H1153190-95US.fm Page 1 Tuesday, December 15, 2009 9:05 AM WARNING The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive WARNING Before using our products, please read this manual carefully to understand the proper use of your unit.
H1153190-95US.fm Page 2 Tuesday, December 15, 2009 9:05 AM English FEDERAL EMISSION CONTROL WARRANTY STATEMENT YOUR WARRANTY RIGHTS AND OBLIGATIONS The EPA (The US Environmental Protection Agency), CARB (California Air Resources Board), Environment Canada and Husqvarna Forest & Garden are pleased to explain the emissions control system warranty on your 2007 and later small nonroad engine. In U.S.
H1153190-95US.fm Page 3 Tuesday, December 15, 2009 9:05 AM English Contents Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 SAFETY FIRST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Notes on types of warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Warning labels on the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Symbols . . . . . . . . . . . . . . . . . . . . . . . . .
H1153190-95US.fm Page 4 Tuesday, December 15, 2009 9:05 AM English Safety Notes on types of warnings SAFETY FIRST Instructions contained in warnings within this manual and warning seals marked with a symbol on the blower concern critical points which must be taken into consideration to prevent possible serious bodily injury, and for this reason you are requested to read all such instructions carefully and follow them without fail.
H1153190-95US.fm Page 5 Tuesday, December 15, 2009 9:05 AM English Symbols on the machine (a) (c) (b) (d) For safe operation and maintenance, symbols are carved in relief on the machine. Using to these indications, please be careful not to make a mistake.
H1153190-95US.fm Page 6 Tuesday, December 15, 2009 9:05 AM English Safety Precautions 1. Refrain from operating the blower if you are tired, ill, or upset, or if you are under the influence of alcohol, drugs or medication 2. To reduce the risk of hearing loss associated with sound levels, hearing protection is required. 3. To reduce the risk of injury associated with thrown objects, always wear eye protection and foot protection. Approved protective goggles must comply with standard ANSI Z87.
H1153190-95US.fm Page 7 Tuesday, December 15, 2009 9:05 AM English Safety Precautions BEFORE STARTING THE ENGINE Each time before starting the engine, inspect the entire unit to see if every part is in good order and is securely tightened in place. If any damage is found in the fuel line, the exhaust line, or the ignition wiring, do not use the blower until it has been repaired. IMPORTANT Before starting operation, always make sure to check if any obstacles are left inside the volute case and net.
H1153190-95US.fm Page 8 Tuesday, December 15, 2009 9:05 AM English Safety Precautions MAINTENANCE TRANSPORTATION 1. In order to maintain your product in proper working order, perform the maintenance and checking operations described in the manual at regular intervals. 2. Always be sure to turn off the engine and disconnect the spark plug before performing any maintenance or checking procedures. - Drain the fuel from the fuel tank before transporting or storing the blower.
H1153190-95US.fm Page 9 Tuesday, December 15, 2009 9:05 AM English What is what? <130BT> 1 2 11 3 15 16 22 4 7 20 28 27 26 17 18 8 9 24 14 21 25 12 19 23 13 5 6 25 30 29 10 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Frame Harness Engine Cover Volute Case, Cover Net Fan Air Cleaner Recoil Starter Fuel Tank Pad Spark Plug Cap Shock Absorber (Spring) Band (stopper) Shock Absorber (Rubber) Choke Lever ■ DISPOSAL 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30.
H1153190-95US.fm Page 10 Tuesday, December 15, 2009 9:05 AM English What is what? <350BT/BF> 1 2 11 3 15 21 4 14 27 16 19 7 17 25 26 8 9 22 13 23 24 <350BT> 20 29 12 28 18 5 17 30 6 <350BF> 10 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Frame Harness Engine Cover Volute Case, Cover Net Fan Air Cleaner Recoil Starter Fuel Tank Pad Spark Plug Cap Shock Absorber (Rubber) Shock Absorber (Rubber) Choke Lever Control handle ■ DISPOSAL 16. 17. 18. 19. 20. 21. 22. 23. 24.
H1153190-95US.fm Page 11 Tuesday, December 15, 2009 9:05 AM English What is what? <370BTS/BFS> 3 27 15 16 21 19 17 25 26 9 29 22 13 8 <370BTS> 28 1 2 23 24 18 20 12 7 11 5 4 17 30 6 14 <370BFS> 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Frame Harness Engine Cover Volute Case, Cover Net Fan Air Cleaner Recoil Starter Fuel Tank Pad Spark Plug Cap Shock Absorber (Rubber) Shock Absorber (Rubber) Choke Lever Control handle ■ DISPOSAL 10 16. 17 18. 19. 20. 21. 22. 23. 24.
H1153190-95US.fm Page 12 Tuesday, December 15, 2009 9:05 AM English What is what? <380BTS/BFS> 2 1 27 3 15 21 25 19 26 28 16 17 8 9 18 20 <380BTS> 23 22 13 24 29 7 30 17 12 11 5 6 4 14 10 <380BFS> 1. Frame 2. Harness 3. Engine Cover 4. Volute Case, Cover 5. Net 6. Fan 7. Air Cleaner 8. Recoil Starter 9. Fuel Tank 10. Pad 11. Spark Plug Cap 12. Shock Absorber (Rubber) 13. Shock Absorber (Rubber) 14. Choke Lever 15. Control handle ■ 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27.
H1153190-95US.fm Page 13 Tuesday, December 15, 2009 9:05 AM English Technical data MODEL 130BT 350BT 350BF 370BTS 370BFS 380BTS 380BFS Dimensions (L x W x H) mm (in) 295x387x432 (11.6x15.2x17) 351x446x479 (13.8x17.6x18) 351x487x479 (13.8x19.2x18) 365x464x485 (14x18x19) 365x496x485 (14x20x19) 410x509x497 (16.1x20x19.6) 410x550x497 (16.1x21.7x19.6) Dry Weight kg (lbs) (including pipe) 6.75 (14.9) 10.2 (22.5) 10.4 (22.9) 12 (26.5) 12.2 (26.9) 13.2 (29.1) 13.4 (29.
H1153190-95US.fm Page 14 Tuesday, December 15, 2009 9:05 AM English Assembly ■ FLEXIBLE HOSE AND SWIVEL JOINT 1. Connect the blower and swivel joint with flexible hose. Clamp both ends of the flexible hose securely with the hardware supplied with the unit. (1) Flexible hose (2) Swivel joint (3) Clamp (large) (4) Clamp (small) F1 (3) (1) NOTE (4) (2) A light lubricant may be used to ease assembly of flexible hose to blower elbow. ■ CONTROL HANDLE [130BT/350BT/370BTS/380BTS] 1.
H1153190-95US.fm Page 15 Tuesday, December 15, 2009 9:05 AM English Assembly ■ BLOW PIPES Conect the swivel joint, straight pipe and pipe end. Push the pipes together and turn them so they lock in relation to one another until the connection is locked. F7 NOTE A light lubricant may be used to ease assembly of blower tube. NOTE If longer tube is required, the second straight pipe can be connected with the first one.
H1153190-95US.fm Page 16 Tuesday, December 15, 2009 9:05 AM English Fuel ■ FUEL WARNING - Gasoline is very flammable. Avoid smoking or bringing any flame or sparks near fuel. Make sure to stop the engine and allow it cool before refueling the unit. Select outdoor bare ground for fueling and move at least 10ft (3m) away from the fueling point before starting the engine. - The engines are lubricated by oil specially formulated for air-cooled 2-cycle gasoline engine use.
H1153190-95US.fm Page 17 Tuesday, December 15, 2009 9:05 AM English Operation ■ CONTROL ARM [350BF/370BFS/380BFS] - Hold the upper end of the control arm in hand and, while pulling it away from the unit, rotate arm forward (counter-clockwise in the direction of the arrow) until it clicks. (The first position) And if you want, you can rotate arm further until it clicks. (The second position) Choose the arm position according to your working condition.
H1153190-95US.fm Page 18 Tuesday, December 15, 2009 9:05 AM English Operation ■ ADJUSTING IDLE SPEED [130BT] - The idling speed is set for 3000 rpm at the factory. If it is necessary to adjust the idle speed, use the adjustment screw on the top side of carburetor. F22 (1) (1)Idling Adjustment Screw [130BT] [350BT/BF] [350BT/BF] [370BTS/BFS] [380BTS/BFS] - The idling speed is set for 2200 rpm [350BT/BF] or 2000 rpm [370BTS/BFS] [380BTS/BFS] at the factory.
H1153190-95US.fm Page 19 Tuesday, December 15, 2009 9:05 AM English Maintenance Maintenance, replacement, or repair of the emission control device and systems may be performed by any non-road engine repair establishment or individual.
H1153190-95US.fm Page 20 Tuesday, December 15, 2009 9:05 AM English Maintenance [370BTS/BFS] [380BTS/BFS] (F31) 1. Unscrew 2 knob bolts and remove the air cleaner cover. Then remove the prefilter mounted inside the air cleaner cover. (1)Knob Bolt(2) Prefilter (3)Inner Case [380BTS/BFS](4) Paper Filter 2. Wash the prefilter in fresh, non flammable cleaning solution (ex. warm soapy water) and then dry. (Clean the air filter once in a week.) 3.
H1153190-95US.fm Page 21 Tuesday, December 15, 2009 9:05 AM English Maintenance ■ COOLING SYSTEM - To keep the working temperature as low as possible the machine is equipped with a cooling system. (1) Cooling fins on the cylinder. Clean the cooling system with a brush once a week, more often in demanding conditions. A dirty or blocked cooling system results in the machine overheating which causes damage to the piston and cylinder.