C20 Smart Charger User Manual
C20 Smart Charger User Manual Shanghai HYCO Genyong Technology Co., Ltd. Disclaimer Please read all the contents of the manual carefully before using the products described in this manual to ensure the safe and effective use of the product. Please keep this manual in a safe place for future use. Do not disassemble the terminal by yourself or tear up the seal on the terminal. Otherwise, Shanghai HYCO Genyong Technology Co., Ltd. will not be responsible for the warranty or replacement of the terminal.
C20 Smart Charger User Manual Appearance C20 charger Ring scanner charging groove Indicator light Micro USB charging port Barcode for disconnect bluetooth
C20 Smart Charger User Manual User manual Ring scanner Indicator light C20 charger Barcode for disconnect bluetooth USB cable Ring scanner Push the ring strap to the bottom of the slot Charging Contact Ring strap
C20 Smart Charger User Manual How to charge: 1. 2. 3. 4. 5. Connect the adapter with C20 charger, and connect the adapter to power. When it is not in charging, the indicator light on the charger keeps green. Put the ring scanner into the bottom of each charging slot with the scan window upward. Please note the power contacts between the ring and cradle must be touched, and the ring strap must be pushed to the end of slot. When the indicator light turns red, it indicates the ring scanner is in charging.
C20 Smart Charger User Manual Specifications L*W*H（MM） 266.5*151.4*36.7 Weight（KG） 1.02 Working temperature -10°C~50°C Charging grooves 10 Pcs quantity Bluetooth BT4.2, BLE Charging port Micro USB Machine electrical Rated input voltage：5V parameters Rated input current：2A Charging indicator In charging: static red light Charging finished: static green Notice 1. Check the ground connection safety before using. 2. Do not spray any liquid onto the charger. 3.
C20 Smart Charger User Manual FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
C20 Smart Charger User Manual Manufacturer's Name: Shanghai Hyco Genyong Technology Co., Ltd. Sample Description: Smart Charger Trade Mark: HYCO Model number: C20 Operating Temperature: ‐10° C to 35° C This product is a fixed location. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the device, including the antenna. Use only the supplied or an approved antenna.
