Owner's Manual ® sqva OTARY LAWN MOWER 160cc Honda Engine 21" Multi-Cut Model No. 917.384506 Product No. 5521CM • EspaSol, p. 21 CAUTION'. Read and follow all Safety Rules and instructions before operating this equipment Husqvarna, Charlotte, NC 28269 Visit our website: www.husqvarna.com U.S.A.
Safety Rules .......................................... 2-3 Warranty ................................................ 4-7 Product Specifications .............................. 8 Assembly / Pre-Operation ........................ 9 Operation ........................................... 10-13 Maintenance Schedule ........................... 14 Maintenance ...................................... 14-16 Service and Adjustments ................... 17-18 Storage ..............................................
DO: • Mow across the face of slopes: never up and down. Exercise extreme caution when changing direction on slopes. • Remove obstacles such as rocks, tree limbs, etc. • Watch for holes, ruts, or bumps. Tall grass can hide obstacles. DO NOT: * * • Do not trim near drop-offs, ditches or embankments. The operator could lose footing or balance. • Do not trim excessively steep slopes. • Do not mow on wet grass. Reduced footing could cause slipping. * * III.
Husqvarna Consumer Wheeled Products - Limited Warrant_ Husqvarna warrants to the original retail purchaser that this Husqvarna,_R_ ' product is free from defects in material or workmanshil_ under normal use and maintenance from the date of retail purchase for the applicable Warranty Period shown on Exhibit A. This Limited Warranty may not be transferred to any subsequent prochaser of this Husqvarna,_R_ ' product. Certain components (e.g.
Husqvarna 7. Owner's (Your) Responsibilities. To preserve your rights under this Limited Warranty, you must exercise reasonable care and use of the product, including, following the preventative maintenance, storage, fuel and oil usages as prescribed in the enclosed operator's manual. For example, the following items are the Owner's responsibility and are not covered by this Limited Warranty: a. Set-up and pre-delivery service, and engine tune-ups; b.
Husqvama Consumer Wheeled Limited Consumer household Product/Component Warranty (personal, use only) ........................................ IFrame, Chassis, Front Axle Chart 2012 Exhibit A Commercial (any commercial, Rental (any orofessional, institutional, agricultural, or rental usage) income producing use, other than Rent@! U_e/ ..................................
Husqvarna Consumer Wheeled Limited Warranty Chart 2012 Consumer household (personal, use only) Product/Component Accessories accessories, (e.g., grass catcher, bumper guard etc. Replacement parts and/or accessories provided under this Limited Warranty are warranted only for the BALANCE of the warranty period applicable to the part or accessory that was replaced.
Serial Number: Date of Purchase: Gasoline Capacity / Type: 1.0 Quarts (Unleaded Oil Capacity: 18.5 Ounces Oil Type (API SG-SL): SAE 30 (above 32°F) or SAE 10W-30 Spark Plug (Gap: .030") NGK BPR6ES Valve Clearance Intake: 0.015 mm; (+ 0.04 mm): Regular) Exhaust: 0.020 mm 35-40 ft. Ibs. Blade Bolt Torque: • The model and serial numbers will be found on a decal on the rear of the lawn mower housing. Record both serial number and date of purchase in space provided above.
Read these instructions and this manual in its entirety before you attempt to assemble or operate your new lawn mower, IMPORTANT: This lawn mower is shipped WITHOUT OIL OR GASOLINE in the engine. Your new lawn mower has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your lawn mower, all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure proper tightness.
KNOW YOUR LAWN MOWER READ THIS OWNER'S MANUAL AND ALL SAFETY RULES BEFORE OPERATING YOUR LAWN MOWER. Compare the illustrations with your lawn mower to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. These symbols may appear on your lawn mower product. Learn and understand their meaning.
The operation of any lawn SAFETY GLASSES mower can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your lawn mower or performing any adjustments or repairs. We recommend a standard safety glasses or wide vision safety mask worn over spectacles. • To convert to mulching or discharging operation, remove grass catcher and close rear door. Pivot pins ......... .....
MOWER IS NOW READY FOR DISCHARGING OPERATION TO EMPTY GRASS CATCHER 1. Lift up on grass catcher using the frame handle. 2. Remove grass catcher with clippings from under lawn mower handle. 3. Empty clippings from bag. NOTE: Do not drag the bag when emptying; it will cause unnecessary wear. \ /J BEFORE STARTING , Grass catcher frame '_, handle ENGINE ADD OIL Your lawnmower is shipped without oil in the engine. For type and grade of oil to use, see "ENGINE" in the Maintenance section of this manual.
TO STOP ENGINE To stop engine, release operator presence control bar. Wait until blade and all moving parts have stopped and turn fuel valve to OFF position if you do not intend to restart the engine soon. TO START ENGINE NOTE: Due to protective coatings on the engine, a small amount of smoke may be present during the initial use of the product and should be considered normal. 1. Be sure fuel valve is in the ON position. 2. Move choke lever to ON (1\1) position. 3.
MAINTENANCE SCHEDULE EVERY BEFORE A FTEREVERY EACH EACH 10 25 HOURS OR SEASON USE USE HOURS EVERY 100 HOURS BEFORE STORAGE m Check for Loose Fasteners _ Clean / Inspect Grass Catcher * Check Tires _ Check Drive Wheels Clean Lawn Mower ....
LAWN MOWER Always observe safety rules when performing any maintenance. TIRES • Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber. • Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage. BLADE CARE For best results, mower blade must be kept sharp. Replace bent or damaged blades. A CAUTION: Use only a replacement blade approved by the manufacturer of your mower.
Check the crankcase oil level before starting the engine and after each five (5) hours of continuous use. Tighten oil plug securely each time you check the oil level. TO CHANGE ENGINEOIL NOTE: Before tipping lawn mower to drain oil, empty fuel tank by running engine until fuel tank is empty. 1. Disconnectspark plug wire from spark plug and place wire where it cannot come in contact with plug. 2. Remove oil fill cap/dipstick; lay aside on a clean surface. 3.
,_ WARNING" To avoid serious injury, before performing any service and adjustments: 1. Releasecontrol bar and stop engine. 2. Make sure the blade and all moving parts have completely stopped. 3. Disconnectspark plug wire from spark plug and place wire where it cannot come in contact with plug. LAWN Mowing position r-'q ,, Mowing position / f_ II II I i <" Hairpin ___ _Handle Mounting.,1 _ pin MOWER ....
IMPORTANT: Never tamper with the engine governor,which is factory set for proper engine speed. Overspeeding the engine above the factory high speed setting can be dangerous. If you think the engine-governedhigh speed needs adjusting, contact a qualified service center, which has proper equipment and experience to make any necessary adjustments. Immediately prepare your lawn mower for storage at the end of the season or if the unit will not be used for 30 days or more.
ENGINE OIL • Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems. • If possible, store your unit indoors and cover it to protect it from dust and dirt. • Cover your unit with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe, which allows condensation to form and will cause your unit to rust. IMPORTANT: Never cover mower while engine and exhaust areas are still warm.
TROUBLESHOOTING - See appropriate section in manual to a Husqvarna or other qualified Service Center. PROBLEM Loss of power . 3. 4. 5. 6. Poor cut = uneven CORRECTION CAUSE . Rear of lawn mower housing or cutting blade dragging in heavy grass. Cutting too much grass. Dirty air filter. Buildup of grass, leaves, and trash under mower. Too much oil in engine. Walking speed too fast. 1. Worn, bent or loose blade. 2. Wheel heights uneven. 3. Buildup of grass, leaves and trash under mower. Excessive .
Reglas de Seguridad ................................ 21-22 Garanfia .................................................... 23-26 Especificaciones del Producto ....................... 27 Montaje / Pre-Operaci6n ............................... 28 Operaci6n ................................................. 20-32 Programa de Mantenimiento ......................... 33 Mantenimiento .......................................... 33-35 Servicio y Adjustes ................................... 36-37 AImacenamiento .......
HACER: • Puede recortar a trav_s de la superficie de la cuesta, nunca hacia arriba y hacia abajo. Proceda con extrema precauci6n cuando cambie de direcci6n en las cuestas. • Renueva todos los objetos extraflos, tales como guijarros, ramas, etc. • Debe prestar atenci6n a hoyos, baches o protuberancias. Recuerde que la hierba alta puede esconder obst_.culos. NO HACER: • No recorte cerca de pendientes, zanjas o terraplenes. El operador puede perder la tracci6n en los pies o el equilibrio.
Husqvarna Productos con ruedas para consumidor - Garantia limitada Husqvarna garantiza al comprador minorista original que este producto Husqvarna(R) carece de defectos materiales o de fabricacidn con un uso y mantenimiento normales desde el dia de la compra, dentro del periodo de garantia aplicable indicado en el Anexo A.
Husqvarna 5. Cualquier uso COMERCIAL, INSTITUCIONAL, AGRJCOLA, INDUSTRIAL, QUE PRODUZCA INGRESOS o DE ALQUILER tendril como resultado la p6rdida de garantia o un periodo de garantia menor.
Husqvarna COMO OBTENER SERVICIO 10. Centro/concesionario de servicio Husqvarna autorizado. Para obtener cobertura de garantia, es su responsabilidad (a su costo y cargo) entregar o enviar su unidad Husqvarna a un centro/concesionario de servicio Husqvarna autorizado y organizar la recogida o la devolucidn de su unidad despuds de clue se hayan realizado las reparaciones. Si desconoce la ubicacidn del concesionario de servicio Husqvarna autorizado mils cercano, llame a Husqvarna al 1-800-487-5951 de 8:00 a.
Husqvama Tabla de garantia limitada de 2012 para productos Consumidor (personal, solo para uso domestico) de consumo con ruedas AnexoA Comercial (cualquier uso comercial, profesional, institueional, agricola o que genere ingresos, que no sea Alquiler (cualquier uso para alquiler) Sin garantia Sin garantia Sin garantia Sin garantia 2 a5os 2 a_os 2 aSos 2 aSos Sin garantia Sin garantia Producto/Componente Modelo 5525PW: Motor* * Bomba Otros componentes perecederos Todas las otras hidrolavad
N0mero de Serie: Fecha de Compra: Capacidad y Tipo de Gasolina: 1.0 Cuartos Capacidad de Aceite: 18.50nzas Tipo de Aceite (API SG-SL): Bujia (Abertura: Tolerancia Torsi6n del Perno SAE 30 (Debajo .030") de Valvula (Regular NGK (+ 0.004 mm) 35-40 0°C/32°F) o SAE 10W30 BPR6ES Admisi6n: de la Cuchilla: sin PIomo) 0.015 mm; Descarga: 0.020 mm ft. Ibs. • El n0mero del nodelo y el de serie se encuentran en la calcomania adjunta a ia parte trasera de la caja de la segadora.
Lea estas instrucciones y este manual completamente antes de tratar de montar u operar su segadora nueva. IMPORTANTE: Este cortac_sped viene SIN ACEITE O GASOLINA en el motor. Barra de que sxige la presencia det operador ///J Su segadora nueva ha sido montada en la f_.brica con la excepci6n de aquellas partes que se dejaron sin montar por razones de env[o. Todas las partes como las tuercas, las arandelas, los pernos, etc.
FAMILIARICESE CON SU SEGADORA LEA ESTE MANUAL DEL DUENO Y LAS REGLAS DE SEGURIDADANTES DE OPARAR SU SEGADORA. Compare las ilustraciones con su segadora para familiarizarse con la ubicaci6n de los diversos controles y ajustes. Guarde este manual para referencia en el futuro. Estos simbolos pueden apareser producto. Aprenda y comprenda ATTENCION O ADVERTENClA MOTOR ENCENDIDO MOTOR APAGADO sobre su segadora sus significados.
La operaci6n de cualquier segadora puede hacer que salten objetos extrahos dentro de sus ojos, Io que puede producir dahos graves en 6stos. Siempre use anteojos de seguridad o protecci6n para los ojos mientras opere su segadora o cuando haga ajustes o reparaciones. Recomendamos gafas o una mascara de seguridad de visi6n amplia de seguridad usada sobre las gafas. COMO USAR SU SEGADORA VELOCIDAD DEL MOTOR La velocidad del motor se estableci6 en la fb.brica para un rendimiento 6ptimo.
PASOS SIMPLES DE RECORDAR CUANDO CONViERTA SU SEGADORA PARA ACOLCHAMIENTO 1. 2. TRASERO - La plancha acolchadora trasera removida. Recogedor del c6sped instalado. La protecci6n contra la descarga cerrada. PARA DESCARGA 1. 2. - La plancha acolchadora trasera instalada. La protecci6n contra la descarga cerrada. PARA ENSACAMIENTO 1. 2. 3. IMPORTANTE: • Revise el nivel del aceite antes de cada uso. Agregue aceite si es necesario. Llene hasta la linea de Ileno en la varilla medidora de nivel.
PARA PARAR EL MOTOR _---Para parar el motor y si no intenta ponerlo en marcha de nuevo, alivie la barra de control que exige la presencia del operador. Espere hasta que la cuchilla y todas las piezas m6viles se hallan parado y mueva la vb.lvula del combustible a la posicion APAGADO (OFF). PARA HACER ARRANCAR EL MOTOR AVISO: Debido alas capas protectoras del motor, una cantidad pequeha de humo puede estar presente durante el uso inicial del producto y se debe considerar normal. 1. Asegurase que v_.
PROGRAMA DE MANTEN|M| NTO Revisar si hay Sujetadores S Limpiar/Inspeccionar ANTES DESPUES CADA CADA CADA ANTES DEL DE CADA DE CADA 10 25 HORAS O 100 ALMACEUSO USO HORAS TEMPORADA HORAS NAMIENTO Sueltos el Recogedor * E Controlar los Neumaticos G Controlar las Ruedas A Limpiar la Segadora [_ Limpiar debajo la Cubierta de la Transmisidn *** O Revisar las Correas y las Poleas Impulsadas *** R Revisar / Afilar / Cambiar j_ Motrices v' v' v' v' *** ....
SEGADORA Siempre observe las reglas de seguridad cuando haga el mantenimiento. LLANTAS • Mantenga las Ilantas sin gasolina, aceite o substancias qu[micas para control de insectos que pueden daflar la goma. • Evite los tocones, las piedras, las grietas profundas, los objetos afilados y otros peligros que pueden daflar alas Ilantas. CUIDADO DE LA CUCHILLA Para obtener los mejores resultados, la cuchilla de la segadora tienen que mantenerse afilada. Cambie la cuchilla doblada o daflada.
Revise el nivel del aceJte del carter antes de arrancar el motor y despu_s de cada cinco (5) horas de uso continuado. Apriete el tap6n del aceite en forma segura cada vez que revise el nivel del aceite. PARA CAMBIAR EL ACEITE DEL MOTOR AVlSO: Antes de inclinar la segadora para drenar el aceite, drene el tanque de combustible haciendo cotter el motor hasta que el tanque est6 vacio. 1. Desconecte el alambre de la buj[a y p6ngalo de modo que no pueda entrar en contacto con 6sta. 2.
_ADVERTENClA: Para evitar lesi6nes serias, antes de dar calquier servico o de hacer ajustes: 1. Suelte la barra de control y pare el motor. 2. AsegOrese que la cuchilla y que todas las partes movibles se hayan detenido completamente. 3. Desconecte el alambre de la bujfa y p6ngalo en donde no pueda entrar en contacto con 6sta.
IMPORTANTE: Nunca manipule el regulador del motor, el que ha sido ajustado en la f_.brica para la velocidad del motor adecuada. Puede ser peligroso hacer funcionar el motor a una velocidad por sobre el ajuste de alta velocidad de la f_.brica. Si cree que la velocidad alta regulada del motor necesita ajuste,contacto con su centro de servicio cualificado, el que cuenta con el equipo adecuado y la experiencia para hacer los ajustes necesarios.
ACEITE DEL MOTOR Drene el aceite (con el motor caliente) y cb.mbielo con aceite de motor limpio. (Vea "MOTOR" en la secci6n de Mantenimento de este manual.) ClLINDRO 1. Remuevala bujfa. 2. Vade una onza (29 ml) de aceite a tray,s del agujero de la bujfa en el cilindro. 3. Tire la manilla de arranque lentamente unas cuantas veces para distribuir el aceite. 4. Vuelva a montar la nueva buj[a. • Si es posible, guarde su unidad en un recinto cerrado y c0brala para protegerla contra el polvo y la mugre.
SOLUCION DE PROBLEMAS este dirigido a un centro i PROBLEMA Falta de fuerza Vibraci6n excesiva amenos doblada 1. Ajuste a la posici6n de "Corte m_.s alto." 2. AItura de las ruedas dispareja. 2. Ajuste a la posici6n de "Corte m_.s alto." 3. Velocidad del motor lenta. 4. Acumulaci6n de c6sped, hojas o basura debajo de la segadora. Demasiado aceite en motor. Velocidad de recorrido 3. 4. Limpie/cambie el filtro de aire. Limpie la parte inferior de la caja de la segadora.
o 84 '\ 65 41 ! 3O 49 /' 36 39 $8 37 10 58 65 9 3/_ "_. 20 ....
HUSQVARNA KEY NO. 1 2 PART NO. ROTARY LAWN MOWER - MODEL NUMBER DESCRiPTiON KEY NO. PART NO.
HONDA 4-CYCLE CYLINDER BARREL ENGINE J MODEL NUMBER y_ , GCV-160-LAOS3A CRANKSHAFT ® 318 24UNF 2B TAP _86.7 _ _25 CARBURETOR 42 135.
HONDA 4=CYCLE ENGINE MODEL NUMBER CYLINDER BARREL KEY PART NO. NO. DESCRIPTION 1 12000-ZOL-406 Cylinder Assembly 12000-ZOL-840 Cylinder Assembly 3 12310-Z0J-000 Cover, Cylinder Head 12311 -ZL8-D00 Cover, Head 12311 -ZL8-000 Cover, Head 4 12355-ZL8-000 Cover, Breather 5 90013-883-000 6 90014-952-000 7 91201-ZL8-003 8 98079-55846 10 12209-ZM0-003 11 14711-ZL8-000 14711 -Z0J-000 14711 -Z0J-800 12 14721-ZL8-000 13 14751-ZL8-000 14 14771-Z0J-000 CONTROL KEY PART NO. NO.
HONDA 4=CYCLE ENGINE MODEL NUMBER GCV-160-LAOS3A 21 27 48 45 12 49 33 8 IE=14 4O FAN COVER _ i FLYWHEEL 23 --17 26- 5 AiR CLEANER i 18 i MUFFLER 3 7 44
HONDA 4=CYCLE ENGINE FAN COVER KEY PART NO. NO. 6 16950-ZOY-003 7 16952-ZA8-800 8 16961-Z0L-900 9 17511-Z0L-030 10 17514-ZOL-000 11 17516-Z0L-000 12 17532-ZOL-000 13 17533-ZOL-000 14 17534-ZOL-000 15 17620-ZOJ-800 16 17636-ZOL-000 21 19610-Z0L-861ZC MODEL NUMBER FLYWHEEL KEY PART NO. NO.
HONDA 4-CYCLE ENGINE MODEL NUMBER GCV-160-LAOS3A I i t i I I 6 I _ ......................... t _6 13--@ CAMSHAFT 15 //_ 1 J CONNECTING ROD -- E-3 I "" 9 ' %_-_41 _ " 46 13 10 ! _J /.
HONDA 4=CYCLE ENGINE MODEL NUMBER CAMSHAFT PULLEY KEY PART PISTON / CONNECTING KEY PART NO. NO. 1 14320-ZL8-010 2 14324-ZL8-000 3 14400-ZOJ-014 NO. NO. 1 13101-Z2A-010 2 13111-ZE0-000 3 13200-ZOJ-000 4 90001-ZE1-000 5 90551-ZE0-000 6 13010-ZOL-014 6 11 12 13 15 16 14461-ZL8-000 90112-333-000 90206-001-000 91301 -ZM0-V31 14431-ZOJ-000 14441-ZOJ-000 OiL PAN KEY PART NO. NO.
ai liii iiiiiii Jii Hl! ! Your Home For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters. 1-800-4-MY-HOME ® Anytime, (1-800-469-4663) www.sears.com day or night (U.S.A. and Canada) www.sears.