Installation Instructions

ManualsBrandsHUSUKU ManualsElectronicsRGB Boat Light

1 / 6

Controller Introduction

MINI series wireless-sync-control led controller for light with RFBK remote

Controller adopts the most advanced PWM (Pulse Width Modulation) digital control technology, it is used

for controlling constant voltage LED lamps. For instance, point source of light, flexible light strip, led

modules, led strings and so on; Receiver items are for RGB , remote control adapts RFBK remote the

same one for all types, and available for mixed control.

Basic Operation Introduction

(Button Functions On The Third Page)

1. Code clearing: within 1 minute of turning on the light, press and hold "OFF" for 5 seconds, the indicator

light flashes quickly, and code clearing begins. (Automatically exit after 60 seconds or press any

button to exit) (The coded lights can only be coded again after clearing the code)

2. Code pairing: within 1 minute of turning on the light, press and hold "ON" for 5 seconds, the indicator

light flashes quickly, and code pairing starts. After the indicator light flashes 3 times, it returns to the

initial state, indicating that the code matching is successful.

3. Within 1 minute: The light can only be coded and cleared within 1 minute after it is turned on. It is more

stable to prevent interference from other remote controllers later. Uncoded lights can be controlled by

all remote controls, and paired remote controls can only be controlled by the corresponding remote

control.

4. Grouping: "Zone" can divide multiple lights into different groups when pairing codes, and control the

codes separately. The Zone indicator light is on to indicate the currently controlled group. After a long

press for 2 seconds, the Zone indicator lights up, indicating that all groups are selected for unified

control.

5. Dynamic mode: "Mode" selects 8 dynamic modes of lighting. At this time, you can only adjust the

speed but not the brightness.

6. "Color ring" adopts new touch technology, which can be touched into corresponding colors.

7. Static mode: "White hot key" selects the static mode of white light, "-" and "+" are used to select 6

different colors. You can also touch the "Color ring" to directly change to the corresponding color.

8. Brightness and speed: "B-" and "B+" can adjust the brightness of the light in static mode, and "S-" and

"S+" are used to adjust the speed of light change in dynamic mode.

9. Transmission and synchronization: The measured control distance of the remote control is 20m. The

measured distance of signal transmission between lamp and lamp is 10m. In dynamic mode, if the

light changes are not the same, the lights within 10m of each other will transmit and receive signals.

Generally, it can be fully synchronized within ten seconds.

Attention: Due to the complexity of the installation environment, in order to get a better control effect, we

recommend that the distance between the remote control and the light should not exceed 10m, and the

distance between the lamp and the lamp should not exceed 2m. At the same time, in addition to the three

buttons "OFF", "ON", and "Zone", please press and hold the other buttons to emit continuous signals to

prevent some lights from not receiving signals in time and affecting the control effect.

If you have any questions, please contact us immediately and we will send professional people to solve

your problem in time. Please rest assured~

Summary of content (7 pages)

PAGE 1
Controller Introduction MINI series wireless-sync-control led controller for light with RFBK remote Controller adopts the most advanced PWM (Pulse Width Modulation) digital control technology, it is used for controlling constant voltage LED lamps. For instance, point source of light, flexible light strip, led modules, led strings and so on; Receiver items are for RGB , remote control adapts RFBK remote the same one for all types, and available for mixed control.
PAGE 2
Detailed Introduction 1、Product Features            Designed for RGB constant voltage LED lights. DC12-24V, output current: 3chs*2A. Adopts RF remote control, no need line-of-sight. 4 zones separately control or all-control. Wireless-sync-control in both static color and dynamic modes, unlimited by remote control distance. Batch-operation is available for RF code matching/clearing between remote control and receivers.
PAGE 3
4、RF remote button functions 1 color ring and 12 buttons in total, the function of buttons are shown as below: 3/6
PAGE 4
Name Description Nonfunctional Turn on Turn off Color ring Static color options, 64 colors in total. Dynamic modes, 8 modes in total. White color hot key 6 static colors (cyan, purple, yellow, blue, green, red) 6 static colors ( red, green, blue, yellow, purple, cyan) Brightness – for static colors by 1024 levels. Long-press can get fast adjusting. Brightness + for static colors by 1024 levels. Long-press can get fast adjusting. Speed down for dynamic mode (100 levels). Long-press can get fast adjusting.
PAGE 5
（1）Code pairing operation: means that the receiver will only be controlled by the value code remote controller. Step Operation Instructions 1.It is necessary to clear the code first, if the receiver 1 Connecting the load to the receiver and power on it. was coded before. 2.Batch operation can be performed within the remote control range.
PAGE 6
(4) Copying code from receiver to remote control. A new remote control can also copy code from any one of the receivers in the whole system, after the successful operation, the new remote control can replace the original remote (if it is lost). Step 1 Operation Cut off the power of receiver. 2 Long-press "mode key" for 5 seconds, the remote indicator light changes from 100% light to off, means entering the code value receiving state.
PAGE 7
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.