UL NE BIO ee gy Eyepieces BE. Finder Scope C. Telescope Robe D. Objective Leas E. Diagonal Mirror F. Focus Knob G. Tripod Interface H.Compass L Protective Cover J. Finder Scope Bracket 1. Rubber Foot 2. Flip Lock Lever 3. Leg Tube 4. Accessory Tray 5. Tk Lock Handle 6.
= Please read this mammal carefully and completely lt contains the information you need to know to obtain the best results from your telescope. @ If at any Hme you need assistance in assembling or operating your telescope,you may contact us by e-mail, # All images snd product description are for reference only;actual fiction and detail based on the real product.
All three legs should be Find the screw heel on Fasten the screw under the muse length io the telescope plate, the tripos plate, make provide a level platform align it with the screw sure telescope is connector the telescope. an top of the tripos ed with the tripos tightly. plate. “ Assemble the finder Tighten the set screw Remove knurled finder slope. on the finder scope. scope moots from the apical tube, Place finders cops over screws as shown shove, Replace knurled nuts to secure in place.
Tighten the set screw to Place the eyepieces inch For additional magnification secure in place. the barrel of the son, place the barrow diagonal as shown lens between the focuses above. Tighten the set and the eyepiece, and resew to secure in tighten all sot sorrows. place. 18 : Remove the objective Make sure marking line lens cover before am the diagonal mirror Rotate the eyepiece of ihe finder scope to adjust observation. is aligned with the red the focus. dot.
LUI e i IPB O86 # Since the telescope has a Hated field of view, it can be difficult to locate a given star or planet. For this reason the telescopes is fitted with a finder scope for orientation, which serves as a 5x24 monocular with positive view.