillips screwdriver need additional purchase) b) Load the new 1.5V AA batteries corresponding the and in the battery case to the and of the batteries. c) Cover up the battery cover, and tighten the screws.
¢) Load the battery pack in the battery case by corresponding to the correct electrodes, and cover up the battery cover. (Phillips screwdriver need additional purchase) ) Battery Warning e Non-rechargeable batteries are not to be recharged. e Different types of batteries or new and used batteries are not to be mixed. e Batteries are to be inserted with the correct polarity. e Exhausted batteries are to be removed from the controller. e The supply terminals are not to be short-circuited.
@ ) Description of functions of remote controller Operation indicator light Left drifting of head Right drifting of head Move forward / Turn left / Move backward Turn right Drift front Lo or ara Drift right front at 45° Dance Execute Loudspeaker programming Drift left Enter program Drift right Drift right rear at 45° Right drifting of tail Drift left rear at 45° Left drifting of tail Body rise and fall Demonstration and description of functions Turn on the power: Turn the power switch of the remote control
1. Move forward / Move backward Push upwards/Pull backwards the left control lever, so the remote control car will move forwards/backwards; continually push upwards/pull backwards the left control lever, so the remote control car will continually move forwards/backwards. Move forward / Move backward 2.
4. Left drifting of head — When the "Left drifting of head" Left drifting of head key is pressed once, the head of the remote control car will drift left; when it is pressed and held, the head of the remote control car will drift left all the time. 5. Right drifting of head When the "Right drifting of head" key is pressed once, the head of the remote control car will drift right; when it is pressed and held, the head of the remote control car will drift right all the time. Right drifting of head 6.
. Right drifting of tail ) When the "Right drifting of tail | Right drifting of tail key is pressed once, the tail of the remote control car will drift right; when it is pressed and held, the tail of the remote control car will drift right all the time. 8. Drift front left at 45° ] When the "Drift front left Drift front left at 45° key is pressed once, the remote control car will drift at 45° front left; when it is pressed and held, the remote control car will drift front left at 45° all the time. 9.
10. Drift left rear at 45° When the "Drift left rear at 45° key is pressed once, the remote control car will drift at 45° left rear; when it is pressed and held, the remote control car will drift left rear at 45° all the time. 11. Drift right rear at 45° When the "Drift right rear at 45° " key is pressed once, the remote control car will drift at 45° right rear; when it is pressed and held, the remote control car will drift at 45° right rear all the time. 12.
13. Drift right — When the "Drift right" key is Drift right pressed once, the remote control car will drift right; when it is pressed and held, the remote control car will drift right all the time. aN RR ene RRR CRN HORROR RR DRESDEN CRS RNR eR RRR BORNE RRR ORR NR GRR GR RRR eee: ese mes Ree 14.
B) Solutions to problems Problem Cause Processing Method 1. Fail to put the battery | 1. Check and make sure that the battery into the right electrodes.| is put in according to the signs of the electrodes on the battery box. 2. Low battery. 2. Replace with new batteries. The remote — control fails | 3: Out of the controllable | 3. Keep the remote control within 30 meter Wy" distance. and point at the remote control car. 4. No pairing frequency 4. Unload the batteries and reload them.