® 07C Owner's "This machine 532 44 14-57 Manual is approved by the EPA for EIO (10% ethanol) Do not use any fuel >EIO in this machine." and lower fuel only.
SAFETY RULES Practices for Ride=On Safe Operation Mowers DANGER: THiS CUTTING MACHINE iS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT iN SERIOUS iNJURY OR DEATH. • • WARNING: In order to prevent accidental starting when setting up, transporting, adjusting or making repairs, always disconnect spark plug wire and place wire where it cannot contact spark plug.
SAFETY RULES Practices for Ride=On Safe Operation Mowers ill. CHILDREN GENERAL SERVICE Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Never assume that children will remain where you last saw them. • Keep children out ofthe mowing area and inthe watchful care of a responsible adult other than the operator. • Be alert and turn machine off if a child enters the area.
PRODUCT SPECiFiCATiONS CUSTOMER Gasoline Capacity and type: Oil Type (API-SG-SL): 2.5 Gallons (9,5 L) Unleaded Regular SAE 10W30 (above 32°F/0°0) SAE 5W30 (below 32°F/0°0) Oil Capacity: W/Filter: W/O Filter: Spark Plug: Champion RC12YC (Gap: .030") Ground Speed (MPH): Forward: Reverse: • 51 oz (1.5 L) 35 oz (1.
UNASSEMBLED PARTS Slope Key Sheet (1) Oil Drain Tube (2) Keys ASSEMBLY Your new tractor has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. TOOLS REQUIRED FOR ASSEMBLY A socket wrench set will make assembly easier. Standard wrench sizes are listed.
ASSEMBLY _CHECKLIST NOTE: You may now roll your tractor off the skid. Follow the instructions below to remove the tractor from the skid. BEFORE YOU OPERATE YOUR NEW TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST PERFORMANCE AND SATISFACTION FROM THIS QUALITY PRODUCT. _,WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.
OPERATION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning.
OPERATION KNOW YOUR TRACTOR READ THiS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference. Fig. 3 Our tractors conform to the applicable safety standards of the American National Standards Institute. (A) ATTACHMENT LIFT LEVER - Used to raise and lower the mower or other attachments mounted to your tractor.
OPERATION The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend standard safety glasses or a wide vision safety mask worn over spectacles. HOW TO USE YOUR TRACTOR GROUND DRIVE • TO SET PARKING BRAKE To stop ground drive, depress brake pedal into full "BRAKE" position.
OPERATION TO MOVE FORWARD AND BACKWARD • The average lawn should be cut to approximately 2-1/2" during the cool season and to over 3" during hot months. For healthier and better looking lawns, mow often and after moderate growth. • For best cutting performance, grass over 6" in height should be mowed twice. Make the first cut relatively high; the second to desired height. (See Fig. 7) The direction and speed of movement is controlled by the forward and reverse drive pedals.
OPERATION • • • • • Avoid stopping or changing speed on hills. If stopping is absolutely necessary, push brake pedal quickly to brake position and engage parking brake. To restart movement, slowly release parking brake and brake pedal. Slowlydepress appropriate drive pedalto slowestsetting. Make all turns slowly. TO TRANSPORT (See Figs. 3 and 12) ......... Fig. 10 & CAUTION: Do not operatethe mowerwithout | either the entire grass catcher, on mowers so equipped, orthe deflector shield (S) in place.
OPERATION BEFORE CHECK STARTING ENGINE THE ENGINE TO START OIL LEVEL The engine in your tractor has been shipped, from the factory, already filled with summer weight oil. • Check engine oil with tractor on level ground. • Remove oil fill cap/dipstick and wipe clean, reinsert the dipstick and screw cap tight, wait for a few seconds, remove and read oil level. If necessary, add oil until "FULE' mark on dipstick is reached. Do not overfill.
OPERATION PURGE TRANSMISSION MOWING freewheel lever while the engine is CAUTION: Never engage or disengage running. _ To ensure proper operation and performance, it is recommended that the transmission be purged before operating tractor for the first time. This procedure will remove any trapped air inside the transmission which may have developed during shipping of your tractor.
MAINTENANCE MAINTENANCE SCHEDULE BEFORE EACH USE v" Check Brake Operation Check Tire Pressure T Check A T Check for Loose Fasteners Check/Replace Mower Blades Lubrication Chart 0 Check Battery Clean Battery Clean Debris Check Transaxle C R Mower V-Belts Check Engine v' v' v' Oil Level Oil (with _#fP 1,2 oil filter) _F1,2 V'2 Air Filter G Air Screen V"2 Muffler/Spark v' Attester _,2 Oil Filter (If equipped) Engine Cooling Spark Replace m v' Levelness NE Clean Replac
MAINTENANCE TRACTOR Always observe maintenance. BLADE safety rules when performing CARE For best results mower blades must be kept sharp. Replace bent or damaged blades. any BRAKE OPERATION If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be checked and adjusted. (See "TO CHECK BRAKE" in the Service and Adjustments section of this manual).
MAINTENANCE V=BELTS OIL DRAIN VALVE Check V-belts for deterioration and wear after 100 hours of operation and replace if necessary. The belts are not adjustable. Replace belts if they begin to slip from wear. CLOSED TRANSAXLE LOCKED _--_ COOLING The transmission fan and cooling fins should be kept clean to assure proper cooling. \ Do not attempt to clean fan or transmission while engine is running or while the transmission is hot.
MAINTENANCE SPARK PLUGS Replace spark plugs at the beginning of each mowing season or after every 100 hours of operation, whichever occurs first. Spark plug type and gap setting are shown in "PRODUCT SPECIFICATIONS" section of this manual. IN=LINE FUEL FILTER (See Fig. 17) The fuel filter should be replaced once each season. If fuel filter becomes clogged, obstructing fuel flow to carburetor, replacement is required. • With engine cool, remove filter and plug fuel line sections.
SERVICE AND ADJUSTMENTS * Depress brake pedal fully and set parking brake. TO AVOID clutch SERIOUS iNJURY, BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS: *WARNING: Place attachment in "DISENGAGED" position. _ * * * TO REMOVE • • • • • • • MOWER iMPORTANT: IF AN ATTACHMENT OTHER THAN THE MOWER IS TO BE MOUNTED ON THE TRACTOR, REMOVE THE FRONT LINK (E) AND REAR LIFT LINKS (C) FROM TRACTOR AND HOOKTHE CLUTCH SPRING (Q) INTO THE CABLE GUIDE ON FRONT EDGE OF LOWER DASH. (See Fig.
SERVICE AND ADJUSTMENTS • • ATTACH MOWER SIDE SUSPENSION ARMS (A) TO CHASSIS - Position hole in arm over pin (B) on outside of tractor chassis and secure with retainer spring. Repeat on opposite side of tractor. • • Fig. 21 • ATTACH REAR LIFT LINKS (C) - Lift rear corner of mower and position slot in link assembly over pin (D) on rear mower bracket and secure with washer and retainer spring. • Insert end of link (E) into hole in front mower bracket and secure with washer and retainer spring (J).
SERVICE AND ADJUSTMENTS TO LEVEL MOWER Make sure tires are properly inflated to the PSI shown on tires. If tires are over or under inflated, it may affect the appearance of your lawn and lead you to think the mower is not adjusted properly. If adjustment is necessary, see step in Visual Adjustment instructions above. • Recheck measurements, adjust if necessary until both sides are equal. FRONT=TO-BACK ADJUSTMENT (See Figs. 28 & 29) iMPORTANT: Deck must be level side-to-side.
SERVICE AND ADJUSTMENTS TO REPLACE MOWER BLADE DRIVE BELT TO REPLACE (See Fig. 31) (See Fig. 30) The mower blade drive belt may be replaced without tools. Park the tractor on level surface. Engage parking brake. MOTION DRIVE BELT Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest. BELT REMOVAL • Remove mower from tractor (See "TO REMOVE MOWER" in this section of manual).
SERVICE AND ADJUSTMENTS FRONT WHEEL TOE-IN/CAMBER Your new tractor front wheel toe-in and camber isset at the factory and is normal. The front wheel toe-in and camber are not adjustable. If damage has occurred to affect the factory set front wheel toe-in or camber, contact a qualified service center. TO REMOVE WHEEL (See Fig. 32) TO REMOVE CABLES, REVERSE ORDER • BLACK cable first from chassis and then from the fully charged battery. • RED cable last from both batteries.
SERVICE AND ADJUSTMENTS TO REPLACE • • • • HEADLIGHT ENGINE BULB Raise hood. Pull bulb holder out of the hole in the backside of the grill. Replace bulb in holder and push bulb holder securely back into the hole in the backside of the grill. Close hood. iNTERLOCKS TO ADJUST CONTROL CABLE The throttle control has been preset at the factory and adjustment should not be necessary. If adjustment is necessary, see engine manual.
STORAGE ENGINE Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more. FUEL SYSTEM iMPORTANT: IT IS IMPORTANTTO PREVENT GUM DEPOSITS FROM FORMING IN ESSENTIAL FUELSYSTEM PARTS SUCH AS CARBURETOR, FUEL FILTER, FUEL HOSE, OR TANK DURING STORAGE. ALSO, EXPERIENCE INDICATES THAT ALCOHOL BLENDED FUELS (CALLED GASOHOL OR USING ETHANOLOR METHANOL) CAN ATTRACT MOISTURE WHICH LEADS TO SEPARATION AND FORMATION OFACIDS DURING STORAGE.
TROU CAUSE PROBLEM Will not start Hard to start Engine will not over Engine clicks wiil not start Loss of power but CORRECTION Out of fuel. 2. 3. 4. 5. 6. 7. Engine not "CHOKED" properly. Engine flooded. Bad spark plug. Dirty air filter. Dirty fuel filter. Water in fuel. 2. 3. 4. 5. 6. 7. 8. 9. Loose or damaged wiring. Carburetor out of adjustment. 8. 9. Engine valves out of adjustment. 10. See "TO START ENGINE" in Operation section. Wait several minutes before attempting to start.
T PROBLEM CAUSE Engine continues to run when oper= ator leaves seat with attachment clutch POINTS CORRECTION 1. Faulty operator-safety system. 1. 2. presence control 1. Check wiring, switches and connections. If not corrected, contact an authorized service center/ department. Worn, bent or loose blade. Mower deck not level. 1. 2. Replace blade. Tighten blade bolt. Level mower deck. 3. 4. Buildup of grass, leaves, trash under mower. Bent blade mandrel. 5.
TRACTOR - - MODEL NUMBER 917.240460, PRODUCT NO. YTH20K46 SCHEMATIC SCH10 BATTERY SOLENOID r STARTER AMMETER I} I RED FUSE (OPTIONAL) WHITE i I I ] i i '©i© , i , i t} ....... , , tt © i r I I ........' +LUT+HOF I ATTACHMENT CLUTCH ; I r----,5 ,_ _ - .......-- j I REVERSE SWITCH _ I (NOT ......
TRACTOR - - MODEL NUMBER 917.240460, PRODUCT NO. YTH20K46 ELECTRICAL T06S With 12V Outlet Option 1 87 I 34 With Service Minder Option 42 40 16 _/ / / / 71 \\ \ \ \ \ 27 / / \ \\ \ I I I I I I 29 \\ \ \\ \ 55 I I I I i 28 I I I I
TRACTOR - - MODEL NUMBER 917.240460, PRODUCT NO. YTH20K46 ELECTRICAL KEY NO. 1 2 8 16 21 22 25 26 27 28 29 30 33 34 40 41 42 43 46 55 71 79 87 90 102 105 PART NO.
TRACTOR - - MODEL NUMBER 917.240460, PRODUCT NO. YTH20K46 CHASSIS 297 2O4 203 _191 214 14 206 234 25 _137 234 _ 137 176 _176 175 \ 150 176 130 181 236 36 196 138 \ 130 194 36 _ L 194 28'_ 228 181 189 iI 217 228 152 chassis-tex_GT HUSQ II 34 30 189
TRACTOR - - MODEL NUMBER 917.240460, PRODUCT NO. YTH20K46 CHASSIS KEY NO. 3 5 14 15 18 25 34 36 37 52 68 130 137 138 150 151 152 159 162 175 176 177 180 181 182 183 189 191 194 195 196 202 203 204 205 206 207 208 213 214 217 218 228 234 235 236 287 297 PART NO.
TRACTOR - - MODEL NUMBER 917.240460, PRODUCT NO. YTH20K46 DRIVE 207 206 16 56 I I I I I I 35 I 52 @ 22' / / / 153 / \ 49 208 210 211 _186 188 222 163 189 \ _187 I 29 211 166 59 183 116 52 225 51 230 205 183 205 33 73 drive-tex_K46_pedal_87 32
TRACTOR - - MODEL NUMBER 917.240460, PRODUCT NO. YTH20K46 DRIVE KEY NO. 1 2 15 17 28 29 33 35 42 49 50 51 52 56 64 73 80 92 99 116 125 143 153 159 160 161 163 166 167 170 PART NO. DESCRIPTION 532 42 61-20 Transaxle, TUFFTORQ K46 BT (See Transaxle breakdown) 5321235-83 Key 819 13 13-16 Washer 13/32 x 13/18 x 18 Ga.
TRACTOR - - MODEL NUMBER 917.240460, PRODUCT NO. YTH20K46 ENGINE 87 82 18 15 37 / 29 9 \85 I SPARK ARRESTER KIT I engine-tex_Kohl_31 34
TRACTOR - - MODEL NUMBER 917.240460, PRODUCT NO. YTH20K46 ENGINE KEY NO. 1 2 9 12 15 18 20 21 28 29 37 42 45 69 79 81 82 85 87 90 92 94 96 97 111 NOTE: PART NO.
TRACTOR STEERING - - MODEL NUMBER 917.240460, PRODUCT NO.
TRACTOR STEERING - - MODEL NUMBER 917.240460, PRODUCT ASSEMBLY KEY NO. 1 2 4 5 8 7 8 9 13 14 15 16 19 21 22 28 28 35 45 51 53 57 58 59 60 81 82 63 84 66 87 68 89 70 NOTE: PART NO.
TRACTOR - - MODEL NUMBER 917.240460, PRODUCT NO. YTH20K46 SEAT ASSEMBLY 21 I 3 seat-tex KEY NO. 1 2 3 6 7 8 10 21 6.5SL PART NO. 532 532 532 873 532 532 532 532 42 18 14 80 12 17 19 17 2 KEY NO. DESCRIPTION 40-68 01-66 06-75 06-00 41-81 18-77 69-77 18-52 Seat Bracket Pivot Fender Strap, Asm Fender Nut, Lock w/Ins. 3/8-16 unc Spring, Seat Cprsn Bolt 5/16-18 unc x 3/4 w/Sems Pan, Seat Bolt, Shoulder 5/16-18 37 40 41 43 44 PART NO.
TRACTOR MOWER - - MODEL NUMBER 917.240460, PRODUCT NO. YTH20K46 LIFT 87 88 97 91 87 89 89 87 *Key KEY NO. 2 3 7 10 87 88 89 9O 91 PART NO. 532 532 532 532 532 532 819 532 532 42 19 41 19 19 41 19 19 19 KEY NO. DESCRIPTION 20-27 52-31 15-55 63-14 42-09 07-10 19-12 42-08 51-81 97 98 100 101 Shaft Asm., Lift Lever Asm., Lift RH Grip, Lever Spring Torsion Pin Cotter 7/16 Bow Tie Lock Spring Lift Assist Washer Clear Zinc Pin Cotter 5/16 Bow Tie Lock Link Lift Susp Mower Rear PART NO.
TRACTOR MOWER - - MODEL NUMBER 917.240460, PRODUCT NO. YTH20K46 DECK 67 46 43 A 23 42- _195 3O 113 \ 117" .....
TRACTOR MOWER KEY NO. 1 2 3 6 7 8 11 -13 14 15 19 21 23 24 25 26 27 29 30 31 32 33 34 36 37 38 40 42 43 46 47 55 56 57 59 - - MODEL NUMBER 917.240460, PRODUCT NO. YTH20K46 DECK PART NO.
TRACTOR - - MODEL NUMBER 917.240460, PRODUCT NO. YTH20K46 DECALS 56 10 12 KEY NO. 1 2 3 5 6 9 10 PART NO. 532 532 532 532 532 532 532 WHEELS 41 42 44 42 44 14 17 KEY NO. DESCRIPTION 16-57 91-96 14-81 38-29 14-53 50-05 05-63 Decal Decal Decal Decal Decal Decal Decal Operators Badge Hood Panel SD Customer Respons.
TRACTOR TUFFTORQ - - MODEL NUMBER TRANSAXLE MODEL NUMBER PRODUCT NO. YTH20K46 K46BT _m87 MODEL K46BT 7A646084180 ACTUAL 917.240460, PARTS MAY NOT APPEAR AS SHOWN _c_83 @m34 116 I 115 53 I 96m_ 72 I 91 6_(@_ 55 KEY NO. PART NO.
TRACTOR KOHL ENGINE - - MODEL NUMBER - MODEL 917.240460, PRODUCT NO. YTH20K46 NO. SV600-3229 CRANKSHAFT 1-20-4 _--25 20 043 15-S _ 20 043 12-S 086 214=S D-- X=42=15-S 25 139 27-S 20 186 04-S 25 086 213-S ___ --20 014 32=S 20 423 02=S 380 16-S 25 139 27-S 25 340 02-S_ 20 20 20 20 20 20 20 014 014 014 014 014 014 014 09-S-14-S 15-S 20-S 21-S 24-S 26-S 20 186 02=S .
TRACTOR - - MODEL NUMBER KOHL ENGINE - MODEL 917.240460, PRODUCT 20 044 16-S 044 32-S CRANKCASE 2-20-22 20 468 03-S j 468 03-S 20 089 06-S 20 010 04-S 010 05-S 20 010 07-S 20 010 03-S 20 010 04-S 20 010 06-S 2014405-S_ NO. YTH20K46 NO.
TRACTOR KOHL ENGINE - - MODEL NUMBER - MODEL 917.240460, PRODUCT NO. YTH20K46 NO. SV600=3229 OiL PAN/LUBRICATION 3-20-40 20 040 02-S 20 040 08-S_ /20 20 20 20 25 153 09-S_ 040 040 040 040 .
TRACTOR - - MODEL NUMBER KOHL ENGINE - MODEL HEAD/VALVE/BREATHER 917.240460, PRODUCT NO. YTH20K46 NO. SV600-3229 4-20-19 20 20 20 20 20 20 20 20 20 318 318 318 318 318 318 318 318 318 10-S 01-S 03-S 05-S 07-S 11-S 12-S 14-S 15=S 20 841 01-S 20 841 02=S \ 20 016 01-S 20 016 02-S 20 089 03-S 20 086 02=S 20 173 01-S 20 599 01-S_ 20 086 04-S-_ 20 017 01-S 20 017 02=S 20 062 01=S _\ 20 146 03-S \12 468 05-S 28 032 01-S 032 10-S 20 086 03-S 20 072 08-S _-- 20 599 02-S 20 599 03-S 20 599 20 086 09
TRACTOR KOHL ENGINE - - MODEL NUMBER - MODEL 917.240460, PRODUCT NO. YTH20K46 NO.
TRACTOR - - MODEL NUMBER KOHL ENGINE - MODEL 917.240460, PRODUCT NO. YTH20K46 NO. SV600-3229 FUEL SYSTEM 8-20-132 20 462 01-S I 25 173 23-S 25 050 35-S 25 326 14=S 25 173 25-S 25 050 08-S M-545010-S 25 326 18-S 25 326 08-S Y_25 155 40-S 25 25 050 050 22-S 21-S M-645016-S / 47 154 01-S /_/_2s 23714-s _ _ _ 12 050 13-S _'°>.C_\ 2s05007-s 20126 o2- 11134-s 20 332 01-S 20 20 20 20 20 20 20 20 20 20 20 20 20 25 111 34-S 20 126 12-S M-445010-S ,_/ 25 173 25;-S 25 237 14-S 20 041 18-S 2
TRACTOR KOHL ENGINE - - MODEL NUMBER - MODEL 917.240460, PRODUCT NO. YTH20K46 NO. SV600-3229 AIR INTAKE/FILTRATION 10-20-12 25 173 33-S __FUELSYSTEM 20 094 01-S 20 094 04-S 20 094 06-S 12 041 02-S 155 51-S M-445010-S 25 326 08-S 20 126 20 072 04-S 20 083 02-S / 20 096 04-S 096 05-S DECALS 12-20-23 f\ 25 113 39-S-- 20 083 03-S "WARN'NG l DONOTTOUCHSCREEN 25 25 25 25 25 113 33-S WiTHENGINE RUNNIN2G:_ 3j 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 1t3 113 113 113 113 113 113 113 113 11
TRACTOR - - MODEL NUMBER KOHL ENGINE - MODEL Crankshaft 1-20-4 Part No. Description CRANKSHFT ASSY USE 20 014 43-S (includes 25 139 27-S) PLUG, CUP KEY, 3/16" X 5/8" GEAR, CRANKSHAFT SCREW, LINK PIVOT LINKAGE, BALANCE WEIGHT SCREW, SHOULDER 20 014 32-S 25 139 27-S X-42-15-S 20 043 15-S 25 086 214-S 20 186 04-S 25 086 213-S Crankcase Part No.
TRACTOR KOHL ENGINE Engine Controls Part No. 20 536 06-S 25 086 297-S 20 089 12-S 12 237 01-S M-664020-S 12 089 11-S 20 090 11 -S 52 211 04-S X-22-11 -S 12 100 07-S 25 158 11-S 20 079 07-S 25 158 08-S 20 089 10-S 20 07! 9 05-S 20 086 18-S 24 086 43-S 20 086 10-S 12 089 11-S 917.240460, NO. SV600=3229 9=20=8 Description KIT, SPEED CONTROL ASSEMBLY (INCLUDES 25 086 297-S, 20 089 12-S, M66420-S [QTY.
I / / / / / Oc._'c 0 u 3 _g_-E 2_B" o E_£_ zo OZ --Ir}>-< 0:0 0oo_0. -o.E_- Om =_. _= oo o°_ o_ oa. o_ o
MANTENIMENTO TRACTOR CUIDADO Siempre observe las regtas de seguridad cuando de mantenimiento. OPERACI6N DEL FRENO Para obtener resuttados 6ptimos, las cuchillas de la cortadora deben estar afiladas. Reemptace tas cuchillas que esten gastadas, dobtadas o dafladas. Si et tractor necesita m&s de cinco (5) pies para detenerse a la m&xima vetocidad al cambio m&s alto en una superficie nivetada, de hormig6n o pavimentada, hay que hacerle et servicio al freno.
MANTENIMENTO CORREAS V V/_LVULA DE DESAGUE DEL ACEITE Revise las correas V para verificar si existe deterioro y desgaste despues de 100 horas de operaci6n y c&mbielas si es necesario. Las correas no son ajustabtes. Cambie las correas si empiezan a destizarse debido at desgaste. ENFRIAMIENTO POSICION CERRADAY BLOQUEADA DEL TRANSEJE Las aletas de enfriamiento y et ventilador de ta transmisi6n tienen que mantenerse limpios para asegurar el enfriamiento adecuado.
MANTENIMENTO SILENCIADOR PUERTO Inspeccione y cambie et silenciador corroido y et amortiguador de chispas (si viene equipado) pues pueden crear un petigro de incendio y/o daflos. (Vea Fig. 19) FILTRO DE COMBUSTIBLE DE LAVADO DE LA CUBIERTA La cubierta de su tractor est& equipada con un puerto de lavado sobre la superficie que forma parte det sistema de lavado de la cubierta. Se deberia utilizar cada vez que se haya usado et tractor. 1.
SERVICIO Y AJUSTES AJUSTES: • DVERTENCIA: Presione el pedal freno completamente y aplique de CUALQUIER estacionamiento. PARAdeEVITAR LESI6NES SERIAS, ANTESel freno DE DAR SERVICIO O DE HACER • Asegur_is que el transmisi6n en la posici6n de neutro. • Ponga el embrague del accesorio en la posici6n desenganchado (DISENGAGED). • Ponga la Ilave de ignici6n en la posici6n de apagado (STOP) y remu_vala. • Aeeg_reae que las cuchillae y que todas las partes movibles se hayan detenido completamente.
SERVICIO • • Y AJUSTES FIJE LOS BRAZOS DE SUSPENSION LATERALES DE LA CORTADORA (A) AL CHASIS - Ubique el orificio det brazo encima de la clavija (B) que hay en la parte exterior del chasis del tractor, y fijeto con una resorte de contenci6n. Realice et mismo procedimiento en et otro lado del tractor. • • Fig.
SERVlCIO PARA NIVELAR Y AJUSTES AJUSTE DE DELANTE A ATRAS (Vea Fig. 28 y 29) LA SEGADORA AsegQrese de que los neum_.ticos esten inflados a la PSi que se indica en estos. Si estb,n demasiado inflados o poco inflados, et cesped no le quedar_, bien cortado, Io cual podr_. Ilevarlo a pensar que la SEGADORA no est,. bien regulada. REGULACION • • IMPORTANTE: El piso debe quedar bien nivetado de lado a lado.
SERVICIO PARA CAMBIAR LA CUCHILLA LA CORREA SEGADORA DE IMPULSION Y AJUSTES DE PARA REEIVIPLAZAR MISION (Vea Fig. 31) (Vea Fig. 30) LA CORREA DE TRANS= La correa de imputsi6n de la cuchilla segadora se puede cambiar sin herramientas. Estacione et tractor en una superficie nivetada. Enganche el freno de estacionamiento. REMOCION DE LA CORREA - Estacione el tractor en una superficie nivetada. Ponga el freno de mano.
SERVICIO IMPRESION / INCLINACION DELANTERAS DE LAS Y AJUSTES RUEDAS PARA REMOVER LOS CABLES, INVlERTA EL ORDEN El cable NEGRO primero det chasis y luego de la bateria comptetamente cargada. Et cable ROJO al [3ttimo de ambas baterias. La impresi6n e inctinaci6n de las ruedas delanteras de su nuevo tractor vienen asi de f&brica y son normales. La impresi6n y la inclinaci6n de las ruedas delanteras no son regutables.
SERVICIO PARA CAMBIAR ANTERA LA BOMBILLA Y AJUSTES TRANSMISION DE LA LUZ DEL= REMOCION/REEMPLAZO Levante el cap& Tire el sujetador de la bombilla fuera det agujero en la parte trasera det enrejado. Cambie la bombilla en et sujetador y empuje el sujetador de la bombilta, en forma segura, hacia atr&s en et agujero en la parte trasera del enrejado. Cierre et cap6.
ALMACENAMIENTO Inmediatamente prepare su tractor para et almacenamiento at final de la temporada o si et tractor no se va a usar pot 30 dias o mas. * Vaciar et dep6sito del carburante poniendo en marcha el motor y dej_.ndolo funcionar hasta que et carburante termine et carburador este vacio. ADVERTENCIA: Nunca almacene el tractor con gasoJina en el estanque dentro de un edJficio en donde los gases pueden alcanzar una llama expuesta o una chJspa.
f IDENTIFICACION PROBLEMA No arranca El motor no la vuelta El motor suena pero no arranc8 P_rdida de fuerza CORRECCION CAUSA 1. Sin combustible. 2. Motor sin la"ESTRANGULACION" adecuada. 3. Motor ahogado. 3. Llene el estanque de combustible. Yea "PARA HACER ARRANCAR EL MOTOR" en la secciSn de operaciSn. Espere varios minutos antes detratar de arrancar. 4. 5. 6. Bujia mala. Filtro de aire sucio. Filtro de combustible 4. Cambie la bujia. 5. 6. Limpie/cambie el filtro de aire.
f IDENTIFICACION PROBLEMA DE PROBLEMAS CAUSA Vibraci6n e×cesiva El motor continua funcionando cuando el operador se baja del asiento con el embrague del accesorio enganchado CORRECCK)N 1. 2. Cuchilla desgastada, doblada o suelta. Mandril de la cuchilla doblado. 1. 2. Cambie la cuchilla. Apriete el pemo de la cuchilla. Cambie la mandril de la cuchilla. 3. Parte(s) suelta(s)/da_ada(s). 3. Apriete la(s) parte(s). Cambie las partes daSadas. 1.
TRACTOR DIAGRAMA - - MODELO NO. 917.240460, PRODUCTO NO. YTH20K46 SCHIO-s BATERIA SOLENOIDE MOTOR FUSIBLE MEDIDOR DE AMPERIOS (OPCIONAL) t BLANCO DE ARRANQUE I I RO IO tD tP I _ I , NEGRO BLANCO J ,I ©:©n I n (EMBRAGUE DESCO ACCESORIO DEL EN}BP--_GUE GRIS INTERRUPTOR NEGRO DE REVERSA (NO EN REVERSA) [ NEGRO VNEGRO NEGRO NEGRO .NEGRO NEGRO NEGRO GRIS CONECTOR DEUNION ARNES CONECTOR DE CORTOCIRCUITOS DEL CHASIS ® L_'IDAD DE ENCENDIDO qh AZUL _ F q, " q _.
TRACTOR DIAGRAMA - - MODELO NO. 917.240460, PRODUCTO NO. YTH20K46 ELECTRlCO TO6S-s 33 Con 12 Voltios (Opcional) o10 1 87 t 34 Con Contador I I Horario (Opcional) \ \ 42 41 I I I 25 \ \ t6 29 i I i I i I I 105 2 28
TRACTOR DIAGRAMA - - MODELO NO. 917.240460, PRODUCTO NO. YTH20K46 ELE_CTRlCO CODIGO NO. PIEZA NO.
TRACTOR - - MODELO NO. 917.240460, PRODUCTO NO. YTH20K46 CHASIS 297 208 203 _191 207 25 151 205 175 \ 150 176_ 176 130 181 236 36 196 \ 138 194 36 194 I I' I 68 68 287 181 I 15 €.
TRACTOR - - MODELO NO. 917.240460, PRODUCTO NO. YTH20K46 CHASIS CODIGO No. PIEZA No.
TRACTOR - - MODELO NO. 917.240460, PRODUCTO NO.
TRACTOR - - MODELO NO. 917.240460, PRODUCTO NO. YTH20K46 TRANSMISION C6DIGO No. PIEZA No.
TRACTOR - - MODELO NO. 917.240460, PRODUCTO NO. YTH20K46 MOTOR 87 82 18 15 37 i / 29 EQUIPO APAGACHISPAS 9 J engine-tex_Kohl_31 34 \85
TRACTOR - - MODELO NO. 917.240460, PRODUCTO NO. YTH20K46 MOTOR C6DIGO No. 1 2 9 12 15 18 20 21 28 29 37 42 45 69 79 81 82 85 87 90 92 94 98 97 109 111 PIEZA No.
TRACTOR ENSAMBLE f z - - MODELO NO. 917.240460, PRODUCTO NO. YTH20K46 DE LA DIRECCl6N __.12s '¢'- ,/ j// _-.C3/.. \ \ /51 I j 45 / t J f 13 28 22 57 66 19 \ 62 53 36
TRACTOR ENSAMBLE - - MODELO NO. 917.240460, PRODUCTO NO. YTH20K46 DE LA DIRECCl6N C6DIGO No. PIEZA No.
TRACTOR ENSAMBLE - - MODELO NO. 917.240460, PRODUCTO NO. YTH20K46 DEL ASIENTO 21 I 3 seat-tex C6DIGO No. 6.5SL PIEZA No. 1 2 3 532 42 40-68 532 18 01-66 532 14 06-75 6 873 80 06-00 7 8 10 21 532 532 532 532 12 17 19 17 41-81 18-77 69-77 18-52 2 DESCRIPCl6N Asiento Soporte pivotante del guardabarros Conector del ensamble del guardabarros Tuerca de presi6n c/aislamiento de 3/8-16 unc Resorte del asiento Perno de 5/16" unc x 3/4" Bandeja del asiento Perno de tope de 5/16-18 C6DIGO No.
TRACTOR ELEVAClON - - MODELO DE LA CORTADORA NO. 917.240460, PRODUCTO NO. YTH20K46 DE ClaSPED 87 87 89 10 3 100 / 2 88 97 91 101" 87 89 89 87 *Key 91 may be substituted CODIGO No. PIEZA No. 2 3 532 42 20-27 532 19 52-31 7 10 87 532 41 15-55 532 19 63-14 532 19 42-09 88 89 90 532 41 07-10 819 19 19-12 532 19 42-08 CODIGO No.
TRACTOR PLATAFORMA - - MODELO DE LA CORTADORA NO. 917.240460, PRODUCTO NO. YTH20K46 DE CO:SPED 67 46 43 A 23 42- _195 3O 113 _116 117 \ .....
TRACTOR PLATAFORMA C6DIGO No. PIEZA No.
TRACTOR - - MODELO NO. 917.240460, PRODUCTO NO. YTH20K46 CALCOMANiAS 56 10 12 C6DIGO NO. PIEZA NO. 1 2 3 5 8 9 532 532 532 532 532 532 41 42 44 42 44 14 10 532 17 05-83 C6DIGO NO.
0 or; 0 rrl m "13 rr[ OO rrl 0oo rrl 0 0 mN _rrl _._'_ _-g_ o_ / / n'-=.
12.20.10 BAD Husqvarna Impreso en los E.E.U.
