OWNER’S MANUAL Product No.
CONGRATULATIONS on the purchase of a new collection system. It has been designed, engineered and manufactured to give the best possible dependability and performance. If you experience any problem you cannot easily remedy, contact your nearest authorized service center/ department. They have competent, well-trained technicians and the proper tools for service and repairs. Please read and retain this manual. The instructions will enable you to assemble and maintain your collection system properly.
CONTENTS SAFETY.............................................................. 4 ASSEMBLY........................................................ 5 REPAIR PARTS.................................................. 8 Tips For Improved Bagging Follow the mower operation instructions in the Owner's Manual. When using the grass catcher on a lawn where grass and leaf bagging equipment has not been used previously, thatch and debris that has accumulated for long periods of time is picked up.
SAFETY Slope Operation Slopes are a major factor related to loss-of-control and tip-over accidents, which can result in severe injury or death. All slopes require extra caution. If you cannot back up the slope or if you feel uneasy on it, do not mow it. DO • Mow up and down slopes (10° Max.), not across. • Remove obstacles such as rocks, tree limbs, etc. • Watch for holes, ruts, or bumps. Uneven terrain could overturn the machine. Tall grass can hide obstacles. • Use slow speed.
assembly TOOLS REQUIRED • • • • Wrench ½" (2) Wrench 9/16" (2) Wrench 7/16" (2) Ft/Lbs Torque Wrench CONTAINER CONTENTS • • • • Drill Drill Bit 5/16" Socket and Ratchet 9/16" Standard Screwdriver • Bagger Assembly • Upper Chute • Mounting Brackets • • • Cover Assembly Lower Chute Bag of Hardware NOTE: When the terms RH (right hand) or LH (left hand) are used, it refers to when the operator is seated on the mower.
assembly MOUNTING COVER ASSEMBLY TO SUPPORT ASSEMBLY CONTAINER INSTALLATION For ease of assembly, you may wish assistance from another person for mounting the cover assembly to mower. 1. Position cover assembly on the ground behind the mower. 2. Lift and rotate cover to align the frame bracket with the hanger and slide the cover down until secure. 1. 2. Install containers on support frame, overlapping containers at center tube.
assembly UPPER CHUTE INSTALLATION 1. 2. 3. Slide upper chute onto lower chute, lining up notches and channels. Stretch bungee latch up onto acorn nut on upper chute to secure. Locate the seal fastening kit (packaged separately). Install hardware using configuration shown before drilling the next hole. Repeat procedure with each remaining hole. CHUTE / HOOD INSTALLATION Push upper chute through the gasketed opening in the cover assembly. HOOD SEAL INSTALLATION 1.
Repair parts 15 6 15 18 1 18 5 3 15 18 14 9 10 4 16 8 19 17 13 11 12 2 8 7
Repair parts ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION 1.. 539 11 11-39 ��������� 1 ������COVER ASSY, COMPLETE 11.. 539 10 80-96 ��������� 1 ������HAIRPIN, RETAINER 2.. 532 40 02-26 ��������� 2 ������CONTAINER, SOFT BAG 12.. 539 10 80-97 ��������� 3 ������CAP, TUBING END 3.. 532 12 75-33 ��������� 1 ������SCREEN, COVER 13.. 522 80 13-01 ��������� 1 ������SPACER PLUG 4.. 532 17 97-46 ��������� 1 ������FRAME, BAGGER 14.. 532 19 27-86 ��������� 1 ������PIN, HINGE 5..
Repair parts 4 11 17 5 1 3 10 12 14 7 19 18 16 6 2 18 15 8 16 9 19 13 12 10
Repair parts ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION 1.. 587 04 47-01 ��������� 1 ������CHUTE, UPPER 11.. 539 99 00-74 ��������� 1 ������BOLT ¼-20 x ¾ RDHD SQNK 2.. 587 04 49-01 ��������� 1 ������CHUTE, LOWER 12.. 871 08 10-10 ��������� 3 ������SCREW #10-24 x 5/8 3.. 539 10 80-82 ��������� 1 ������INDICATOR, BAG DUMP 13.. 532 08 71-75 ��������� 1 ������SCREW #10-24 x 11/8 4.. 532 18 09-23 ��������� 1 ������SUPPORT ASSY 14..
ARTÍ- No. DE PIEZA CULO CANT. PIEZAS DE REPARACIÓN DESCRIPCIÓN ARTÍ- No. DE PIEZA CULO CANT. DESCRIPCIÓN 539 10 80-85........ 1....... ESPACIADOR, DIVIDIDO 9.. 19.. 539 10 95-52........ 3....... ARANDELA 3/16 BLOQUEO 539 10 80-88........ 1....... PESTILLO, CUBIERTA 8.. 18.. 539 10 80-84........ 4....... ARANDELA 3/16 x ¾ 16 GA 17.. 873 80 04-00........ 1....... TUERCA ¼-20 HEX NYLOC 539 10 81-94........ 2....... CONJUNTO DE PESTILLO, CONDUCTO 7.. 16.. 539 10 80-89........ 3.......
PIEZAS DE REPARACIÓN 4 11 17 5 1 3 10 12 14 7 19 18 16 6 2 18 8 16 9 19 13 12 10
ARTÍ- No. DE PIEZA CULO CANT. PIEZAS DE REPARACIÓN DESCRIPCIÓN ARTÍ- No. DE PIEZA CULO CANT. DESCRIPCIÓN 532 13 29-83.... .... 1....... RESORTE, CUBIERTA DERECHA 9.. 532 13 27-96.... .... 1....... RESORTE, CUBIERTA IZQUIERDA 8.. 532 12 75-34.... .... 1....... JUNTA 7.. 532 13 08-95.... .... 1....... MANILLAR CON PESTILLO, CUBIERTA 6.. 532 15 50-42.... .... 1....... CORREA, REFUERZO 5.. 532 17 97-46.... .... 1....... BASTIDOR, RECOGEDOR 4.. 532 12 75-33.... .... 1.......
PIEZAS DE REPARACIÓN 15 6 1 15 18 18 5 3 15 18 14 9 10 4 16 8 19 7 17 13 11 12 2 8
MONTAJE INSTALACIÓN DEL CONDUCTO SUPERIOR 1. 2. 3. Deslice el conducto superior sobre el conducto inferior, alineando las muescas y canales. Expanda la correa elástica que se engancha en la tuerca ciega en el conducto superior para asegurar. Localice el kit de sujeción de la junta (empacado por separado). Instale la tornillería utilizando la configuración mostrada antes de perforar el siguiente orificio. Repita el procedimiento con cada orificio restante.
MONTAJE 1. Para facilitar el montaje, es posible que desee asistencia de otra persona para el montaje del conjunto de cubierta en el cortacésped. 1. Coloque el conjunto de cubierta en el suelo detrás del cortacésped. 2. Levante y gire la cubierta para alinear el soporte del bastidor con el soporte de suspensión y deslice la cubierta hacia abajo hasta que quede asegurada. INSTALACIÓN DEL CONTENEDOR MONTAJE DEL CONJUNTO DE CUBIERTA EN EL CONJUNTO DE SOPORTE 2.
HERRAMIENTAS NECESARIAS • • • • Llave de ½" (2) Llave de 9/16" (2) Llave de 7/16" (2) Llave de par de apriete de libras/pies • • • • MONTAJE CONTENIDO DEL CONTENEDOR Taladro Broca de talado de 5/16" Dado y trinquete de 9/16" Destornillador estándar IDENTIFICACIÓN DE LAS PIEZAS • Conjunto de recogedor • Conducto superior • Soportes de montaje • Conjunto de cubierta • Conducto inferior • Bolsa de tornillería NOTA: Cuando se utilicen los términos DERECHA (lado derecho) o IZQUIERDA (lado izquierdo), se
SEGURIDAD Funcionamiento en pendientes ¡ADVERTENCIA! ESTA MÁQUINA CORTADORA ES CAPAZ DE AMPUTAR MANOS Y PIES Y DE ARROJAR OBJETOS. SI NO CUMPLE CON LAS SIGUIENTES INSTRUCCIONES DE SEGURIDAD PUEDE CAUSAR DAÑOS GRAVES O LA MUERTE. Uso general • Lea, entienda y siga todas las instrucciones en el manual y en la máquina antes de comenzar. • Mantenga la máquina sin césped, hojas o acumulación de otros residuos que puedan tocar las partes calientes del escape/motor e incendiarse.
CONTENIDO SEGURIDAD...................................................... 4 MONTAJE.......................................................... 5 PIEZAS DE REPARACIÓN................................. 8 Sugerencias para mejorar el embolsado Siga las instrucciones de operación del cortacésped en el Manual del operador.
ENHORABUENA por la compra de un nuevo sistema de recolección. Ha sido diseñado, creado y fabricado para darle la mejor confiabilidad y rendimiento posibles. Si experimenta algún problema que no pueda solucionar fácilmente, comuníquese con su centro de servicio/ departamento autorizado más cercano. Ellos tienen técnicos competentes, bien entrenados y las herramientas adecuadas para realizar el servicio y las reparaciones. Por favor lea y conserve este manual.
MANUAL DEL PROPIETARIO No.