GRASS CATCHER Operator / Parts Manual 42" / 587412401 Please read the operator manual carefully and make sure you understand the instructions before using the machine.
CONGRATULATIONS on the purchase of a new collection system. It has been designed, engineered and manufactured to give the best possible dependability and performance. If you experience any problem you cannot easily remedy, contact your nearest authorized service center/ department. They have competent, well-trained technicians and the proper tools for service and repairs. Please read and retain this manual. The instructions will enable you to assemble and maintain your collection system properly.
CONTENTS SAFETY.............................................................. 4 ASSEMBLY........................................................ 5 REPAIR PARTS.................................................. 8 Tips For Improved Bagging • Follow the mower operation instructions in the Operator Manual. • When using the grass catcher on a lawn where grass and leaf bagging equipment has not been used previously, thatch and debris that has accumulated for long periods of time is picked up.
SAFETY Slope Operation Slopes are a major factor related to loss-of-control and tip-over accidents, which can result in severe injury or death. All slopes require extra caution. If you cannot back up the slope or if you feel uneasy on it, do not mow it. DO • Mow up and down slopes (10° Max.), not across. • Remove obstacles such as rocks, tree limbs, etc. • Watch for holes, ruts, or bumps. Uneven terrain could overturn the machine. Tall grass can hide obstacles. • Use slow speed.
ASSEMBLY TOOLS REQUIRED • • • • Wrench ½" (2) Wrench 9/16" (2) Wrench 7/16" (2) Ft/Lbs Torque Wrench CONTAINER CONTENTS • • • • Drill Drill Bit 5/16" Socket and Ratchet 9/16" Standard Screwdriver • Bagger Assembly • Upper Chute • Mounting Brackets • • • Cover Assembly Lower Chute Bag of Hardware NOTE: When the terms RH (right hand) or LH (left hand) are used, it refers to when the operator is seated on the mower.
ASSEMBLY MOUNTING COVER ASSEMBLY TO SUPPORT ASSEMBLY CONTAINER INSTALLATION For ease of assembly, you may wish assistance from another person for mounting the cover assembly to mower. 1. Position cover assembly on the ground behind the mower. 2. Lift and rotate cover to align the frame bracket with the hanger and slide the cover down until secure. 1. 2. Install containers on support frame, overlapping containers at center tube.
ASSEMBLY UPPER CHUTE INSTALLATION 1. 2. 3. Slide upper chute onto lower chute, lining up notches and channels. Stretch bungee latch up onto acorn nut on upper chute to secure. Locate the seal fastening kit (packaged separately). Install hardware using configuration shown before drilling the next hole. Repeat procedure with each remaining hole. CHUTE / HOOD INSTALLATION Push upper chute through the gasketed opening in the cover assembly. HOOD SEAL INSTALLATION 1.
REPAIR PARTS 15 6 15 18 1 18 5 3 15 18 14 9 10 4 16 8 19 17 13 11 12 2 8 7
REPAIR PARTS ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION 1.. 539 11 11-39 ��������� 1 ������COVER ASSY, COMPLETE 11.. 539 10 80-96 ��������� 1 ������HAIRPIN, RETAINER 2.. 532 40 02-26 ��������� 2 ������CONTAINER, SOFT BAG 12.. 539 10 80-97 ��������� 3 ������CAP, TUBING END 3.. 532 12 75-33 ��������� 1 ������SCREEN, COVER 13.. 522 80 13-01 ��������� 1 ������SPACER PLUG 4.. 532 17 97-46 ��������� 1 ������FRAME, BAGGER 14.. 532 19 27-86 ��������� 1 ������PIN, HINGE 5..
REPAIR PARTS 4 14 23 9 11 15 17 10 26 14 5 1 3 23 17 19 25 7 24 6 22 2 24 21 8 22 12 25 18 20 10 13 16 23 26 23
REPAIR PARTS ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION 1.. 587 04 47-01 ��������� 1 ������CHUTE, UPPER 14.. 874 78 05-16 ��������� 4 ������BOLT 5/16-18 x 1 2.. 587 04 49-01 ��������� 1 ������CHUTE, LOWER 15.. 874 78 05-36 ��������� 2 ������BOLT 5/16-18 x 2¼ 3.. 539 10 80-82 ��������� 1 ������INDICATOR, BAG DUMP 16.. 539 10 04-72 ��������� 2 ������BOLT RDHD SQNK 5/16-18 x 1¼ 4.. 522 85 47-02 ��������� 1 ������BRACKET, HANGER 17..
P/N 115 73 63-27 Rev B 2014-2-15