Operator′s manual 536LiL 536LiR Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.
KEY TO SYMBOLS Symbols on the machine: Arrows which show limits for handle positioning. Translation of the original Swedish operating instruction. WARNING! Trimmers can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others. It is extremely important that you read and understand the contents of the operator's manual. Please read the operator’s manual carefully and make sure you understand the instructions before using the machine. Do not expose to rain.
KEY TO SYMBOLS Symbols in the operator’s manual: You will find the following labels on your lawn trimmer, battery and battery charger: The machine is turned on and off by pressing the on and stop button. Always remove the battery to prevent the machine being started by accident. Always wear approved protective gloves. Regular cleaning is required. Visual check. Remove the battery. IMPORTANT! Always remove the battery to prevent the machine being started by accident.
CONTENTS Contents KEY TO SYMBOLS Symbols on the machine: ...................................... Symbols on the battery and/or on the battery charger: ................................................................. Symbols in the operator’s manual: ........................ CONTENTS Contents ............................................................... Note the following before starting: ........................ INTRODUCTION Dear Customer, .....................................................
INTRODUCTION Dear Customer, Congratulations on your choice to buy a Husqvarna product! Husqvarna is based on a tradition that dates back to 1689, when the Swedish King Karl XI ordered the construction of a factory on the banks of the Husqvarna River, for production of muskets. The location was logical, since water power was harnessed from the Huskvarna River to create the waterpowered plant.
WHAT IS WHAT? 6 5 7 3 12 1 2 11 4 7 13 1 14 17 8 15 12 16 6 5 18 15 19 20 21 10 9 What is what? 1 Trimmer head 12 Handle adjustment 2 Cutting attachment guard 13 Battery indicator button 3 Shaft 14 Battery status 4 Loop handle 15 Warning indicator (ERROR LED) 5 Power trigger 16 Rotation direction button 6 Keypad 17 SavE button 7 Power trigger lockout 18 Activate and deactivate button 8 Battery 19 Power on and warning indicator (ERROR LED) 9 Cord 20 Battery rele
GENERAL SAFETY PRECAUTIONS General power tool safety warnings ! WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. • Store the equipment in a lockable area so that it is out of reach of children and unauthorized persons. • Keep hands and feet away from the cutting area at all times and especially when switching on the motor. • Dress properly. Do not wear loose clothing or jewellery.
GENERAL SAFETY PRECAUTIONS Important ! ! WARNING! This machine produces an electromagnetic field during operation. This field may under some circumstances interfere with active or passive medical implants. To reduce the risk of serious or fatal injury, we recommend persons with medical implants to consult their physician and the medical implant manufacturer before operating this machine. WARNING! Never allow children to use or be in the vicinity of the machine.
GENERAL SAFETY PRECAUTIONS Battery safety Battery charger safety Li-ion The rechargeable Husqvarna batteries, BLi, are exclusively used as a power supply for the relevant Husqvarna cordless appliances. To avoid injury, the battery must not be used as a power source for other devices. Li-ion Only use Chargers, Husqvarna QC, for charging the Husqvarna replacement batteries, BLi. ! ! ! ! Never insert any object into the charger’s cooling slots.
GENERAL SAFETY PRECAUTIONS Do not charge: Control panel • non-rechargeable batteries in the battery charger or use them in the machine. • the battery in the battery charger outdoors. Make sure the machine is switched on or off when the activate/deactivate button (1) is pressed and held (>1 sec.). The green LED (2) is lit or turned off. • the battery in the rain or in wet conditions. • the battery in direct sunlight.
GENERAL SAFETY PRECAUTIONS Make sure the power trigger is locked when the power trigger lock is in its original position. Check that the guard is undamaged and not cracked. Replace the guard if it has been exposed to impact or is cracked. Always use the recommended guard for the cutting attachment you are using. See chapter on Technical data. ! ! Press the power trigger and make sure it returns to its original position when you release it.
GENERAL SAFETY PRECAUTIONS Trimmer head ! WARNING! Always use recommended trimmer line. See technical data. Failure to follow this instruction may cause personal injury. IMPORTANT! Always ensure the trimmer line is wound tightly and evenly around the drum, otherwise the machine will generate harmful vibration. • Only use the recommended trimmer heads and trimmer lines. These have been tested by the manufacturer to suit a particular motor size.
ASSEMBLY Fitting the loop handle • Tighten the knob. Li-ion • Clip the loop handle onto the shaft. Note that the loop handle must be fitted between the arrows on the shaft. Assembling the guard Li-ion • Slide the spacer into the slot in the loop handle. • Fit the nut, knob and screw. Do not overtighten. • Now adjust the trimmer to give a comfortable working position. Tighten the bolt/knob. • Fit the correct trimmer guard (A) for use with the trimmer head.
ASSEMBLY Standard harness Correct balance Quick release Let the trimmer head balance at a comfortable cutting height, i.e. close to the ground. At the front is an easily accessible, quick release. Use this if the engine catches fire or in any other emergency situation that requires you to free yourself from the machine and harness. Spreading the load on your shoulders A well-adjusted harness and machine makes work much easier. Adjust the harness for the best working position.
BATTERY HANDLING Battery status The battery must be charged before using it the first time. The battery is only 30% charged when delivered. The display shows the battery capacity and if there are any problems with the battery. The battery capacity is displayed for 5 seconds after the machine is switched off or the battery indicator button is pressed. The warning symbol on the battery is lit when an error has occurred. See fault codes.
BATTERY HANDLING Transport and storage Li-ion • The contained lithium-ion-batteries are subject to the Dangerous Goods Legislation requirements. • For commercial transports e.g. by third parties, forwarding agents, special requirement on packing and labeling must be observed. • For preparation of the item being shipped, consulting an expert for hazardous material is required. Please also observe possibly more detailed national regulations.
STARTING AND STOPPING Check before starting Starting and stopping Li-ion • Check the motor for dirt and cracks. Clean off grass and leaves from the engine using a brush. Gloves should be worn when necessary. • Check that the trimmer head is completely attached to the trimmer. • Check that the machine is in perfect working order. Check that all nuts and screws are tight. • Check that the trimmer head and trimmer guard are not damaged or cracked.
WORKING TECHNIQUES General working instructions Safety instructions while working • Make sure you can move and stand safely. Check the area around you for possible obstacles (roots, rocks, branches, ditches, etc.) in case you have to move suddenly. Take great care when working on sloping ground. • Do not overreach. Keep proper footing and balance at all times. • Always hold the machine with both hands. Hold the machine on the right side of your body.
WORKING TECHNIQUES ! WARNING! Neither the operator of the machine nor anyone else may attempt to remove the cut material while the motor is running or the cutting attachment is rotating, as this can result in serious injury. Rotation direction It is possible to change the rotation direction of the trimmer head in any position, at full speed or at stop postion.
WORKING TECHNIQUES Clearing • The clearing technique removes all unwanted vegetation. Keep the trimmer head just above the ground and tilt it. Let the end of the line strike the ground around trees, posts, statues and the like. CAUTION! This technique increases the wear on the line. • The line wears quicker and must be fed forward more often when working against stones, brick, concrete, metal fences, etc., than when coming into contact with trees and wooden fences.
MAINTENANCE Inspection and maintenance Trimmer line Check the line by threading it into the hole on the cover, as shown in the illustration. Li-ion ! WARNING! Always remove the battery before any maintenance on the machine. IMPORTANT! Never clean the battery or the battery charger with water. Strong cleaning agents can damage the plastic. All servicing and repair work on the machine requires special training. This is especially true of the machine′s safety equipment.
MAINTENANCE Troubleshooting schedule Troubleshooting takes place from the keypad. Keypad Control panel Possible faults Possible action Green activate LED flashing. Low battery voltage. Charging the battery The power trigger and the activate button are pressed at the same time. Release the power trigger and the machine is active. The trimmerhead is jammed. Error LED flashes. Overload. Remove the battery from the machine. Release the trimmer head from grass.
MAINTENANCE Maintenance schedule Li-ion ! WARNING! Always remove the battery before any maintenance on the machine. The following is a list of the maintenance steps that must be performed on the machine. Most of the items are described in the Maintenance section. The user must only carry out the maintenance and service work described in this Operator's Manual. More extensive work must be carried out by an authorized service workshop.
TECHNICAL DATA Technical data 536LiL 536LiR Motor Motor type BLDC (brushless) 36V BLDC (brushless) 36V Speed of output shaft, rpm 5500 5500 Cutting width, mm 400 400 Weight without battery, kg 3 3,8 Weight with battery, kg 4,2 5 60 60 Sound power level, measured dB (A) 92 92 Sound power level, guaranteed LWA dB (A) 96 96 Equivalent sound pressure level at the operator’s ear, measured according to EN ISO 60335-91-2 and ISO 81 22868, dB(A): 76 Weight Battery runtime Battery runtime,
TECHNICAL DATA EC Declaration of Conformity (Applies to Europe only) We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare that the battery lawn trimmers Husqvarna 536LiL, 536LiR with serial numbers dating from 2012 onwards (the year is clearly stated on the rating plate, followed by the serial number), comply with the requirements of the COUNCIL’S DIRECTIVE: - of May 17, 2006 ”relating to machinery” 2006/42/EC.
T25B 1 Li-ion 2 2,0 mm .
1156476-26 ´®z+XO^¶6c¨ ´®z+XO^¶6c¨ 2014-01-23