Knape & Vogt insists on the Call Knape & Vogt at: 1-800-253-1561
MISSING A PART? There is no need to return this item to the store. Instead call our TOLL FREE HOTLINE. 1-800-253-1561 We appreciate your purchase of the HyLoft storage system. Knape & Vogt has made every effort to supply a quality product that insures a lifetime of trouble-free service. In the event that you have any type of problems and BEFORE RETURNING THE UNIT TO THE SELLER, please call our toll free number 1-800-253-1561 .
Preparation and Safety Information IMPORTANT-READ THROUGH ENTIRE INSTRUCTIONS BEFORE BEGINNING INSTALLATION Safety: Read and understand the warning on your stepladder and make sure the ladder is in good working order. Examine all tools needed to insure they are in proper working order before starting. Power tools that are not internally grounded require power cords and extension cords with a ground prong. Always wear eye protection when drilling or installing parts.
ASSEMBLY INSTRUCTIONS SuperPro 48" X 96" Ceiling Mounted Shelf Item # 00164 Joists 24" to 42" apart O M Parts Included: IMPORTANT-Read through entire instructions before beginning any installation.
IMPORTANT-READ THROUGH ENTIRE INSTRUCTIONS BEFORE BEGINNING INSTALLATION Locate the ceiling joists in the area of desired installation and determine the direction in which they are running. The ceiling Angle Brackets(B) are installed parallel to the ceiling joists. Refer to the diagram below for additional installation clarification.
ATTACH SUPPORT FRAMES M M Place two 48" Support Frames(F) on top of feet and using Clamps(K) with thick part up, fasten to downrod using Hex Bolts(L) and Nuts(J). Make sure ends of Support Frames(F) are even and square. Place 96" Support Frames(G) on top of 48" Support Frames (F) and loosely bolt together in each corner using ΒΌ" Hex Bolts(M) and Nuts(N) using a 7/16" wrench or nut driver. Do not tighten until after placing grids.
SuperPro 48" X 96" Ceiling Mounted Shelf Item # 00164 ALTERNATE INSTALLATIONS Multi-Directional Joists: If joists change direction, 2 or all 4 Downrods (C&E) can be installed on the 96" side. Rotate direction of Angle Brackets (B) and Downrods (C&E) & install as shown in steps 1-3 of original instructions.