Knape & Vogt insists on the Call Knape & Vogt at: 1-800-253-1561
MISSING A PART? There is no need to return this item to the store. Instead call our TOLL FREE HOTLINE. 1-800-253-1561 We appreciate your purchase of the HyLoft storage system. Knape & Vogt has made every effort to supply a quality product that insures a lifetime of trouble-free service.
Preparation and Safety Information IMPORTANT-READ THROUGH ENTIRE INSTRUCTIONS BEFORE BEGINNING INSTALLATION Safety: Read and understand the warning on your stepladder and make sure the ladder is in good working order. Examine all tools needed to insure they are in proper working order before starting. Power tools that are not internally grounded require power cords and extension cords with a ground prong. Always wear eye protection when drilling or installing parts.
ASSEMBLY INSTRUCTIONS 24" x 96" Ceiling Mounted Shelf Item # 00181 Joists 14" to 24" apart 28 32 4-Hex Bolts 5/16" x 2" (8mm x 50mm) 8-Lag Screws X 2 ½" ( mm x 63mm)
IMPORTANT-READ THROUGH ENTIRE INSTRUCTIONS BEFORE BEGINNING INSTALLATION Locate the ceiling joists in the area of desired installation and determine the direction in which they are running. The ceiling Angle Brackets(B) are installed parallel to the ceiling joists. Refer to the diagram below for additional installation clarification.
24" 24" Ensure that 24" support frames are tight against the 96" support frames and tighten bolts in each corner of support frames using 1/4" Hex Bolts(M) & Nuts(N) with a 7/16" wrench or nut driver. Fasten Wire Grids(A) as shown using 4 Hex Bolts(I) & Hex Nuts(J) for each grid end.
24" x 96" Ceiling Mounted Shelf After installing Angle Bracket(B) to joists (step 1), attach Downrod(C) to Angle Bracket(B). Depending on your ceiling angle, you may need to cut the corner from Downrod(C) to allow it to hang down in the vertical position. Knape & Vogt® Grand Rapids, MI 49505 USA For more information and frequently asked questions, visit the Hyloft web site: www.Hyloft.