Rhein Tech Laboratories, Inc. 360 Herndon Parkway Suite 1400 Herndon, VA 20170 http://www.rheintech.com Appendix M: Client: Hunter Engineering Company Model: 45-1443 Standards: FCC 15.247/IC RSS-210 ID’s: LS3-45-1443/2938A-451443 Report #: 2013040 Manual Please refer to the following pages.
Form 3850-T, 02-13 Supersedes Form 3850-T, 03-11 WinAlign® Alignment Software Operation Manual Version 14.
Contents 1. Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 1.1 General Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 1.2 System Requirements . . . . . .
2. Basic Operation Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 2.1 Sensors and Targets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 TD Target™ Alignment Reflectors and Quickgrip™ Adaptors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 TD Target™ Alignment Reflectors . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.4 2.5 2.6 2.7 CONTENTS Downloading Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Viewing Adjustment Illustrations in WebSpecs® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Parts Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Printing WebSpecs® Adjustment Illustrations . .
Measuring Ride Height Using the Romess Inclinometer for Mercedes . . . . . . . . . . . . . . . . . . 105 Ride Height Bar Graphs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 Cross Ride Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 Ride Height Dependent Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 Zoom .
Shop Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 Reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151 HunterUser.com Web Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151 Hunter Web Site . . . . . . . . . . . . . . . . . . .
5.4 5.5 5.6 5.7 5.8 5.9 8 About Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194 About Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194 Setting Up the Caster Measurement Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195 Setting Up the Reduce Number of Softkeys: Enable/Disable . .
5.10 5.11 5.12 5.13 5.14 5.15 5.16 Setting Up VirtualView® WinToe® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 Setting Up Live or Manual Ride Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 Setting Up Tools and Kits Internet Ordering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 Inspection . . . . . . . . . . . . . . . . . . . .
Adding a New Vehicle to a Customer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245 Changing the Customer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245 Deleting a Customer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246 Deleting a Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7. Equipment Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283 7.1 Conventional Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283 Care and Cleaning of Conventional Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283 HF Pod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.11 Conventional Sensor Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302 Calibration General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302 Mounting DSP Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303 Leveling the Calibration Fixture . . . . . . . . . . . . . . . . .
Rear Springs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324 9. Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325 9.1 Alignment Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325 Geometric Centerline Alignment . . . . . .
THIS PAGE INTENTIONALLY LEFT BLANK 14
1. Getting Started 1.1 General Introduction This manual provides operation instructions and information required to operate the WA Series aligner with WinAlign® software. WinAlign software version 14.x is a 64-bit program and is compatible only with Windows® Vista or Windows® 7. With HawkEye Elite HE421 Series Sensors, every alignment is a Picture Perfect® alignment.
1.2 System Requirements WinAlign® software version 14.x is a 64-bit program that is compatible with only WA Series aligners with 1GB of RAM or higher running Windows® Vista or Windows® 7. Required Software that will be installed by the WinAlign software 14.x Installer: Microsoft® DirectX® 9.0c or later. 1.3 For Your Safety - Hazard Definitions These symbols identify situations that could be detrimental to your safety and/or cause equipment damage.
Verify that the electrical supply circuit and the receptacle are properly grounded. To reduce the risk of electrical shock, do not use on wet surfaces or expose to rain. Verify that the appropriate electrical supply circuit is the same voltage and amperage ratings as marked on the aligner before operating. To reduce the risk of fire, do not operate equipment in the vicinity of open containers of flammable liquids (gasoline). Keep all instructions permanently with the unit.
Specific Precautions/Power Source Alternating current. North America The PC aligner is intended to operate from a power source that will apply 120 VAC (nominal) 50/60 Hz between the supply conductors of the power cordset. Earth ground terminal. Protective conductor terminal. I ON (supply) condition. OFF (supply) condition. Other Regions The PC aligner is intended to operate from a power source that will apply 230 VAC (nominal) 50/60 Hz between the supply conductors of the power cordset.
