Owner's Manual ® sqva OTARY LAWN MOWER 550 Series Briggs & Stratton Engine 21" Multi-Cut Model No. 917.384540 • EspaSol, p. 20 CAUTION'. Read and follow all Safety Rules and Instructions before operating this equipment Husqvarna, Charlotte, NC 28269 Visit our website: www.husqvarna.com U.S.A.
Safety Rules .......................................... 2-3 Warranty ................................................ 4-7 Product Specifications .............................. 8 Assembly / Pre-Operation ........................ 9 Operation ........................................... 10-13 Maintenance Schedule ........................... 14 Maintenance ...................................... 14-16 Service and Adjustments ........................ 17 Storage ..............................................
DO: • Mow across the face of slopes: never up and down. Exercise extreme caution when changing direction on slopes. • Remove obstacles such as rocks, tree limbs, etc. • Watch for holes, ruts, or bumps. Tall grass can hide obstacles. DO NOT: * * • Do not trim near drop-offs, ditches or embankments. The operator could lose footing or balance. • Do not trim excessively steep slopes. • Do not mow on wet grass. Reduced footing could cause slipping. * * III.
Husqvarna Consumer Wheeled Products - Limited Warrant_ Husqvarna warrants to the original retail purchaser that this Husqvarna,_R_ ' product is free from defects in material or workmanshil_ under normal use and maintenance from the date of retail purchase for the applicable Warranty Period shown on Exhibit A. This Limited Warranty may not be transferred to any subsequent prochaser of this Husqvarna,_R_ ' product. Certain components (e.g.
Husqvarna 7. Owner's (Your) Responsibilities. To preserve your rights under this Limited Warranty, you must exercise reasonable care and use of the product, including, following the preventative maintenance, storage, fuel and oil usages as prescribed in the enclosed operator's manual. For example, the following items are the Owner's responsibility and are not covered by this Limited Warranty: a. Set-up and pre-delivery service, and engine tune-ups; b.
Husqvama Consumer Wheeled Limited Consumer household Product/Component Warranty (personal, use only) ........................................ IFrame, Chassis, Front Axle Chart 2012 Exhibit A Commercial (any commercial, Rental (any orofessional, institutional, agricultural, or rental usage) income producing use, other than Rent@! U_e/ ..................................
Husqvarna Consumer Wheeled Limited Warranty Chart 2012 Consumer household (personal, use only) Product/Component Accessories accessories, (e.g., grass catcher, bumper guard etc. Replacement parts and/or accessories provided under this Limited Warranty are warranted only for the BALANCE of the warranty period applicable to the part or accessory that was replaced.
Serial Number: Date of Purchase: Gasoline Capacity / Type: 1.0 Quarts (Unleaded Regular) Oil Capacity: 16 Ounces Oil Type (API SG-SL): SAE 30 (above 32°F); SAE 5W-30 (below 32°F) Spark Plug: Champion Blade Bolt Torque: 35-40 ft. Ibs. RC12YC (Gap: .030") • The model and serial numbers will be found on a decal on the rear of the lawn mower housing. Record both serial number and date of purchase in space provided above. These accessories were available when this lawn mower was produced.
Read these instructions and this manual in its entirety before you attempt to assemble or operate your new lawn mower, IMPORTANT: This lawn mower is shipped WITHOUT OIL OR GASOLINE in the engine. Your new lawn mower has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your lawn mower, all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure proper tightness.
KNOW YOUR LAWN MOWER READ THIS OWNER'S MANUAL AND ALL SAFETY RULES BEFORE OPERATING YOUR LAWN MOWER. Compare the illustrations with your lawn mower to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. These symbols may appear on your lawn mower product. Learn and understand their meaning.
The operation of any lawn SAFETY GLASSES mower can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your lawn mower or performing any adjustments or repairs. We recommend a standard safety glasses or wide vision safety mask worn over spectacles. • To convert to mulching or discharging operation, remove grass catcher and close rear door. Pivot pins ......... .....
IMPORTANT: • Check oil level before each use. Add oil if needed. Fill to full line on dipstick. • Change the oil after every 25 hours of operation or each season. You may need to change the oil more often under dusty, dirty conditions. See "TO CHANGE ENGINE OIL" in the Maintenance section of this manual. ADD GASOLINE • Fill fuel tank to bottom of tank filler neck. Do not overfill. Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane. Do not mix oil with gasoline.
TO STOP MULCHING ENGINE • To stop engine, release operator presence control bar. TO START MOWING TiPS IMPORTANT: For best performance, keep mower housing free of built-up grass and trash. See "CLEANING" in the Maintenance section of this manual. ENGINE • The special mulching blade will recut the grass clippings many times and reduce them in size so that as they fall onto the lawn they will disperse into the grass and not be noticed.
MAINTENANCE SCHEDULE EVERY BEFORE A FTEREVERY EACH EACH 10 25 HOURS OR SEASON USE USE HOURS EVERY 100 HOURS BEFORE STORAGE m Check for Loose Fasteners _ Clean / Inspect Grass Catcher * Check Tires _ Check Drive Wheels Clean Lawn Mower ....
LAWN MOWER Always observe safety rules when performing any maintenance. TIRES • Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber. • Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage. BLADE CARE IMPORTANT: Blade bolt is heat treated. If bolt needs replacing, replace only with approved bolt shown in the Repair Parts section of this manual.
Check the crankcase oil level before starting the engine and after each five (5) hours of continuous use. Tighten oil plug securely each time you check the oil level. TO CHANGE ENGINE OIL NOTE: Before tipping lawn mower to drain oil, empty fuel tank by running engine until fuel tank is empty. 1. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. 2. Remove engine oil cap; lay aside on a clean surface. 3.
,_ WARNING" To avoid serious injury, before performing any service and adjustments: 1. Releasecontrol bar and stop engine. 2. Make sure the blade and all moving parts have completely stopped. 3. Disconnectspark plug wire from spark plug and place wire where it cannot come in contact with plug. LAWN Mowing position Mowing position / f_ II II I i <" Hairpin ___ _Handle Mounting.,1 _ pin MOWER r-'q ,, ....
Immediately prepare your lawn mower for storage at the end of the season or if the unit will not be used for 30 days or more. Operator MOWING POSITION control bar LAWN MOWER When lawn mower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area. 1. Clean entire lawn mower (See "CLEANING" in the Maintenance section of this manual). 2. Lubricate as shown in the Maintenance section of this manual. 3.
ENGINE OIL • Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems. • If possible, store your unit indoors and cover it to protect it from dust and dirt. • Cover your unit with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe, which allows condensation to form and will cause your unit to rust. IMPORTANT: Never cover mower while engine and exhaust areas are still warm.
TROUBLESHOOTING - See appropriate section in manual to a Husqvarna or other qualified Service Center. PROBLEM Loss of power . 3. 4. 5. 6. Poor cut = uneven CORRECTION CAUSE . Rear of lawn mower housing or cutting blade dragging in heavy grass. Cutting too much grass. Dirty air filter. Buildup of grass, leaves, and trash under mower. Too much oil in engine. Walking speed too fast. 1. Worn, bent or loose blade. 2. Wheel heights uneven. 3. Buildup of grass, leaves and trash under mower. Excessive .
Mantenimiento .......................................... 33-35 Servicio y Adjustes ........................................ 36 AImacenamiento ....................................... 37-38 Reglas de Seguridad ................................ 21-22 Garanfia .................................................... 23-26 Especificaciones del Producto ....................... 27 Montaje / Pre-Operaci6n ............................... 28 Operaci6n .................................................
HACER: • Puede recortar a trav_s de la superficie de la cuesta, nunca hacia arriba y hacia abajo. Proceda con extrema precauci6n cuando cambie de direcci6n en las cuestas. • Renueva todos los objetos extrahos, tales como guijarros, ramas, etc. • Debe prestar atenci6n a hoyos, baches o protuberancias. Recuerde que la hierba alta puede esconder obst_.culos. NO HACER: • No recorte cerca de pendientes, zanjas o terraplenes. El operador puede perder la tracci6n en los pies o el equilibrio.
Husqvarna Productos con ruedas para consumidor - Garantia limitada Husqvarna garantiza al comprador minorista original que este producto Husqvarna(R) carece de defectos materiales o de fabricacidn con un uso y mantenimiento normales desde el dia de la compra, dentro del periodo de garantia aplicable indicado en el Anexo A.
Husqvarna 5. Cualquier uso COMERCIAL, INSTITUCIONAL, AGRJCOLA, INDUSTRIAL, QUE PRODUZCA INGRESOS o DE ALQUILER tendril como resultado la p6rdida de garantia o un periodo de garantia menor.
Husqvarna COMO OBTENER SERVICIO 10. Centro/concesionario de servicio Husqvarna autorizado. Para obtener cobertura de garantia, es su responsabilidad (a su costo y cargo) entregar o enviar su unidad Husqvarna a un centro/concesionario de servicio Husqvarna autorizado y organizar la recogida o la devolucidn de su unidad despuds de clue se hayan realizado las reparaciones. Si desconoce la ubicacidn del concesionario de servicio Husqvarna autorizado mils cercano, llame a Husqvarna al 1-800-487-5951 de 8:00 a.
Husqvama Tabla de garantia limitada de 2012 para productos Consumidor (personal, solo para uso domestico) de consumo con ruedas AnexoA Comercial (cualquier uso comercial, profesional, institueional, agricola o que genere ingresos, que no sea Alquiler (cualquier uso para alquiler) Sin garantia Sin garantia Sin garantia Sin garantia 2 a5os 2 a_os 2 aSos 2 aSos Sin garantia Sin garantia Producto/Componente Modelo 5525PW: Motor* * Bomba Otros componentes perecederos Todas las otras hidrolavad
N0mero de Serie: Fecha de Compra: Capacidad y Tipo de Gasolina: Tipo de Aceite Capacidad (API SG-SL): Torsi6n del Perno (Regular SAE 30 (Sobre de Aceite: Bujia (Abertura: 1 Cuarto sin PIomo) 32°F); SAE 10W-30 (Debajo 32°F) 16 Onzas .030") Champion de la Cuchilla: 35-40 RC12YC ft. Ibs. • El n0mero del nodelo y el de serie se encuentran en la calcomania adjunta a la parte trasera de la caja de la segadora.
Lea estas instrucciones y este manual completamente antes de tratar de montar u operar su segadora nueva. IMPORTANTE: Este cortac_sped viene SIN ACEITE O GASOLINA en el motor. Barra de que sxige la presencia det operador ///J Su segadora nueva ha sido montada en la f_.brica con la excepci6n de aquellas partes que se dejaron sin montar por razones de env[o. Todas las partes como las tuercas, las arandelas, los pernos, etc.
FAMILIARICESE CON SU SEGADORA LEA ESTE MANUAL DEL DUENO Y LAS REGLAS DE SEGURIDADANTES DE OPARAR SU SEGADORA. Compare las ilustraciones con su segadora para familiarizarse con la ubicaci6n de los diversos controles y ajustes. Guarde este manual para referencia en el futuro. Estos simbolos pueden apareser producto. Aprenda y comprenda ATTENCION O ADVERTENClA MOTOR ENCENDIDO MOTOR APAGADO sobre su segadora sus significados.
La operaci6n de cualquier segadora puede hacer que salten objetos extrahos dentro de sus ojos, Io que puede producir dahos graves en 6stos. Siempre use anteojos de seguridad o protecci6n para los ojos mientras opere su segadora o cuando haga ajustes o reparaciones. Recomendamos gafas o una mascara de seguridad de visi6n amplia de seguridad usada sobre las gafas. COMO USAR SU SEGADORA VELOCIDAD DEL MOTOR La velocidad del motor se estableci6 en la fb.brica para un rendimiento 6ptimo.
PASOS SIMPLES DE RECORDAR CUANDO CONViERTA SU SEGADORA PARA ACOLCHAMIENTO 1. 2. TRASERO - La plancha acolchadora trasera removida. Recogedor del c6sped instalado. La protecci6n contra la descarga cerrada. PARA DESCARGA 1. 2. - La plancha acolchadora trasera instalada. La protecci6n contra la descarga cerrada. PARA ENSACAMIENTO 1. 2. 3. en el motor de la prueba de calidad de 100% del fabricante. AI cambiar el aceite puede necesitar 20 onzas. 4. Inserte y apriete la varilla medidora de aceite.
PARA PARAR EL MOTOR • Para parar el motor, suelte la barra de controles que exigen la presencia del operador. PARA HACER ARRANCAR CONSEJOS PARA SEGAR Y ACOLCHAR IMPORTANTE: Para obtener el mejor rendimiento mantenga la caja de la segadora sin acumulacion de cesped y basura. Vea "LIMPIEZA" en la seccion de Mantenimento de este manual. EL MOTOR AVISO: Debido alas capas protectoras del motor, una cantidad pequeha de humo puede estar presente durante el uso inicial del producto y se debe considerar normal.
PROGRAMA DE MANTEN|M| NTO Revisar si hay Sujetadores S Limpiar/Inspeccionar ANTES DESPUES CADA CADA CADA ANTES DEL DE CADA DE CADA 10 25 HORAS O 100 ALMACEUSO USO HORAS TEMPORADA HORAS NAMIENTO Sueltos el Recogedor * E Controlar los Neumaticos G Controlar las Ruedas A Limpiar la Segadora [_ Limpiar debajo la Cubierta de la Transmisidn *** O Revisar las Correas y las Poleas Impulsadas *** R Revisar / Afilar / Cambiar j_ Motrices v' v' v' v' *** ....
SEGADORA Siempre observe las reglas de seguridad cuando haga el mantenimiento. LLANTAS • Mantenga las Ilantas sin gasolina, aceite o substancias qu[micas para control de insectos que pueden daflar la goma. • Evite los tocones, las piedras, las grietas profundas, los objetos afilados y otros peligros que pueden daflar alas Ilantas. CUIDADO DE LA CUCHILLA Para obtener los mejores resultados, la cuchilla de la segadora tienen que mantenerse afilada. Cambie la cuchilla doblada o daflada.
PARACAMBIARELACEITEDELMOTOR AVlSO:Antesdeinclinarla segadoraparadrenat el aceite,dreneel tanquedecombustible haciendocotterel motorhastaqueel tanque est6vacio. 1. Desconecte el alambrede labujiay p6ngalode modoqueno puedaentraren contactocon_sta. 2. Remuevalatapadeldep6sitodelaceite; d_jelaa unladoen unasuperficielimpia. 3. Inclinela cortadorade c6spedpoteste costadotal comose muestray purgueel aceiteenun recipienteid6neo.Muevala segadorade atr_.
_ADVERTENClA: Para evitar lesi6nes serias, antes de dar calquier servico o de hacer ajustes: 1. Suelte la barra de control y pare el motor. 2. AsegOrese que la cuchilla y que todas las partes movibles se hayan detenido completamente. 3. Desconecte el alambre de la bujfa y p6ngalo en donde no pueda entrar en contacto con 6sta.
Barra de control que exige presencia det operador Inmediatamente prepare su segadora para el almacenamiento al final de cada temporada o si la unidad no se va a usar pot 30 d[as o m_.s. SEGADORA Cuando se va a guardar la segadora pot cierto perfodo de tiempo, Ifmpiela cuidadosamente, remueva toda la mugre, la grasa, las hojas, etc. Gu_.rdela en un Area limpia y seca. 1. Limpie toda la segadora (Vea "LIMPIEZA" en la secci6n de Mantenimento de este manual). 2.
ACEITE DEL MOTOR Drene el aceite (con el motor caliente) y cb.mbielo con aceite de motor limpio. (Vea "MOTOR" en la secci6n de Mantenimento de este manual.) ClLINDRO 1. Remuevala bujfa. 2. Vade una onza (29 ml) de aceite a tray,s del agujero de la bujfa en el cilindro. 3. Tire la manilla de arranque lentamente unas cuantas veces para distribuir el aceite. 4. Vuelva a montar la nueva buj[a. • Si es posible, guarde su unidad en un recinto cerrado y c0brala para protegerla contra el polvo y la mugre.
SOLUCION DE PROBLEMAS este dirigido a un centro i PROBLEMA Falta de fuerza Vibraci6n excesiva amenos doblada 1. Ajuste a la posici6n de "Corte m_.s alto." 2. AItura de las ruedas dispareja. 2. Ajuste a la posici6n de "Corte m_.s alto." 3. Velocidad del motor lenta. 4. Acumulaci6n de c6sped, hojas o basura debajo de la segadora. Demasiado aceite en motor. Velocidad de recorrido 3. 4. Limpie/cambie el filtro de aire. Limpie la parte inferior de la caja de la segadora.
HUSQVARNA 1 ROTARY 2 , LAWN MOWER - - MODEL NUMBER 3 , 917,384540 59 23 43 42 44 44 33 / 4 ......
HUSQVARNA KEY NO. PART NO. 1 2 194176X668 196954 3 4 5 6 7 8 9 10 11 12 432254X498 194788 132004 191574 66426 74780512 154132 185589 162778 178848 13 14 15 18 19 20 21 22 23 25 26 29 30 31 429930X004 182398 51793 17600406 401174X004 401175X004 418655 401621X004 401814X428 446258X668 446262X668 407494X005 401629 185595 IMPORTANT: ROTARY LAWN MOWER - - MODEL NUMBER KEY NO. DESCRiPTiON PART NO.
BRIGGS & STRATTON I 48 SHORT BLOCK I 4=CYCLE ENGINE I 1058 OPERATOR'S MODEL NUMBER MANUAL I 9P702-0110-F1 I 1329 REPLACEMENT I 1330 REPAIR 1264 MANUAL 1036 EMISSIONS 1263'_ ENGINE I LABEL 842 _:_ 615 @ 404 @ 616 718 @ S 741 300 334 718@ 20@ 635 22 _ 42 22A$ I
BRIGGS & STRATTON 4=CYCLE ENGINE MODEL NUMBER 9P702-0110-F1 857 356 216 / 930 (! 97_ 957 23 78_ cd_ 850 222 lj I 37 _:.......... -/2_ A -\\ __-<_ o_ ........
BRIGGS & STRATTON 4=CYCLE ENGINE MODEL NUMBER 9P702-0110-F1 Y 1026 y 238 lO29 _ _ 1029A S 155 1023 337 85O 951 C _-&_ 635 217 914 623 617 318 q# 724 163_/ 493 1238 Q 104_ 163 968 1395 445 528ii @ 875 44
BRIGGS & STRATTON 4-CYCLE ENGINE MODEL NUMBER 121 CARBURETOR OVERHAUL 9P702-0110-F1 KIT 217 104 1 617 _ 623 O 163 358 ENGINE 30 GASKET SET 20@ 623 O 842 O 868 ,_,# Engine Power Rating information The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automo-tive Engineers) code J11940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained and corrected in accordance with SAE J1995 (Revision 2002-5).
BRIGGS & STRATTON KEY NO. PART NO. 1 3 590519 299819s 4 5 7 11 12 13 16 20 22 590569 590525 799586 590522 799587 590512 590538 391483s 692551 22A 590763 23 24 25 26 27 590544 222698s 590521 590523 691588 28 29 32 33 34 35 36 37 40 43 45 46 48 699659 590518 691664 590531 590530 590532 590532 590582 590528 697799 590514 590524 N/A 58 591108 4=CYCLE ENGINE MODEL NUMBER DESCRIPTION KEY NO. PART NO.
BRIGGS & STRATTON KEY NO. PART NO.
ai_liii iiiiiii Jii_Hl! ! Your Home For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters. 1-800-4-MY-HOME ® Anytime, (1-800-469-4663) www.sears.com day or night (U.S.A. and Canada) www.sears.
