User Guide

Not for
Reproduction
 Rev. A
7-in-1 Nozzle
Spray Wand
Spray Gun
Engine Switch
Recoil Starter
Fuel Cap
High Pressure
Hose
Oil Fill/Dipstick
High Pressure
Outlet
Water Inlet
Choke Lever

Place Outdoors
Start Up
1
Working CO Alarms
2
Add Oil and Fuel
3
Lubricate O-Rings
4
Connect Hose
5
Connect Garden Hose
6
Purge System
7
Connect Spray Tip
and Wand to Gun
8
Switch On (I)
9
Shutdown

1
Purge System
3
Run
13

2
Choke
11
Fuel On
10
Items Included:
QUICK START UP / SHUTDOWN GUIDE
WARNING! Risk of eye injury. Spray could splash
back or propel objects resulting in serious injury.
• Always wear indirect vented (chemical splash) safety
goggles when using or near this product.
• Always wear protective clothing such as long-sleeved shirts,
long pants and closed-toed shoes.
The quick start up/shutdown guide is not a substitute for
reading the manual; the manual contains detailed
information and instructions that you must be aware of and
follow in order to maintain the equipment properly and use it
safely. Remember to record the date of purchase and model number in
your manual.
Assemble Handle
Copyright © 2021. All rights reserved. Husqvarna® is a registered trademark
of Husqvarna AB, used under license. No part of this material may be
reproduced or transmitted in any form without the express written permission of
Briggs & Stratton.
Every effort has been made to ensure that the information in this document
is accurate and correct. However, we reserve the right to alter or otherwise
improve the product and this document at any time without prior notice and
without incurring obligation.
[phone]
www.husqvarna.com/us

Pull Recoil (2X Only)
12
Outdoor
Use Only
If engine
fails to start,
proceed
to step 13,
then repeat
step 12.
Items needed:
(not included)
• Grease
• Garden hose, 50 ft. (15 m)
or less
• Safety goggles (indirect
vented type)