User's Manual

ManualsBrandsHunter Douglas Window Fashions ManualsElectronicsMotor Control

NOT FOR DISTRIBUTION

PowerView

™

AC motor

Quick Start Guide

— Release Candidate —

1 of 11

Daughterboard Firmware: PV_AC_Radio_1.0.5_SVN2049

Motherboard (G2071SM_B) Firmware: REV2.1

DESCRIPTION

The PowerView™ AC motor is designed to operate Hunter Douglas Designer Roller Shades,

Designer Screen Shades, and Alustra

Woven Textures

& Screen Shades. The PowerView AC

motor works in combination with the PowerView

™

Remote Control, PowerView Hub, and

PowerView App for radio frequency (RF) control of a single shade or multiple networked shades.

The current version of the motor does not fully support tilt products. The PowerView Remote

Control LEFT and RIGHT buttons can be used to move the motor small, incremental amounts to

approximate tilting, and are used to more accurately position limits or the Favorite position.

Important: The Beta test motors that were sent do not have default limits set. Limits will need

to be set, before normal operation can be commenced.

GENERAL INFORMATION

Limits

Production PowerView AC motors will not have default limits set. The user/installer must set

limits.

The user/installer can change the motor direction when the motor has no limits.

When limits are not set, the motor responds to the Remote OPEN/CLOSE command with a

single jog in the appropriate direction.

When both limits are set, the motor responds to the Remote OPEN/CLOSE command by

running to the desired limit.

Move the Motor with the Push Button

The push button on the motor head can be used to move the motor up and down. The

direction of motor movement toggles between UP and DOWN. For motor movement actions,

the push button acts on release.

1. Press and release the push button on the motor head. The motor will move in direction

2. While the motor is moving, press and release the push button on the motor head. The

motor will stop.

3. Press and release the push button on the motor head. The motor will move in direction

4. While the motor is moving, press and release the push button on the motor head. The

motor will stop.

PREREQUISITES

A user/installer must be familiar with the setup and use of the following:

 PowerView Remote Control or PowerView™ Scene Controller

Summary of content (11 pages)

PAGE 1
PowerView™ AC motor Quick Start Guide NOT FOR DISTRIBUTION — Release Candidate — Daughterboard Firmware: PV_AC_Radio_1.0.5_SVN2049 Motherboard (G2071SM_B) Firmware: REV2.1 DESCRIPTION The PowerView™ AC motor is designed to operate Hunter Douglas Designer Roller Shades, Designer Screen Shades, and Alustra® Woven Textures® & Screen Shades.
PAGE 2
PowerView™ AC motor Quick Start Guide NOT FOR DISTRIBUTION    — Release Candidate — PowerView Hub PowerView™ Repeater PowerView App Please see the PowerView Instructional Guides and FAQs at the following URL: http://www.hunterdouglas.
PAGE 3
PowerView™ AC motor Quick Start Guide NOT FOR DISTRIBUTION b) c) d) e) f) g) — Release Candidate — On the Remote, press and hold the STOP button until LEDs begin to blink. On the Remote, verify no Group LEDs are on solid. On the Motor, press and hold the push button on the Motor head. On the Remote, press and release the OPEN button. The Motor will jog twice after the upper limit is set. On the Motor, release the push button. 5.
PAGE 4
PowerView™ AC motor Quick Start Guide NOT FOR DISTRIBUTION — Release Candidate — Figure 1 APPENDIX --------------------------------------------------------------------------------------------------------------------------- CLEAR MOTOR LIMITS Clear Upper Limit (with Remote) 1. 2. 3. 4. 5. 6. Wake up the Remote. On the motor, press and hold the push button. On the Remote, verify no Group LEDs are on solid. On the Remote, press and release the UP button.
PAGE 5
PowerView™ AC motor Quick Start Guide NOT FOR DISTRIBUTION — Release Candidate — --------------------------------------------------------------------------------------------------------------------------- CLEAR NETWORK INFO 1. On the Motor, press and hold the push button on the Motor head for approximately 6 seconds. 2. The motor will jog two times after 6 seconds have elapsed. 3. On the Motor, continue to press and hold the push button on the Motor head for another 6 seconds. 4.
PAGE 6
PowerView™ AC motor Quick Start Guide NOT FOR DISTRIBUTION — Release Candidate — --------------------------------------------------------------------------------------------------------------------------- FACTORY RESET 1. On the Motor, press and hold the push button on the Motor head for approximately 6 seconds. 2. The motor will jog two times after 6 seconds have elapsed. 3. On the Motor, continue to press and hold the push button on the Motor head for another 6 seconds. 4.
PAGE 7
PowerView™ AC motor Quick Start Guide NOT FOR DISTRIBUTION — Release Candidate — 1. Simultaneously short UP and DOWN dry contacts to COMMON for less than 1.5 seconds, then release. Stops the motor, if the motor is moving. A. Detail The PowerView AC motor is designed to be used with rolling window coverings. The M40PV330 / M40PV334 / M40PV430 / M40PV620 / M40PV624 / M40PV915 motor models are designed for connection with an electrical outlet.
PAGE 8
PowerView™ AC motor Quick Start Guide NOT FOR DISTRIBUTION — Release Candidate — M50PV1234 12 34 1.1 M50PV1530 15 30 1.1 M50PV2017 20 17 0.8 M50PV2521 25 21 0.8 M50PV3017 30 17 1.2 M50PV3521 35 21 1.2 M50PV4016 40 16 1.5 M50PV4017 40 17 1.8 M50PV5014 50 14 1.5 Never exceed the lift capacity from the above table. A Motor that is cool may run for up to 4 minutes continuously before thermal overload.
PAGE 9
PowerView™ AC motor Quick Start Guide NOT FOR DISTRIBUTION — Release Candidate — As with any 120V~ or 220V~ electrical appliance, care must be taken, when handling. To reduce the risk of electric shock, this equipment has a grounding type plug, that has a third (grounding) pin. Motor models M40PV330 / M40PV334 / M40PV430 / M40PV620 / M40PV624 / M40PV915 are supplied with UL rated grounding power cords that have a grounding pin which shall not be altered or removed.
PAGE 10
PowerView™ AC motor Quick Start Guide NOT FOR DISTRIBUTION — Release Candidate — DECLARATIONS U.S. Radio Frequency FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
PAGE 11
PowerView™ AC motor Quick Start Guide NOT FOR DISTRIBUTION — Release Candidate — European Conformity We, the undersigned, Hunter Douglas Window Fashions One Duette Way, Broomfield, CO 80020, USA Hunter Douglas Europe B.V. Piekstraat 2, 3071 EL Rotterdam, The Netherlands certify and declare under our sole responsibility that assembly PV4 conforms with the essential requirements of the EMC directive 2004/108/EC and R&TTE directive 1999/5/EC.